s3

type AbortIncompleteMultipartUpload struct {
	// Relative expiration time: The expiration time in days after the last modified time
	DaysAfterInitiation *int64 `type:"integer"`
	// objects created before the date will be expired
	Date *string `type:"string"`
}

type AbortMultipartUploadInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// Confirms that the requester knows that she or he will be charged for the
	// request. Bucket owners need not specify this parameter in their requests.
	// Documentation on downloading objects from requester pays buckets can be found
	// at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
	RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string"`

	UploadID *string `location:"querystring" locationName:"uploadId" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type AbortMultipartUploadOutput struct {
	// If present, indicates that the requester was successfully charged for the request.
	RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type AccessControlPolicy struct {
	// A list of grants.
	Grants []*Grant `locationName:"AccessControlList" locationNameList:"Grant" type:"list"`

	Owner *Owner `type:"structure"`
	// contains filtered or unexported fields
}

type AccessMonitorConfiguration struct {
	// Specifies whether to enable access tracking for the bucket. The value range is as follows:
	// Enabled: After the bucket enables access tracking, the access tracking enable time is used as the default
	// last access time for all objects in the bucket.
	// Disabled: The access tracking status of the bucket can be changed to Disabled only when the bucket does not
	// have a lifecycle rule based on the last access time matching rule.
	Status *string `locationName:"Status" type:"string" required:"true"`
}

type And struct {
	Prefix *string `type:"string"`
	Tags   []*Tag  `locationName:"Tag" type:"list" flattened:"true"`
}

type AppendObjectInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// The name of the object.
	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// The starting position of the AppendObject operation.
	// When the AppendObject operation is successful, the x-kss-next-append-position header describes the starting position of the next operation.
	Position *int64 `location:"querystring" locationName:"position" type:"integer" required:"true"`

	// The readable body payload to send to KS3.
	Body io.Reader `type:"blob"`

	// The canned ACL to apply to the object.
	ACL *string `location:"header" locationName:"x-amz-acl" type:"string"`

	// Specifies caching behavior along the request/reply chain.
	CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"`

	// Specifies presentational information for the object.
	ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"`

	// Specifies what content encodings have been applied to the object and thus
	// what decoding mechanisms must be applied to obtain the media-type referenced
	// by the Content-Type header field.
	ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"`

	// Size of the body in bytes. This parameter is useful when the size of the
	// body cannot be determined automatically.
	ContentLength *int64 `location:"header" locationName:"Content-Length" type:"integer"`

	// Calculate MD5 value for message content (excluding header)
	ContentMD5 *string `location:"header" locationName:"Content-MD5" type:"string"`

	// A standard MIME type describing the format of the object data.
	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// When using Expect: 100-continue, the client will only send the request body after receiving confirmation from the server.
	// If the information in the request header is rejected, the client will not send the request body.
	Expect *string `location:"header" locationName:"Expect" type:"string"`

	// The date and time at which the object is no longer cacheable.
	Expires *time.Time `location:"header" locationName:"Expires" type:"timestamp" timestampFormat:"rfc822"`

	// A map of metadata to store with the object in S3.
	Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"`

	// The type of storage to use for the object. Defaults to 'STANDARD'.
	StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string"`

	// Set the maximum allowed size for a single addition of content
	ContentMaxLength *int64 `location:"header" locationName:"x-amz-content-maxlength" type:"integer"`

	// Specifies the object tag of the object. Multiple tags can be set at the same time, such as: TagA=A&TagB=B.
	// Note: Key and Value need to be URL-encoded first. If an item does not have "=", the Value is considered to be an empty string.
	Tagging *string `location:"header" locationName:"x-amz-tagging" type:"string"`

	// Allows grantee to read the object data and its metadata.
	GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"`

	// Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
	GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"`

	// The Server-side encryption algorithm used when storing this object in KS3, eg: AES256.
	ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string"`

	// Specifies the algorithm to use to when encrypting the object, eg: AES256.
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// Specifies the customer-provided encryption key for KS3 to use in encrypting data.
	SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"`

	// Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	// Progress callback function
	ProgressFn aws.ProgressFunc `location:"function"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type AppendObjectOutput struct {
	// Entity tag for the uploaded object.
	ETag *string `location:"header" locationName:"ETag" type:"string"`

	// The position that should be provided for the next request, which is the size of the current object.
	NextAppendPosition *int64 `location:"header" locationName:"x-amz-next-append-position" type:"integer"`

	// The type of Object.
	ObjectType *string `location:"header" locationName:"x-amz-object-type" type:"string"`

	// The Server-side encryption algorithm used when storing this object in KS3, eg: AES256.
	ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string"`

	// If server-side encryption with a customer-provided encryption key was requested,
	// the response will include this header confirming the encryption algorithm used.
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// If server-side encryption with a customer-provided encryption key was requested,
	// the response will include this header to provide round trip message integrity
	// verification of the customer-provided encryption key.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type ApplyServerSideEncryptionByDefault struct {
	// The server-side encryption algorithm to be used by the bucket's default encryption configuration.
	SSEAlgorithm *string `locationName:"SSEAlgorithm" type:"string" required:"true"`
}

type AsyncMirrorRule struct {
	MirrorUrls    []*string      `json:"mirror_urls,omitempty" required:"true" locationName:"mirror_urls"`
	SavingSetting *SavingSetting `json:"saving_setting,omitempty" required:"true" locationName:"saving_setting"`
	MirrorType    *string        `json:"mirror_type,omitempty" locationName:"mirror_type"`
}

type Body struct {
	io.ReadCloser
}

type Bucket struct {
	// Date the bucket was created.
	CreationDate *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The name of the bucket.
	Name *string `type:"string"`

	Region *string `type:"string"`

	Type *string `type:"string"`

	// Bucket visit type, NORMAL is the standard type, FREQUENTLIST is the high-frequency enumeration type.
	VisitType *string `type:"string"`

	// The bucket data redundancy type.
	DataRedundancyType *string `type:"string"`
	// contains filtered or unexported fields
}

type BucketAllowAccess struct {
	// List of Bucket names that are allowed to be accessed.
	Names []string `locationName:"Name" type:"list" flattened:"true"`
}

type BucketDecompressPolicy struct {
	Rules []*DecompressPolicyRule `json:"rules,omitempty" type:"list" locationName:"rules" required:"true"`
}

type BucketEncryptionRule struct {
	// The child element of the default encryption configuration for the bucket.
	ApplyServerSideEncryptionByDefault *ApplyServerSideEncryptionByDefault `locationName:"ApplyServerSideEncryptionByDefault" type:"structure" required:"true"`
}

type BucketLoggingStatus struct {
	LoggingEnabled *LoggingEnabled `type:"structure"`
	// contains filtered or unexported fields
}

type BucketMirror struct {
	Version          *string            `json:"version" type:"string" locationName:"version"`
	UseDefaultRobots *bool              `json:"use_default_robots" locationName:"use_default_robots"`
	AsyncMirrorRule  *AsyncMirrorRule   `json:"async_mirror_rule,omitempty" type:"structure" locationName:"async_mirror_rule"`
	SyncMirrorRules  []*SyncMirrorRules `json:"sync_mirror_rules,omitempty" type:"list" locationName:"sync_mirror_rules"`
	CreatedTime      *string            `json:"created_time,omitempty" type:"string" locationName:"created_time"`
	LastModifiedTime *string            `json:"last_modified_time,omitempty" type:"string" locationName:"last_modified_time"`
}

type BucketNotification struct {
	// 事件通知规则信息。
	// 每个Bucket最多可同时配置10个事件通知规则。
	Notifications []*Notification `locationName:"Notifications" type:"list"`
}

type BucketQosConfiguration struct {
	// Set the bucket flow control quota.
	Quotas []*BucketQosQuota `locationName:"Quota" type:"list" flattened:"true" required:"true"`
}

type BucketQosQuota struct {
	// Specify the storage medium type that needs flow control. Options: Extreme/Normal (default)
	// Extreme: SSD type storage medium
	// Normal (default): HDD type storage medium
	StorageMedium *string `locationName:"StorageMedium" type:"string"`

	// External network upload bandwidth, in Gbps, the value must be a positive integer.
	ExtranetUploadBandwidth *int64 `locationName:"ExtranetUploadBandwidth" type:"integer"`

	// Intranet network upload bandwidth, in Gbps, the value must be a positive integer.
	IntranetUploadBandwidth *int64 `locationName:"IntranetUploadBandwidth" type:"integer"`

	// External network download bandwidth, in Gbps, the value must be a positive integer.
	ExtranetDownloadBandwidth *int64 `locationName:"ExtranetDownloadBandwidth" type:"integer"`

	// Intranet network download bandwidth, in Gbps, the value must be a positive integer.
	IntranetDownloadBandwidth *int64 `locationName:"IntranetDownloadBandwidth" type:"integer"`

	// The occupied extranet upload bandwidth, in Gbps, the value must be a positive integer.
	OccupyExtranetUploadBandwidth *int64 `locationName:"OccupyExtranetUploadBandwidth" type:"integer"`

	// The occupied intranet upload bandwidth, in Gbps, the value must be a positive integer.
	OccupyIntranetUploadBandwidth *int64 `locationName:"OccupyIntranetUploadBandwidth" type:"integer"`

	// The occupied extranet download bandwidth, in Gbps, the value must be a positive integer.
	OccupyExtranetDownloadBandwidth *int64 `locationName:"OccupyExtranetDownloadBandwidth" type:"integer"`

	// The occupied intranet download bandwidth, in Gbps, the value must be a positive integer.
	OccupyIntranetDownloadBandwidth *int64 `locationName:"OccupyIntranetDownloadBandwidth" type:"integer"`
}

type BucketQuota struct {
	// 指定桶空间配额值，单位为字节，取值必须为正整数。取值范围为1~9223372036854775807。
	StorageQuota *int64 `locationName:"StorageQuota" type:"integer" required:"true"`
}

type BucketRankData struct {
	// Bucket的存储量，单位是Bytes
	DataSize []map[string]*string `locationName:"DataSize" type:"list"`

	// Bucket的外网下行流量，单位是Bytes
	Flow []map[string]*string `locationName:"Flow" type:"list"`

	// Bucket的GET类请求次数，单位是次
	RequestsGet []map[string]*string `locationName:"RequestsGet" type:"list"`

	// Bucket的PUT类请求次数，单位是次
	RequestsPut []map[string]*string `locationName:"RequestsPut" type:"list"`
}

type BucketRankResult struct {
	// 响应码
	Code *string `locationName:"Code" type:"string"`

	// 响应信息
	Message *string `locationName:"Message" type:"string"`

	// 桶用量排序数据
	Data *BucketRankData `locationName:"Data" type:"structure"`

	// 请求ID
	RequestId *string `locationName:"RequestId" type:"string"`
}

type BucketRetentionConfiguration struct {
	// Whether to enable multiple versions in the recycle bin. When the request does not carry this parameter,
	// multiple versions are enabled by default.
	EnableMultipleVersion *bool `locationName:"EnableMultipleVersion" type:"boolean"`

	// A container that contains a specific rule for the recycle bin.
	Rule *RetentionRule `locationName:"Rule" type:"structure" required:"true"`
}

type CORSConfiguration struct {
	Rules []*CORSRule `locationName:"CORSRule" type:"list" flattened:"true"`

	// Whether non-cross-domain requests return the Vary: Origin header.
	NonCrossOriginResponseVary *bool `locationName:"NonCrossOriginResponseVary" type:"boolean" xml:"NonCrossOriginResponseVary"`
}

type CORSRule struct {
	AllowedHeaders []string `locationName:"AllowedHeader" type:"list" flattened:"true"`
	AllowedMethods []string `locationName:"AllowedMethod" type:"list" flattened:"true"`
	AllowedOrigins []string `locationName:"AllowedOrigin" type:"list" flattened:"true"`
	ExposeHeaders  []string `locationName:"ExposeHeader" type:"list" flattened:"true"`
	MaxAgeSeconds  *int64   `locationName:"MaxAgeSeconds"`
}

type ClearObjectInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// The key of the object.
	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// Specify the deletion ID of the deleted object.
	RetentionId *string `location:"header" locationName:"x-kss-retention-id" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type ClearObjectOutput struct {
	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type CommonPrefix struct {
	Prefix *string `type:"string"`
	// contains filtered or unexported fields
}

type CompleteMultipartUploadInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	MultipartUpload *CompletedMultipartUpload `locationName:"CompleteMultipartUpload" type:"structure"`

	// Confirms that the requester knows that she or he will be charged for the
	// request. Bucket owners need not specify this parameter in their requests.
	// Documentation on downloading objects from requester pays buckets can be found
	// at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
	RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string"`

	UploadID *string `location:"querystring" locationName:"uploadId" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Specifies whether the object is forbidden to overwrite.
	ForbidOverwrite *bool `location:"header" locationName:"x-amz-forbid-overwrite" type:"boolean"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type CompleteMultipartUploadOutput struct {
	Bucket *string `type:"string"`

	// Entity tag of the object.
	ETag *string `type:"string"`

	// If the object expiration is configured, this will contain the expiration
	// date (expiry-date) and rule ID (rule-id). The value of rule-id is URL encoded.
	Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"`

	Key *string `type:"string"`

	Location *string `type:"string"`

	ChecksumCRC64ECMA *string `type:"string"`

	// If present, indicates that the requester was successfully charged for the
	// request.
	RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string"`

	// If present, specifies the ID of the AWS Key Management Service (KMS) master
	// encryption key that was used for the object.
	SSEKMSKeyID *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"`

	// The Server-side encryption algorithm used when storing this object in KS3, eg: AES256.
	ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string"`

	// If server-side encryption with a customer-provided encryption key was requested,
	// the response will include this header confirming the encryption algorithm used.
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// If server-side encryption with a customer-provided encryption key was requested,
	// the response will include this header to provide round trip message integrity
	// verification of the customer-provided encryption key.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	// Version of the object.
	VersionID *string `location:"header" locationName:"x-amz-version-id" type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type CompletedMultipartUpload struct {
	Parts []*CompletedPart `locationName:"Part" type:"list" flattened:"true"`
	// contains filtered or unexported fields
}

type CompletedPart struct {
	// Entity tag returned when the part was uploaded.
	ETag *string `type:"string"`

	// Part number that identifies the part.
	PartNumber *int64 `type:"integer"`

	// CRC64 value of a single part
	ChecksumCRC64ECMA *string `type:"string"`
	// contains filtered or unexported fields
}

type CompletedParts []*CompletedPart

type Condition struct {
	// The HTTP error code when the redirect is applied. In the event of an error,
	// if the error code equals this value, then the specified redirect is applied.
	// Required when parent element Condition is specified and sibling KeyPrefixEquals
	// is not specified. If both are specified, then both must be true for the redirect
	// to be applied.
	HTTPErrorCodeReturnedEquals *string `locationName:"HttpErrorCodeReturnedEquals" type:"string"`

	// The object key name prefix when the redirect is applied. For example, to
	// redirect requests for ExamplePage.html, the key prefix will be ExamplePage.html.
	// To redirect request for all pages with the prefix docs/, the key prefix will
	// be /docs, which identifies all objects in the docs/ folder. Required when
	// the parent element Condition is specified and sibling HttpErrorCodeReturnedEquals
	// is not specified. If both conditions are specified, both must be true for
	// the redirect to be applied.
	KeyPrefixEquals *string `type:"string"`
	// contains filtered or unexported fields
}

type Copier struct {
	CompletedSize int64
	// contains filtered or unexported fields
}

type CopyCheckpoint struct {
	Magic                 string
	MD5                   string
	CpFilePath            string           // checkpoint file full path
	BucketName            string           // Bucket name
	ObjectKey             string           // Object key
	SrcBucketName         string           // Source bucket name
	SrcObjectKey          string           // Source object key
	SrcObjectSize         int64            // Source object size
	SrcObjectLastModified string           // Source object last modified time
	PartSize              int64            // Part size
	UploadId              string           // Upload ID
	PartETagList          []*CompletedPart // Completed parts
}

type CopyFileInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Object key of the object.
	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// The name of the source bucket.
	SourceBucket *string `location:"uri" locationName:"SourceBucket" type:"string" required:"true"`

	// Object key of the source object.
	SourceKey *string `location:"uri" locationName:"SourceKey" type:"string" required:"true"`

	// The size of each part.
	PartSize *int64 `type:"integer"`

	// The number of tasks to upload the file.
	TaskNum *int64 `type:"integer"`

	// Whether to enable checkpoint.
	EnableCheckpoint *bool `type:"boolean"`

	// The directory to store the checkpoint file.
	CheckpointDir *string `type:"string"`

	// The checkpoint file path.
	CheckpointFile *string `type:"string"`

	// The canned ACL to apply to the object.
	ACL *string `location:"header" locationName:"x-amz-acl" type:"string"`

	// Specifies caching behavior along the request/reply chain.
	CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"`

	// Specifies presentational information for the object.
	ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"`

	// Specifies what content encodings have been applied to the object and thus
	// what decoding mechanisms must be applied to obtain the media-type referenced
	// by the Content-Type header field.
	ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"`

	// A standard MIME type describing the format of the object data.
	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// The date and time at which the object is no longer cacheable.
	Expires *time.Time `location:"header" locationName:"Expires" type:"timestamp" timestampFormat:"rfc822"`

	// A map of metadata to store with the object in S3.
	Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"`

	// Specifies whether the metadata is copied from the source object or replaced
	// with metadata provided in the request.
	MetadataDirective *string `location:"header" locationName:"x-amz-metadata-directive" type:"string"`

	// The type of storage to use for the object. Defaults to 'STANDARD'.
	StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string"`

	// Specifies the object tag of the object. Multiple tags can be set at the same time, such as: TagA=A&TagB=B.
	// Note: Key and Value need to be URL-encoded first. If an item does not have "=", the Value is considered to be an empty string.
	Tagging *string `location:"header" locationName:"x-amz-tagging" type:"string"`

	// Specifies how to set the object tag of the target object.
	// Default value: COPY
	// Valid values:
	// COPY (default value): Copies the object tag of the source object to the target object.
	// REPLACE: Ignores the object tag of the source object and directly uses the object tag specified in the request.
	TaggingDirective *string `location:"header" locationName:"x-amz-tagging-directive" type:"string"`

	// Specifies whether the object is forbidden to overwrite.
	ForbidOverwrite *bool `location:"header" locationName:"x-amz-forbid-overwrite" type:"boolean"`

	// Allows grantee to read the object data and its metadata.
	GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"`

	// Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
	GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"`

	// Copies the object if its entity tag (ETag) matches the specified tag.
	CopySourceIfMatch *string `location:"header" locationName:"x-amz-copy-source-if-match" type:"string"`

	// Copies the object if it has been modified since the specified time.
	CopySourceIfModifiedSince *time.Time `location:"header" locationName:"x-amz-copy-source-if-modified-since" type:"timestamp" timestampFormat:"rfc822"`

	// Copies the object if its entity tag (ETag) is different from the specified ETag.
	CopySourceIfNoneMatch *string `location:"header" locationName:"x-amz-copy-source-if-none-match" type:"string"`

	// Copies the object if it hasn't been modified since the specified time.
	CopySourceIfUnmodifiedSince *time.Time `location:"header" locationName:"x-amz-copy-source-if-unmodified-since" type:"timestamp" timestampFormat:"rfc822"`

	// Specifies the decryption algorithm used to decrypt the data source object. Valid value: AES256.
	CopySourceSSECustomerAlgorithm *string `location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-algorithm" type:"string"`

	// The base64-encoded encryption key used for KS3 decryption specified by the user.
	// Its value must be the same as the key used when the data source object was created.
	CopySourceSSECustomerKey *string `location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-key" type:"string"`

	// Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321.
	// If the server encrypted with a user-provided encryption key, when decryption is requested,
	// the response will include this header to provide data consistency verification information
	// for the user-provided encryption key.
	CopySourceSSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-key-MD5" type:"string"`

	// The Server-side encryption algorithm used when storing this object in KS3, eg: AES256.
	ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string"`

	// Specifies the algorithm to use to when encrypting the object, eg: AES256.
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// Specifies the customer-provided encryption key for KS3 to use in encrypting data.
	SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"`

	// Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	// Progress callback function
	ProgressFn aws.ProgressFunc `location:"function"`
}

type CopyFileOutput struct {
	Bucket *string

	Key *string

	ETag *string

	ChecksumCRC64ECMA *string
}

type CopyObjectInput struct {
	// The canned ACL to apply to the object.
	ACL *string `location:"header" locationName:"x-amz-acl" type:"string"`

	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	SourceBucket *string `location:"uri" locationName:"sourceBucket" type:"string"`

	SourceKey *string `location:"uri" locationName:"sourceKey" type:"string"`

	// Specifies caching behavior along the request/reply chain.
	CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"`

	// Specifies presentational information for the object.
	ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"`

	// Specifies what content encodings have been applied to the object and thus
	// what decoding mechanisms must be applied to obtain the media-type referenced
	// by the Content-Type header field.
	ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"`

	// The language the content is in.
	ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"`

	// A standard MIME type describing the format of the object data.
	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// The name of the source bucket and key name of the source object, separated
	// by a slash (/). Must be URL-encoded.
	CopySource *string `location:"header" locationName:"x-amz-copy-source" type:"string" required:"true"`

	// Copies the object if its entity tag (ETag) matches the specified tag.
	CopySourceIfMatch *string `location:"header" locationName:"x-amz-copy-source-if-match" type:"string"`

	// Copies the object if it has been modified since the specified time.
	CopySourceIfModifiedSince *time.Time `location:"header" locationName:"x-amz-copy-source-if-modified-since" type:"timestamp" timestampFormat:"rfc822"`

	// Copies the object if its entity tag (ETag) is different from the specified ETag.
	CopySourceIfNoneMatch *string `location:"header" locationName:"x-amz-copy-source-if-none-match" type:"string"`

	// Copies the object if it hasn't been modified since the specified time.
	CopySourceIfUnmodifiedSince *time.Time `location:"header" locationName:"x-amz-copy-source-if-unmodified-since" type:"timestamp" timestampFormat:"rfc822"`

	// Specifies the algorithm to use when decrypting the source object (e.g., AES256).
	CopySourceSSECustomerAlgorithm *string `location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-algorithm" type:"string"`

	// Specifies the customer-provided encryption key for Amazon S3 to use to decrypt
	// the source object. The encryption key provided in this header must be one
	// that was used when the source object was created.
	CopySourceSSECustomerKey *string `location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-key" type:"string"`

	// Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321.
	// Amazon S3 uses this header for a message integrity check to ensure the encryption
	// key was transmitted without error.
	CopySourceSSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-key-MD5" type:"string"`

	// The date and time at which the object is no longer cacheable.
	Expires *time.Time `location:"header" locationName:"Expires" type:"timestamp" timestampFormat:"rfc822"`

	// Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
	GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"`

	// Allows grantee to read the object data and its metadata.
	GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"`

	// Allows grantee to read the object ACL.
	GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"`

	// Allows grantee to write the ACL for the applicable object.
	GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"`

	// A map of metadata to store with the object in S3.
	Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"`

	// Specifies whether the metadata is copied from the source object or replaced
	// with metadata provided in the request.
	MetadataDirective *string `location:"header" locationName:"x-amz-metadata-directive" type:"string"`

	// Confirms that the requester knows that she or he will be charged for the
	// request. Bucket owners need not specify this parameter in their requests.
	// Documentation on downloading objects from requester pays buckets can be found
	// at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
	RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string"`

	// Specifies the algorithm to use to when encrypting the object (e.g., AES256,
	// aws:kms).
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// Specifies the customer-provided encryption key for Amazon S3 to use in encrypting
	// data. This value is used to store the object and then it is discarded; Amazon
	// does not store the encryption key. The key must be appropriate for use with
	// the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm
	// header.
	SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"`

	// Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321.
	// Amazon S3 uses this header for a message integrity check to ensure the encryption
	// key was transmitted without error.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	// Specifies the AWS KMS key ID to use for object encryption. All GET and PUT
	// requests for an object protected by AWS KMS will fail if not made via SSL
	// or using SigV4. Documentation on configuring any of the officially supported
	// AWS SDKs and CLI can be found at http://docs.aws.amazon.com/AmazonS3/latest/dev/UsingAWSSDK.html#specify-signature-version
	SSEKMSKeyID *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"`

	// The Server-side encryption algorithm used when storing this object in S3
	// (e.g., AES256, aws:kms).
	ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string"`

	// The type of storage to use for the object. Defaults to 'STANDARD'.
	StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string"`

	// If the bucket is configured as a website, redirects requests for this object
	// to another object in the same bucket or to an external URL. Amazon S3 stores
	// the value of this header in the object metadata.
	WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"`

	// Specifies the object tag of the object. Multiple tags can be set at the same time, such as: TagA=A&TagB=B.
	// Note: Key and Value need to be URL-encoded first. If an item does not have "=", the Value is considered to be an empty string.
	Tagging *string `location:"header" locationName:"x-amz-tagging" type:"string"`

	// Specifies how to set the object tag of the target object.
	// Default value: COPY
	// Valid values:
	// COPY (default value): Copies the object tag of the source object to the target object.
	// REPLACE: Ignores the object tag of the source object and directly uses the object tag specified in the request.
	TaggingDirective *string `location:"header" locationName:"x-amz-tagging-directive" type:"string"`

	// Specifies whether the object is forbidden to overwrite.
	ForbidOverwrite *bool `location:"header" locationName:"x-amz-forbid-overwrite" type:"boolean"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type CopyObjectOutput struct {
	CopyObjectResult *CopyObjectResult `type:"structure"`

	CopySourceVersionID *string `location:"header" locationName:"x-amz-copy-source-version-id" type:"string"`

	// If the object expiration is configured, the response includes this header.
	Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"`

	// If present, indicates that the requester was successfully charged for the
	// request.
	RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string"`

	// If server-side encryption with a customer-provided encryption key was requested,
	// the response will include this header confirming the encryption algorithm
	// used.
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// If server-side encryption with a customer-provided encryption key was requested,
	// the response will include this header to provide round trip message integrity
	// verification of the customer-provided encryption key.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	// If present, specifies the ID of the AWS Key Management Service (KMS) master
	// encryption key that was used for the object.
	SSEKMSKeyID *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"`

	// The Server-side encryption algorithm used when storing this object in S3
	// (e.g., AES256, aws:kms).
	ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type CopyObjectResult struct {
	ETag *string `type:"string"`

	LastModified *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// CRC64 value of a single part
	ChecksumCRC64ECMA *string `type:"string"`
	// contains filtered or unexported fields
}

type CopyPartResult struct {
	// Entity tag of the object.
	ETag *string `type:"string"`

	// Date and time at which the object was uploaded.
	LastModified *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// CRC64 value of a single part
	ChecksumCRC64ECMA *string `type:"string"`
	// contains filtered or unexported fields
}

type CopyPartTask struct {
	// contains filtered or unexported fields
}

type CreateBucketConfiguration struct {
	// Specifies the region where the bucket will be created. If you don't specify
	// a region, the bucket will be created in US Standard.
	LocationConstraint *string `type:"string"`

	// The bucket data redundancy type.
	// Default value: LRS
	// Valid value: LRS丨ZRS
	// LRS: local redundancy storage
	// ZRS: zone redundancy storage
	DataRedundancyType *string `type:"string"`
	// contains filtered or unexported fields
}

type CreateBucketInput struct {
	// The canned ACL to apply to the bucket.
	ACL *string `location:"header" locationName:"x-amz-acl" type:"string"`

	ProjectId *string `location:"uri" locationName:"ProjectId" type:"string"`

	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	CreateBucketConfiguration *CreateBucketConfiguration `locationName:"CreateBucketConfiguration" type:"structure" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"`

	// Allows grantee the read, write, read ACP, and write ACP permissions on the
	// bucket.
	GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"`

	// Allows grantee to list the objects in the bucket.
	GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"`

	// Allows grantee to read the bucket ACL.
	GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"`

	// Allows grantee to create, overwrite, and delete any object in the bucket.
	GrantWrite *string `location:"header" locationName:"x-amz-grant-write" type:"string"`

	// Allows grantee to write the ACL for the applicable bucket.
	GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	BucketType *string `location:"header" locationName:"x-amz-bucket-type" type:"string"`

	// Specify the bucket visit type.
	BucketVisitType *string `location:"header" locationName:"x-amz-bucket-visit-type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`

	MetadataCreateBucketInput `json:"-" xml:"-"`
}

type CreateBucketOutput struct {
	Location *string `location:"header" locationName:"Location" type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type CreateJobInput struct {
	// 批量处理配置规则的容器。
	CreateJobRequest *CreateJobRequest `locationName:"CreateJobRequest" type:"structure" required:"true"`

	// 设置扩展请求头。如果现有字段不支持设置所需的请求头，您可以通过此字段进行设置。
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// 设置扩展查询参数。如果现有字段不支持设置所需的查询参数，您可以通过此字段进行设置。
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type CreateJobOutput struct {
	// 包含任务ID的容器。
	CreateJobResult *CreateJobResult `locationName:"CreateJobResult" type:"structure"`

	// http响应头。
	Metadata map[string]*string `location:"headers" type:"map"`

	// http响应状态码。
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type CreateJobRequest struct {
	// 任务描述。描述长度范围为0 - 256字节。
	// 仅支持字母、数字、中文、下划线（_）和横线（-）的组合。
	Description *string `locationName:"Description" type:"string"`

	// 待处理的文件信息。
	Manifest *JobManifest `locationName:"Manifest" type:"structure" required:"true"`

	// 选择要执行的具体操作。支持批量解冻、批量修改ACL、批量删除操作。
	// 单个任务中Operation只能设置一种操作类型（批量解冻/批量修改ACL/批量删除）。
	Operation *JobOperation `locationName:"Operation" type:"structure" required:"true"`

	// 任务优先级。取值越大表示任务执行的优先级越高。
	// 取值范围：0-2147483647
	Priority *int64 `locationName:"Priority" type:"integer" required:"true"`

	// 任务完成报告。仅支持导出操作失败列表报告。
	Report *JobReport `locationName:"Report" type:"structure" required:"true"`

	// 每个请求唯一的 token，用于避免前端重复发起同一批处理任务。长度为1 - 64字节，建议使用uuid。
	// 1. 仅支持数字、字母、横线（-）。
	// 2. 同一个UID下的ClientRequestToken必须唯一。
	// 3. 创建任务时设置的ClientRequestToken不能与近48小时内已删除的规则ClientRequestToken重复。
	ClientRequestToken *string `locationName:"ClientRequestToken" type:"string" required:"true"`
}

type CreateJobResult struct {
	// 任务ID。规则创建成功后，KS3会自动返回该参数，每个规则对应唯一的任务ID。
	// JobId的值与请求参数ClientRequestToken值一致。
	JobId *string `locationName:"JobId" type:"string"`
}

type CreateMultipartUploadInput struct {
	// The canned ACL to apply to the object.
	ACL *string `location:"header" locationName:"x-amz-acl" type:"string"`

	// Specifies the object tag of the object. Multiple tags can be set at the same time, such as: TagA=A&TagB=B.
	// Note: Key and Value need to be URL-encoded first. If an item does not have "=", the Value is considered to be an empty string.
	Tagging *string `location:"header" locationName:"x-amz-tagging" type:"string"`

	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Specifies caching behavior along the request/reply chain.
	CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"`

	// Specifies presentational information for the object.
	ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"`

	// Specifies what content encodings have been applied to the object and thus
	// what decoding mechanisms must be applied to obtain the media-type referenced
	// by the Content-Type header field.
	ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"`

	// The language the content is in.
	ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"`

	// A standard MIME type describing the format of the object data.
	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// The date and time at which the object is no longer cacheable.
	Expires *time.Time `location:"header" locationName:"Expires" type:"timestamp" timestampFormat:"rfc822"`

	// Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
	GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"`

	// Allows grantee to read the object data and its metadata.
	GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"`

	// Allows grantee to read the object ACL.
	GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"`

	// Allows grantee to write the ACL for the applicable object.
	GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"`

	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// A map of metadata to store with the object in S3.
	Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"`

	// Confirms that the requester knows that she or he will be charged for the
	// request. Bucket owners need not specify this parameter in their requests.
	// Documentation on downloading objects from requester pays buckets can be found
	// at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
	RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string"`

	// Specifies the algorithm to use to when encrypting the object (e.g., AES256,
	// aws:kms).
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// Specifies the customer-provided encryption key for Amazon S3 to use in encrypting
	// data. This value is used to store the object and then it is discarded; Amazon
	// does not store the encryption key. The key must be appropriate for use with
	// the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm
	// header.
	SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"`

	// Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321.
	// Amazon S3 uses this header for a message integrity check to ensure the encryption
	// key was transmitted without error.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	// Specifies the AWS KMS key ID to use for object encryption. All GET and PUT
	// requests for an object protected by AWS KMS will fail if not made via SSL
	// or using SigV4. Documentation on configuring any of the officially supported
	// AWS SDKs and CLI can be found at http://docs.aws.amazon.com/AmazonS3/latest/dev/UsingAWSSDK.html#specify-signature-version
	SSEKMSKeyID *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"`

	// The Server-side encryption algorithm used when storing this object in S3
	// (e.g., AES256, aws:kms).
	ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string"`

	// The type of storage to use for the object. Defaults to 'STANDARD'.
	StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string"`

	// If the bucket is configured as a website, redirects requests for this object
	// to another object in the same bucket or to an external URL. Amazon S3 stores
	// the value of this header in the object metadata.
	WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"`

	// Specifies whether the object is forbidden to overwrite.
	ForbidOverwrite *bool `location:"header" locationName:"x-amz-forbid-overwrite" type:"boolean"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type CreateMultipartUploadOutput struct {
	// Name of the bucket to which the multipart upload was initiated.
	Bucket *string `locationName:"Bucket" type:"string"`

	// Object key for which the multipart upload was initiated.
	Key *string `type:"string"`

	// If present, indicates that the requester was successfully charged for the
	// request.
	RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string"`

	// If server-side encryption with a customer-provided encryption key was requested,
	// the response will include this header confirming the encryption algorithm
	// used.
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// If server-side encryption with a customer-provided encryption key was requested,
	// the response will include this header to provide round trip message integrity
	// verification of the customer-provided encryption key.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	// If present, specifies the ID of the AWS Key Management Service (KMS) master
	// encryption key that was used for the object.
	SSEKMSKeyID *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"`

	// The Server-side encryption algorithm used when storing this object in S3
	// (e.g., AES256, aws:kms).
	ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string"`

	// ID for the initiated multipart upload.
	UploadID *string `locationName:"UploadId" type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`
	// contains filtered or unexported fields
}

type DataRedundancySwitch struct {
	// The bucket data redundancy type.
	DataRedundancyType *string `locationName:"DataRedundancyType" type:"string"`
	// Time when zone redundancy is enabled.
	SwitchTime *time.Time `locationName:"SwitchTime" type:"timestamp" timestampFormat:"iso8601"`
}

type DecompressPolicyRule struct {
	// The name of the decompression strategy and the unique identifier of the decompression rule configured by the bucket. Value range: [1, 256].
	// Description: The length is 1-256 characters and can only be composed of uppercase or lowercase English letters, numbers, underscores (_), and hyphens (-).
	Id *string `json:"id,omitempty" type:"string" locationName:"id" required:"true"`

	// ZIP online decompression trigger event, currently supports the following operations:
	// "ObjectCreated:*": represents all operations for creating objects, including Put, Post, Copy objects, and merging segmentation tasks;
	// "ObjectCreated:Put": Use the Put method to upload a ZIP package;
	// "ObjectCreated:Post": Use the Post method to upload a ZIP package;
	// "ObjectCreated:Copy": Use the Copy method to copy a ZIP package;
	// "ObjectCreated:CompleteMultipartUpload": Use merge to upload ZIP packages in chunks.
	Events *string `json:"events,omitempty" type:"string" locationName:"events" required:"true"`

	// Match rule prefix (ZIP package that matches the prefix).
	// If no prefix is specified, all ZIP packages uploaded will be matched by default.
	Prefix *string `json:"prefix,omitempty" type:"string" locationName:"prefix"`

	// Match rule suffix.
	// The default is. zip, and currently only supports ZIP package format.
	Suffix []*string `json:"suffix,omitempty" type:"list" locationName:"suffix" required:"true"`

	// The processing method for files with the same name after decompression is not to overwrite them by default
	// The parameter values are as follows:
	// 0 (default value): Do not overwrite skip, keep existing objects in the bucket, skip objects with the same name, do not decompress;
	// 1: Overwrite, preserve the extracted object, and delete any existing objects with the same name in the bucket.
	Overwrite *int64 `json:"overwrite,omitempty" type:"integer" locationName:"overwrite" required:"true"`

	// The address for task callback, URL address.
	Callback *string `json:"callback,omitempty" type:"string" locationName:"callback"`

	// Task callback format, JSON format (required if callback address is set).
	CallbackFormat *string `json:"callback_format,omitempty" type:"string" locationName:"callback_format"`

	// Specify the prefix of the output file in the target bucket after decompression. If it is not empty, it must end with a '/'.
	// If left blank, it will be saved by default in the root path of the storage bucket.
	PathPrefix *string `json:"path_prefix,omitempty" type:"string" locationName:"path_prefix"`

	// Specify whether the compressed file path requires a compressed file name, with the following parameter values:
	// 0 (default): Keep compressed file name
	// 1: Extract directly to the target directory
	PathPrefixReplaced *int64 `json:"path_prefix_replaced,omitempty" type:"integer" locationName:"path_prefix_replaced"`

	// Type of file decompression strategy.
	// Fixed value: decompress.
	PolicyType *string `json:"policy_type,omitempty" type:"string" locationName:"policy_type" required:"true"`
}

type Delete struct {
	Objects []*ObjectIdentifier `locationName:"Object" type:"list" flattened:"true" required:"true"`

	// Element to enable quiet mode for the request. When you add this element,
	// you must set its value to true.
	Quiet *bool `type:"boolean"`
	// contains filtered or unexported fields
}

type DeleteBucketCORSInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DeleteBucketCORSOutput struct {
	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type DeleteBucketDecompressPolicyInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DeleteBucketDecompressPolicyOutput struct {
	Metadata map[string]*string `location:"headers" type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type DeleteBucketEncryptionInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DeleteBucketEncryptionOutput struct {
	// The HTTP headers of the response.
	Metadata map[string]*string `location:"headers" type:"map"`

	// The HTTP status code of the response.
	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type DeleteBucketInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type DeleteBucketInventoryInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	Id *string `location:"querystring" locationName:"id" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DeleteBucketInventoryOutput struct {
	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type DeleteBucketLifecycleInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DeleteBucketLifecycleOutput struct {
	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type DeleteBucketMirrorInput struct {
	Bucket      *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`
	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DeleteBucketMirrorOutput struct {
	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type DeleteBucketNotificationInput struct {
	// 存储桶名称。
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// 设置扩展请求头。如果现有字段不支持设置所需的请求头，您可以通过此字段进行设置。
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// 设置扩展查询参数。如果现有字段不支持设置所需的查询参数，您可以通过此字段进行设置。
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DeleteBucketNotificationOutput struct {
	// http响应头。
	Metadata map[string]*string `location:"headers" type:"map"`

	// http响应状态码。
	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type DeleteBucketOutput struct {
	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type DeleteBucketPolicyInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type DeleteBucketPolicyOutput struct {
	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type DeleteBucketPrefixInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`
	// Prefix of the object.
	Prefix *string `type:"string"  required:"true"`
	// The max number of each list.
	MaxKeys *int64 `type:"integer" required:"true"`
	// Is return the deletion result.
	IsReTurnResults *bool `type:"boolean" required:"true"`
}

type DeleteBucketQosInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DeleteBucketQosOutput struct {
	// The HTTP headers of the response.
	Metadata map[string]*string `location:"headers" type:"map"`

	// The HTTP status code of the response.
	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type DeleteBucketQuotaInput struct {
	// 存储桶名称。
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// 设置扩展请求头。如果现有字段不支持设置所需的请求头，您可以通过此字段进行设置。
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// 设置扩展查询参数。如果现有字段不支持设置所需的查询参数，您可以通过此字段进行设置。
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DeleteBucketQuotaOutput struct {
	// http响应头。
	Metadata map[string]*string `location:"headers" type:"map"`

	// http响应状态码。
	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type DeleteBucketReplicationInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DeleteBucketReplicationOutput struct {
	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type DeleteBucketTaggingInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DeleteBucketTaggingOutput struct {
	// The HTTP headers of the response.
	Metadata map[string]*string `location:"headers"  type:"map"`

	// The HTTP status code of the response.
	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type DeleteBucketWebsiteInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type DeleteBucketWebsiteOutput struct {
	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type DeleteJobInput struct {
	// 需要删除的任务ID。每个任务对应唯一的任务ID，创建批量处理任务（CreateJob）成功后，KS3会返回任务ID。
	JobId *string `location:"querystring" locationName:"jobId" type:"string" required:"true"`

	// 设置扩展请求头。如果现有字段不支持设置所需的请求头，您可以通过此字段进行设置。
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// 设置扩展查询参数。如果现有字段不支持设置所需的查询参数，您可以通过此字段进行设置。
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DeleteJobOutput struct {
	// http响应头。
	Metadata map[string]*string `location:"headers" type:"map"`

	// http响应状态码。
	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type DeleteMarkerEntry struct {
	// Specifies whether the object is (true) or is not (false) the latest version
	// of an object.
	IsLatest *bool `type:"boolean"`

	// The object key.
	Key *string `type:"string"`

	// Date and time the object was last modified.
	LastModified *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	Owner *Owner `type:"structure"`

	// Version ID of an object.
	VersionID *string `locationName:"VersionId" type:"string"`
	// contains filtered or unexported fields
}

type DeleteObjectInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// The concatenation of the authentication device's serial number, a space,
	// and the value that is displayed on your authentication device.
	MFA *string `location:"header" locationName:"x-amz-mfa" type:"string"`

	// Confirms that the requester knows that she or he will be charged for the
	// request. Bucket owners need not specify this parameter in their requests.
	// Documentation on downloading objects from requester pays buckets can be found
	// at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
	RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string"`

	// VersionId used to reference a specific version of the object.
	VersionID *string `location:"querystring" locationName:"versionId" type:"string"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type DeleteObjectOutput struct {
	// Specifies whether the versioned object that was permanently deleted was (true)
	// or was not (false) a delete marker.
	DeleteMarker *bool `location:"header" locationName:"x-amz-delete-marker" type:"boolean"`

	// If present, indicates that the requester was successfully charged for the
	// request.
	RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string"`

	// Returns the version ID of the delete marker created as a result of the DELETE
	// operation.
	VersionID *string `location:"header" locationName:"x-amz-version-id" type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type DeleteObjectTaggingInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type DeleteObjectTaggingOutput struct {
	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type DeleteObjectsInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	Delete *Delete `locationName:"Delete" type:"structure" required:"true"`

	IsReTurnResults *bool `type:"boolean"  required:"true"`

	// The concatenation of the authentication device's serial number, a space,
	// and the value that is displayed on your authentication device.
	MFA *string `location:"header" locationName:"x-amz-mfa" type:"string"`

	// Confirms that the requester knows that she or he will be charged for the
	// request. Bucket owners need not specify this parameter in their requests.
	// Documentation on downloading objects from requester pays buckets can be found
	// at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
	RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type DeleteObjectsOutput struct {
	Deleted []*DeletedObject `type:"list" flattened:"true"`

	Errors []*Error `locationName:"Error" type:"list" flattened:"true"`

	ErrorsCount *int64 `locationName:"ErrorsCount" type:"integer"`

	// If present, indicates that the requester was successfully charged for the
	// request.
	RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type DeleteRequesterQosInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DeleteRequesterQosOutput struct {
	// The HTTP headers of the response.
	Metadata map[string]*string `location:"headers" type:"map"`

	// The HTTP status code of the response.
	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type DeleteVpcAccessBlockInput struct {
	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DeleteVpcAccessBlockOutput struct {
	// The HTTP headers of the response.
	Metadata map[string]*string `location:"headers" type:"map"`

	// The HTTP status code of the response.
	StatusCode *int64 `location:"statusCode" type:"integer"`
}

type DeletedObject struct {
	DeleteMarker *bool `type:"boolean"`

	DeleteMarkerVersionID *string `locationName:"DeleteMarkerVersionId" type:"string"`

	Key *string `type:"string"`

	VersionID *string `locationName:"VersionId" type:"string"`
	// contains filtered or unexported fields
}

type DescribeJobInput struct {
	// 任务ID。个任务对应唯一的任务ID，创建批量处理任务（CreateJob）成功后，KS3会返回任务ID。
	JobId *string `location:"querystring" locationName:"jobId" type:"string" required:"true"`

	// 设置扩展请求头。如果现有字段不支持设置所需的请求头，您可以通过此字段进行设置。
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// 设置扩展查询参数。如果现有字段不支持设置所需的查询参数，您可以通过此字段进行设置。
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type DescribeJobOutput struct {
	// 包含批量处理规则信息的容器。
	DescribeJobResult *DescribeJobResult `locationName:"DescribeJobResult" type:"structure"`

	// http响应头。
	Metadata map[string]*string `location:"headers" type:"map"`

	// http响应状态码。
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type DescribeJobResult struct {
	// 任务ID。规则创建成功后，KS3会自动返回该参数，每个规则对应唯一的任务ID。
	JobId *string `locationName:"JobId" type:"string"`

	// 任务创建时间。
	CreationTime *string `locationName:"CreationTime" type:"timestamp" timestampFormat:"iso8601"`

	// 任务描述。
	Description *string `locationName:"Description" type:"string"`

	// 任务执行的当前状态。合法参数值包括：New、Active、Complete。
	// New：批量处理任务刚被创建，任务正在解析中。
	// Active：批量操作任务进行中。
	// Complete：批量操作任务已完成，处于最终状态。
	Status *string `locationName:"Status" type:"string"`

	// 待处理的文件信息。
	Manifest *JobManifest `locationName:"Manifest" type:"structure"`

	// 具体操作。支持批量解冻、批量修改ACL、批量删除操作。
	Operation *JobOperation `locationName:"Operation" type:"structure"`

	// 任务优先级。取值越大表示任务执行的优先级越高。
	Priority *int64 `locationName:"Priority" type:"integer"`

	// 任务执行状况概述。描述该批量处理任务中所执行的操作总数，成功的操作数量以及失败的操作数量。
	ProgressSummary *JobProgressSummary `locationName:"ProgressSummary" type:"structure"`

	// 任务完成报告。仅支持导出操作失败列表报告。
	Report *JobReport `locationName:"Report" type:"structure"`

	// 任务终止的时间。
	TerminationDate *string `locationName:"TerminationDate" type:"timestamp" timestampFormat:"iso8601"`
}

type Destination struct {
	// Bucket information stored after exporting the inventory results.
	KS3BucketDestination *KS3BucketDestination `locationName:"KS3BucketDestination" type:"structure" required:"true"`
}

type DownloadCheckpoint struct {
	Magic              string
	MD5                string
	CpFilePath         string           // checkpoint file full path
	DownloadFilePath   string           // Local file path
	BucketName         string           // Bucket name
	ObjectKey          string           // Object key
	ObjectSize         int64            // Object size
	ObjectLastModified string           // Object last modified
	PartSize           int64            // Part size
	PartETagList       []*CompletedPart // Completed parts
}

type DownloadFileInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Object key of the object.
	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// The path of the file to be downloaded.
	DownloadFile *string `type:"string" locationName:"DownloadFile" required:"true"`

	// The size of each part.
	PartSize *int64 `type:"integer" locationName:"PartSize"`

	// The number of tasks to download the file.
	TaskNum *int64 `type:"integer" locationName:"TaskNum"`

	// Whether to enable checkpoint.
	EnableCheckpoint *bool `type:"boolean" locationName:"EnableCheckpoint"`

	// The directory to store the checkpoint file.
	CheckpointDir *string `type:"string" locationName:"CheckpointDir"`

	// The checkpoint file path.
	CheckpointFile *string `type:"string" locationName:"CheckpointFile"`

	// 下载的范围，range[0]为开始位置，range[1]为结束位置
	// range[0] 小于 0 时表示从文件头开始下载
	// range[1] 小于 0 时表示下载到文件末尾
	// range[0] 和 range[1] 都小于 0 时表示下载整个文件
	// range[0] 和 range[1] 都大于等于 0 时表示下载指定范围的文件
	// range[0] 大于 range[1] 且 range[1] 非负时表示下载整个文件
	// 例如：
	// range=[0, 99] 表示下载文件的前100个字节
	// range=[100, 199] 表示下载文件的第101个字节至第200个字节
	// range=[100, -1] 表示下载文件的第101个字节至文件末尾
	// range=[-1, 100] 表示下载文件的后100个字节
	// Downloads the specified range bytes of an object.
	Range []int64 `locationName:"Range" type:"list"`

	// Sets the Content-Type header of the response.
	ResponseContentType *string `location:"querystring" locationName:"response-content-type" type:"string"`

	// Sets the Content-Language header of the response.
	ResponseContentLanguage *string `location:"querystring" locationName:"response-content-language" type:"string"`

	// Sets the Expires header of the response.
	ResponseExpires *time.Time `location:"querystring" locationName:"response-expires" type:"timestamp" timestampFormat:"iso8601"`

	// Sets the Cache-Control header of the response.
	ResponseCacheControl *string `location:"querystring" locationName:"response-cache-control" type:"string"`

	// Sets the Content-Disposition header of the response
	ResponseContentDisposition *string `location:"querystring" locationName:"response-content-disposition" type:"string"`

	// Sets the Content-Encoding header of the response.
	ResponseContentEncoding *string `location:"querystring" locationName:"response-content-encoding" type:"string"`

	// Return the object only if it has been modified since the specified time,
	// otherwise return a 304 (not modified).
	IfModifiedSince *time.Time `location:"header" locationName:"If-Modified-Since" type:"timestamp" timestampFormat:"rfc822"`

	// Return the object only if it has not been modified since the specified time,
	// otherwise return a 412 (precondition failed).
	IfUnmodifiedSince *time.Time `location:"header" locationName:"If-Unmodified-Since" type:"timestamp" timestampFormat:"rfc822"`

	// Return the object only if its entity tag (ETag) is the same as the one specified,
	// otherwise return a 412 (precondition failed).
	IfMatch *string `location:"header" locationName:"If-Match" type:"string"`

	// Return the object only if its entity tag (ETag) is different from the one
	// specified, otherwise return a 304 (not modified).
	IfNoneMatch *string `location:"header" locationName:"If-None-Match" type:"string"`

	// Specify the encoding type of the client.
	// If you want to compress and transmit the returned content using gzip,
	// you need to add a request header: Accept-Encoding:gzip。
	// KS3 will determine whether to return gzip compressed data based on the
	// Content-Type and Object size (not less than 1 KB) of the object.
	// Value: gzip、br、deflate
	AcceptEncoding *string `location:"header" locationName:"Accept-Encoding" type:"string"`

	// Specifies the algorithm to use to when encrypting the object, eg: AES256.
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// Specifies the customer-provided encryption key for KS3 to use in encrypting data.
	SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"`

	// Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	// Progress callback function
	ProgressFn aws.ProgressFunc `location:"function"`
}

type DownloadFileOutput struct {
	Bucket *string

	Key *string

	ETag *string

	ChecksumCRC64ECMA *string

	ObjectMeta map[string]*string
}

type DownloadPartTask struct {
	// contains filtered or unexported fields
}

type Downloader struct {
	CompletedSize int64
	// contains filtered or unexported fields
}

type Error struct {
	Code *string `type:"string"`

	Key *string `type:"string"`

	Message *string `type:"string"`

	VersionID *string `locationName:"VersionId" type:"string"`
	// contains filtered or unexported fields
}

type ErrorDocument struct {
	// The object key name to use when a 4XX class error occurs.
	Key *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type FetchObjectInput struct {
	// The canned ACL to apply to the object.
	ACL *string `location:"header" locationName:"x-kss-acl" type:"string"`

	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Specifies caching behavior along the request/reply chain.
	CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"`

	// Specifies presentational information for the object.
	ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"`

	// Specifies what content encodings have been applied to the object and thus
	// what decoding mechanisms must be applied to obtain the media-type referenced
	// by the Content-Type header field.
	ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"`

	// The language the content is in.
	ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"`

	// A standard MIME type describing the format of the object data.
	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// The name of the source bucket and key name of the source object, separated
	// by a slash (/). Must be URL-encoded.
	SourceUrl *string `location:"header" locationName:"x-kss-sourceurl" type:"string" required:"true"`

	CallbackUrl *string `location:"header" locationName:"x-kss-callbackurl" type:"string"`

	// The date and time at which the object is no longer cacheable.
	Expires *time.Time `location:"header" locationName:"Expires" type:"timestamp" timestampFormat:"rfc822"`

	// Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
	GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"`

	// Allows grantee to read the object data and its metadata.
	GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"`

	// Allows grantee to read the object ACL.
	GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"`

	// Allows grantee to write the ACL for the applicable object.
	GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"`

	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// A map of metadata to store with the object in S3.
	Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"`

	// Specifies whether the metadata is copied from the source object or replaced
	// with metadata provided in the request.
	MetadataDirective *string `location:"header" locationName:"x-amz-metadata-directive" type:"string"`

	// Confirms that the requester knows that she or he will be charged for the
	// request. Bucket owners need not specify this parameter in their requests.
	// Documentation on downloading objects from requester pays buckets can be found
	// at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
	RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string"`

	// Specifies the algorithm to use to when encrypting the object (e.g., AES256,
	// aws:kms).
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// Specifies the customer-provided encryption key for Amazon S3 to use in encrypting
	// data. This value is used to store the object and then it is discarded; Amazon
	// does not store the encryption key. The key must be appropriate for use with
	// the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm
	// header.
	SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"`

	// Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321.
	// Amazon S3 uses this header for a message integrity check to ensure the encryption
	// key was transmitted without error.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	// Specifies the AWS KMS key ID to use for object encryption. All GET and PUT
	// requests for an object protected by AWS KMS will fail if not made via SSL
	// or using SigV4. Documentation on configuring any of the officially supported
	// AWS SDKs and CLI can be found at http://docs.aws.amazon.com/AmazonS3/latest/dev/UsingAWSSDK.html#specify-signature-version
	SSEKMSKeyID *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"`

	// The Server-side encryption algorithm used when storing this object in S3
	// (e.g., AES256, aws:kms).
	ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string"`

	// The type of storage to use for the object. Defaults to 'STANDARD'.
	StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string"`

	// If the bucket is configured as a website, redirects requests for this object
	// to another object in the same bucket or to an external URL. Amazon S3 stores
	// the value of this header in the object metadata.
	WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"`

	// Specifies the object tag of the object. Multiple tags can be set at the same time, such as: TagA=A&TagB=B.
	// Note: Key and Value need to be URL-encoded first. If an item does not have "=", the Value is considered to be an empty string.
	Tagging *string `location:"header" locationName:"x-amz-tagging" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type FetchObjectOutput struct {

	// If the object expiration is configured, the response includes this header.
	Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"`

	// If present, indicates that the requester was successfully charged for the
	// request.
	RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string"`

	// If server-side encryption with a customer-provided encryption key was requested,
	// the response will include this header confirming the encryption algorithm
	// used.
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// If server-side encryption with a customer-provided encryption key was requested,
	// the response will include this header to provide round trip message integrity
	// verification of the customer-provided encryption key.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	// If present, specifies the ID of the AWS Key Management Service (KMS) master
	// encryption key that was used for the object.
	SSEKMSKeyID *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"`

	// The Server-side encryption algorithm used when storing this object in S3
	// (e.g., AES256, aws:kms).
	ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type Fetcher struct {
	// contains filtered or unexported fields
}

type FilePartFetcher interface {
	Fetch(objectRange []int64) (io.ReadSeeker, error)
}

type Func func(attempt int) (retry bool, err error)

type GeneratePresignedUrlInput struct {

	// The canned ACL to apply to the object.
	ACL *string `location:"header" locationName:"x-amz-acl" type:"string"`

	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// A standard MIME type describing the format of the object data.
	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	ContentMd5 *string `location:"header" locationName:"Content-Md5" type:"string"`

	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// A map of metadata to store with the object in S3.
	Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"`

	TrafficLimit *int64 `location:"querystring" locationName:"x-kss-traffic-limit"  type:"integer"`

	HTTPMethod HTTPMethod `locationName:"HTTPMethod" type:"string" required:"true"`

	// The date and time at which the object is no longer cacheable.
	Expires int64 `locationName:"Expires" type:"integer" required:"true"`

	// Sets the Cache-Control header of the response.
	ResponseCacheControl *string `location:"querystring" locationName:"response-cache-control" type:"string"`

	// Sets the Content-Disposition header of the response
	ResponseContentDisposition *string `location:"querystring" locationName:"response-content-disposition" type:"string"`

	// Sets the Content-Encoding header of the response.
	ResponseContentEncoding *string `location:"querystring" locationName:"response-content-encoding" type:"string"`

	// Sets the Content-Language header of the response.
	ResponseContentLanguage *string `location:"querystring" locationName:"response-content-language" type:"string"`

	// Sets the Content-Type header of the response.
	ResponseContentType *string `location:"querystring" locationName:"response-content-type" type:"string"`

	// Sets the Expires header of the response.
	ResponseExpires *time.Time `location:"querystring" locationName:"response-expires" type:"timestamp" timestampFormat:"iso8601"`

	// Deprecated, use ExtendHeaders instead.
	Headers map[string]*string `location:"extendHeaders" type:"map"`

	// Deprecated, use ExtendQueryParams instead.
	Parameters map[string]*string `location:"extendQueryParams" type:"map"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type GeneratePresignedUrlOutput struct {
	// contains filtered or unexported fields
}

type GenerateShareUrlInput struct {
	// 分享的桶名称
	Bucket *string `location:"uri" locationName:"bucket" type:"string" required:"true"`

	// 分享的前缀，如果不指定，则分享整个桶下的对象
	Prefix *string `location:"querystring" locationName:"prefix" type:"string"`

	// 分享链接的过期时间，单位为秒，默认值为900秒（15分钟）
	Expires *int64 `locationName:"expires" type:"integer"`

	// 提取码，格式为6位字母和数字组合，如果设置了提取码，则生成带提取码的分享链接
	AccessCode *string `locationName:"accessCode" type:"string"`

	// 分享策略
	Policy *string `locationName:"policy" type:"string"`

	// 扩展的查询参数
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketACLInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type GetBucketACLOutput struct {
	// A list of grants.
	Grants []*Grant `locationName:"AccessControlList" locationNameList:"Grant" type:"list"`

	Owner *Owner `type:"structure"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketAccessMonitorInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketAccessMonitorOutput struct {
	// Bucket access monitor configuration.
	AccessMonitorConfiguration *AccessMonitorConfiguration `locationName:"AccessMonitorConfiguration" type:"structure"`

	// The HTTP headers of the response.
	Metadata map[string]*string `location:"headers" type:"map"`

	// The HTTP status code of the response.
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketCORSInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketCORSOutput struct {
	CORSConfiguration *CORSConfiguration `locationName:"CORSConfiguration" type:"structure"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketDataRedundancySwitchInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketDataRedundancySwitchOutput struct {
	// The bucket data redundancy switch configuration.
	DataRedundancySwitch *DataRedundancySwitch `locationName:"DataRedundancySwitch" type:"structure"`
	// The HTTP headers of the response.
	Metadata map[string]*string `location:"headers" type:"map"`
	// The HTTP status code of the response.
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketDecompressPolicyInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketDecompressPolicyOutput struct {
	BucketDecompressPolicy *BucketDecompressPolicy `locationName:"BucketDecompressPolicy" type:"structure"`

	Metadata map[string]*string `location:"headers" type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketEncryptionInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketEncryptionOutput struct {
	// Bucket encryption configuration container.
	ServerSideEncryptionConfiguration *ServerSideEncryptionConfiguration `locationName:"ServerSideEncryptionConfiguration" type:"structure"`

	// The HTTP headers of the response.
	Metadata map[string]*string `location:"headers" type:"map"`

	// The HTTP status code of the response.
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketInventoryInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	Id *string `location:"querystring" locationName:"id" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketInventoryOutput struct {
	InventoryConfiguration *InventoryConfiguration `locationName:"Inventory" type:"structure"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketLifecycleInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketLifecycleOutput struct {
	Rules []*LifecycleRule `locationName:"Rule" type:"list" flattened:"true"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketLocationInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type GetBucketLocationOutput struct {
	LocationConstraint *string `type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketLoggingInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type GetBucketLoggingOutput struct {
	LoggingEnabled *LoggingEnabled `type:"structure"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketMirrorInput struct {
	Bucket      *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`
	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketMirrorOutput struct {
	BucketMirror *BucketMirror `locationName:"BucketMirror" type:"structure"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketNotificationInput struct {
	// 存储桶名称。
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// 设置扩展请求头。如果现有字段不支持设置所需的请求头，您可以通过此字段进行设置。
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// 设置扩展查询参数。如果现有字段不支持设置所需的查询参数，您可以通过此字段进行设置。
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketNotificationOutput struct {
	// 存储桶事件通知规则的容器。
	BucketNotification *BucketNotification `locationName:"Notification" type:"structure"`

	// http响应头。
	Metadata map[string]*string `location:"headers" type:"map"`

	// http响应状态码。
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketPolicyInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type GetBucketPolicyOutput struct {
	// The bucket policy as a JSON document.
	Policy *string `type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketQosInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketQosOutput struct {
	// Bucket flow control configuration container.
	BucketQosConfiguration *BucketQosConfiguration `locationName:"BucketQosConfiguration" type:"structure"`

	// The HTTP headers of the response.
	Metadata map[string]*string `location:"headers" type:"map"`

	// The HTTP status code of the response.
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketQuotaInput struct {
	// 存储桶名称。
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// 设置扩展请求头。如果现有字段不支持设置所需的请求头，您可以通过此字段进行设置。
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// 设置扩展查询参数。如果现有字段不支持设置所需的查询参数，您可以通过此字段进行设置。
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketQuotaOutput struct {
	// 存储桶配额规则的容器。
	BucketQuota *BucketQuota `locationName:"Quota" type:"structure"`

	// http响应头。
	Metadata map[string]*string `location:"headers" type:"map"`

	// http响应状态码。
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketReplicationInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketReplicationOutput struct {
	ReplicationConfiguration *ReplicationConfiguration `locationName:"Replication" type:"structure"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketRequestPaymentInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type GetBucketRequestPaymentOutput struct {
	// Specifies who pays for the download and request fees.
	Payer *string `type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketRetentionInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketRetentionOutput struct {
	RetentionConfiguration *BucketRetentionConfiguration `locationName:"RetentionConfiguration" type:"structure"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketTaggingInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketTaggingOutput struct {
	// Bucket tagging configuration container.
	Tagging *Tagging `locationName:"Tagging" type:"structure"`

	// The HTTP headers of the response.
	Metadata map[string]*string `location:"headers"  type:"map"`

	// The HTTP status code of the response.
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketTransferAccelerationInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetBucketTransferAccelerationOutput struct {
	// Bucket transfer acceleration configuration container.
	TransferAccelerationConfiguration *TransferAccelerationConfiguration `locationName:"TransferAccelerationConfiguration" type:"structure"`

	// The HTTP headers of the response.
	Metadata map[string]*string `location:"headers" type:"map"`

	// The HTTP status code of the response.
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketVersioningInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type GetBucketVersioningOutput struct {
	// Specifies whether MFA delete is enabled in the bucket versioning configuration.
	// This element is only returned if the bucket has been configured with MFA
	// delete. If the bucket has never been so configured, this element is not returned.
	MFADelete *string `locationName:"MfaDelete" type:"string"`

	// The versioning state of the bucket.
	Status *string `type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetBucketWebsiteInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type GetBucketWebsiteOutput struct {
	ErrorDocument *ErrorDocument `type:"structure"`

	IndexDocument *IndexDocument `type:"structure"`

	RedirectAllRequestsTo *RedirectAllRequestsTo `type:"structure"`

	RoutingRules []*RoutingRule `locationNameList:"RoutingRule" type:"list"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetObjectACLInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// Confirms that the requester knows that she or he will be charged for the
	// request. Bucket owners need not specify this parameter in their requests.
	// Documentation on downloading objects from requester pays buckets can be found
	// at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
	RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string"`

	// VersionId used to reference a specific version of the object.
	VersionID *string `location:"querystring" locationName:"versionId" type:"string"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type GetObjectACLOutput struct {
	// A list of grants.
	Grants []*Grant `locationName:"AccessControlList" locationNameList:"Grant" type:"list"`

	Owner *Owner `type:"structure"`

	// If present, indicates that the requester was successfully charged for the
	// request.
	RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetObjectInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Return the object only if its entity tag (ETag) is the same as the one specified,
	// otherwise return a 412 (precondition failed).
	IfMatch *string `location:"header" locationName:"If-Match" type:"string"`

	// Return the object only if it has been modified since the specified time,
	// otherwise return a 304 (not modified).
	IfModifiedSince *time.Time `location:"header" locationName:"If-Modified-Since" type:"timestamp" timestampFormat:"rfc822"`

	// Return the object only if its entity tag (ETag) is different from the one
	// specified, otherwise return a 304 (not modified).
	IfNoneMatch *string `location:"header" locationName:"If-None-Match" type:"string"`

	// Return the object only if it has not been modified since the specified time,
	// otherwise return a 412 (precondition failed).
	IfUnmodifiedSince *time.Time `location:"header" locationName:"If-Unmodified-Since" type:"timestamp" timestampFormat:"rfc822"`

	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// Downloads the specified range bytes of an object. For more information about
	// the HTTP Range header, go to http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.35.
	Range *string `location:"header" locationName:"Range" type:"string"`

	// Confirms that the requester knows that she or he will be charged for the
	// request. Bucket owners need not specify this parameter in their requests.
	// Documentation on downloading objects from requester pays buckets can be found
	// at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
	RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string"`

	// Sets the Cache-Control header of the response.
	ResponseCacheControl *string `location:"querystring" locationName:"response-cache-control" type:"string"`

	// Sets the Content-Disposition header of the response
	ResponseContentDisposition *string `location:"querystring" locationName:"response-content-disposition" type:"string"`

	// Sets the Content-Encoding header of the response.
	ResponseContentEncoding *string `location:"querystring" locationName:"response-content-encoding" type:"string"`

	// Sets the Content-Language header of the response.
	ResponseContentLanguage *string `location:"querystring" locationName:"response-content-language" type:"string"`

	// Sets the Content-Type header of the response.
	ResponseContentType *string `location:"querystring" locationName:"response-content-type" type:"string"`

	// Sets the Expires header of the response.
	ResponseExpires *time.Time `location:"querystring" locationName:"response-expires" type:"timestamp" timestampFormat:"iso8601"`

	// Specify the encoding type of the client.
	// If you want to compress and transmit the returned content using gzip,
	// you need to add a request header: Accept-Encoding:gzip。
	// KS3 will determine whether to return gzip compressed data based on the
	// Content-Type and Object size (not less than 1 KB) of the object.
	// Value: gzip、br、deflate
	AcceptEncoding *string `location:"header" locationName:"Accept-Encoding" type:"string"`

	// Specifies the algorithm to use to when encrypting the object (e.g., AES256,
	// aws:kms).
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// Specifies the customer-provided encryption key for Amazon S3 to use in encrypting
	// data. This value is used to store the object and then it is discarded; Amazon
	// does not store the encryption key. The key must be appropriate for use with
	// the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm
	// header.
	SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"`

	// Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321.
	// Amazon S3 uses this header for a message integrity check to ensure the encryption
	// key was transmitted without error.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	// VersionId used to reference a specific version of the object.
	VersionID *string `location:"querystring" locationName:"versionId" type:"string"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	TrafficLimit *int64 `location:"header" locationName:"x-kss-traffic-limit" type:"string"`

	// Progress callback function
	ProgressFn aws.ProgressFunc `location:"function"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type GetObjectMigrationInput struct {
	// 存储桶名称。
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// 对象的Key。
	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// 设置扩展请求头。如果现有字段不支持设置所需的请求头，您可以通过此字段进行设置。
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// 设置扩展查询参数。如果现有字段不支持设置所需的查询参数，您可以通过此字段进行设置。
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetObjectMigrationOutput struct {
	// 存放单个迁移任务参数的容器。
	MigrationConfiguration *MigrationConfiguration `locationName:"Migration" type:"structure"`

	// http响应头。
	Metadata map[string]*string `location:"headers" type:"map"`

	// http响应状态码。
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetObjectOutput struct {
	AcceptRanges *string `location:"header" locationName:"accept-ranges" type:"string"`

	// Object data.
	Body io.ReadCloser `type:"blob"`

	// Specifies caching behavior along the request/reply chain.
	CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"`

	// Specifies presentational information for the object.
	ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"`

	// Specifies what content encodings have been applied to the object and thus
	// what decoding mechanisms must be applied to obtain the media-type referenced
	// by the Content-Type header field.
	ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"`

	// The language the content is in.
	ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"`

	// Size of the body in bytes.
	ContentLength *int64 `location:"header" locationName:"Content-Length" type:"integer"`

	// The portion of the object returned in the response.
	ContentRange *string `location:"header" locationName:"Content-Range" type:"string"`

	// A standard MIME type describing the format of the object data.
	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Specifies whether the object retrieved was (true) or was not (false) a Delete
	// Marker. If false, this response header does not appear in the response.
	DeleteMarker *bool `location:"header" locationName:"x-amz-delete-marker" type:"boolean"`

	// An ETag is an opaque identifier assigned by a web server to a specific version
	// of a resource found at a URL
	ETag *string `location:"header" locationName:"ETag" type:"string"`

	// If the object expiration is configured (see PUT Bucket lifecycle), the response
	// includes this header. It includes the expiry-date and rule-id key value pairs
	// providing object expiration information. The value of the rule-id is URL
	// encoded.
	Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"`

	// The date and time at which the object is no longer cacheable.
	Expires *time.Time `location:"header" locationName:"Expires" type:"timestamp" timestampFormat:"rfc822"`

	// Last modified date of the object
	LastModified *time.Time `location:"header" locationName:"Last-Modified" type:"timestamp" timestampFormat:"rfc822"`

	// This is set to the number of metadata entries not returned in x-amz-meta
	// headers. This can happen if you create metadata using an API like SOAP that
	// supports more flexible metadata than the REST API. For example, using SOAP,
	// you can create metadata whose values are not legal HTTP headers.
	MissingMeta *int64 `location:"header" locationName:"x-amz-missing-meta" type:"integer"`

	ReplicationStatus *string `location:"header" locationName:"x-amz-replication-status" type:"string"`

	// If present, indicates that the requester was successfully charged for the
	// request.
	RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string"`

	// Provides information about object restoration operation and expiration time
	// of the restored object copy.
	Restore *string `location:"header" locationName:"x-amz-restore" type:"string"`

	// If server-side encryption with a customer-provided encryption key was requested,
	// the response will include this header confirming the encryption algorithm
	// used.
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// If server-side encryption with a customer-provided encryption key was requested,
	// the response will include this header to provide round trip message integrity
	// verification of the customer-provided encryption key.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	// If present, specifies the ID of the AWS Key Management Service (KMS) master
	// encryption key that was used for the object.
	SSEKMSKeyID *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"`

	// The Server-side encryption algorithm used when storing this object in S3
	// (e.g., AES256, aws:kms).
	ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string"`

	// Version of the object.
	VersionID *string `location:"header" locationName:"x-amz-version-id" type:"string"`

	// If the bucket is configured as a website, redirects requests for this object
	// to another object in the same bucket or to an external URL. Amazon S3 stores
	// the value of this header in the object metadata.
	WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetObjectTaggingInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type GetObjectTaggingOutput struct {
	Tagging *Tagging `locationName:"Tagging" type:"structure"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetObjectTorrentInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// Confirms that the requester knows that she or he will be charged for the
	// request. Bucket owners need not specify this parameter in their requests.
	// Documentation on downloading objects from requester pays buckets can be found
	// at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
	RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type GetObjectTorrentOutput struct {
	Body io.ReadCloser `type:"blob"`

	// If present, indicates that the requester was successfully charged for the
	// request.
	RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetRequesterQosInput struct {
	// The name of the bucket.
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetRequesterQosOutput struct {
	// Requester flow control configuration container.
	RequesterQosConfiguration *RequesterQosConfiguration `locationName:"RequesterQosConfiguration" type:"structure"`

	// The HTTP headers of the response.
	Metadata map[string]*string `location:"headers" type:"map"`

	// The HTTP status code of the response.
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type GetVpcAccessBlockInput struct {
	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type GetVpcAccessBlockOutput struct {
	// Vpc access block configuration container.
	VpcAccessBlockConfiguration *VpcAccessBlockConfiguration `locationName:"VpcAccessBlockConfiguration" type:"structure"`

	// The HTTP headers of the response.
	Metadata map[string]*string `location:"headers" type:"map"`

	// The HTTP status code of the response.
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type Grant struct {
	Grantee *Grantee `type:"structure"`

	// Specifies the permission given to the grantee.
	Permission *string `type:"string"`
	// contains filtered or unexported fields
}

type Grantee struct {
	// Screen name of the grantee.
	DisplayName *string `type:"string"`

	// Email address of the grantee.
	EmailAddress *string `type:"string"`

	// The canonical user ID of the grantee.
	ID *string `type:"string"`

	// Type of grantee
	Type *string `locationName:"xsi:type" type:"string" xmlAttribute:"true" required:"true"`

	// URI of the grantee group.
	URI *string `type:"string"`
	// contains filtered or unexported fields
}

type HTTPMethod string

type HeadBucketInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type HeadBucketOutput struct {
	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type HeadObjectInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Return the object only if its entity tag (ETag) is the same as the one specified,
	// otherwise return a 412 (precondition failed).
	IfMatch *string `location:"header" locationName:"If-Match" type:"string"`

	// Return the object only if it has been modified since the specified time,
	// otherwise return a 304 (not modified).
	IfModifiedSince *time.Time `location:"header" locationName:"If-Modified-Since" type:"timestamp" timestampFormat:"rfc822"`

	// Return the object only if its entity tag (ETag) is different from the one
	// specified, otherwise return a 304 (not modified).
	IfNoneMatch *string `location:"header" locationName:"If-None-Match" type:"string"`

	// Return the object only if it has not been modified since the specified time,
	// otherwise return a 412 (precondition failed).
	IfUnmodifiedSince *time.Time `location:"header" locationName:"If-Unmodified-Since" type:"timestamp" timestampFormat:"rfc822"`

	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// Downloads the specified range bytes of an object. For more information about
	// the HTTP Range header, go to http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.35.
	Range *string `location:"header" locationName:"Range" type:"string"`

	// Confirms that the requester knows that she or he will be charged for the
	// request. Bucket owners need not specify this parameter in their requests.
	// Documentation on downloading objects from requester pays buckets can be found
	// at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
	RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string"`

	// Specifies the algorithm to use to when encrypting the object (e.g., AES256,
	// aws:kms).
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// Specifies the customer-provided encryption key for Amazon S3 to use in encrypting
	// data. This value is used to store the object and then it is discarded; Amazon
	// does not store the encryption key. The key must be appropriate for use with
	// the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm
	// header.
	SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"`

	// Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321.
	// Amazon S3 uses this header for a message integrity check to ensure the encryption
	// key was transmitted without error.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	// VersionId used to reference a specific version of the object.
	VersionID *string `location:"querystring" locationName:"versionId" type:"string"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type HeadObjectOutput struct {
	AcceptRanges *string `location:"header" locationName:"accept-ranges" type:"string"`

	// Specifies caching behavior along the request/reply chain.
	CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"`

	// Specifies presentational information for the object.
	ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"`

	// Specifies what content encodings have been applied to the object and thus
	// what decoding mechanisms must be applied to obtain the media-type referenced
	// by the Content-Type header field.
	ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"`

	// The language the content is in.
	ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"`

	// Size of the body in bytes.
	ContentLength *int64 `location:"header" locationName:"Content-Length" type:"integer"`

	// A standard MIME type describing the format of the object data.
	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Specifies whether the object retrieved was (true) or was not (false) a Delete
	// Marker. If false, this response header does not appear in the response.
	DeleteMarker *bool `location:"header" locationName:"x-amz-delete-marker" type:"boolean"`

	// An ETag is an opaque identifier assigned by a web server to a specific version
	// of a resource found at a URL
	ETag *string `location:"header" locationName:"ETag" type:"string"`

	// If the object expiration is configured (see PUT Bucket lifecycle), the response
	// includes this header. It includes the expiry-date and rule-id key value pairs
	// providing object expiration information. The value of the rule-id is URL
	// encoded.
	Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"`

	// The date and time at which the object is no longer cacheable.
	Expires *time.Time `location:"header" locationName:"Expires" type:"timestamp" timestampFormat:"rfc822"`

	// Last modified date of the object
	LastModified *time.Time `location:"header" locationName:"Last-Modified" type:"timestamp" timestampFormat:"rfc822"`

	// This is set to the number of metadata entries not returned in x-amz-meta
	// headers. This can happen if you create metadata using an API like SOAP that
	// supports more flexible metadata than the REST API. For example, using SOAP,
	// you can create metadata whose values are not legal HTTP headers.
	MissingMeta *int64 `location:"header" locationName:"x-amz-missing-meta" type:"integer"`

	ReplicationStatus *string `location:"header" locationName:"x-amz-replication-status" type:"string"`

	// If present, indicates that the requester was successfully charged for the
	// request.
	RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string"`

	// Provides information about object restoration operation and expiration time
	// of the restored object copy.
	Restore *string `location:"header" locationName:"x-amz-restore" type:"string"`

	// If server-side encryption with a customer-provided encryption key was requested,
	// the response will include this header confirming the encryption algorithm
	// used.
	SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"`

	// If server-side encryption with a customer-provided encryption key was requested,
	// the response will include this header to provide round trip message integrity
	// verification of the customer-provided encryption key.
	SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"`

	// If present, specifies the ID of the AWS Key Management Service (KMS) master
	// encryption key that was used for the object.
	SSEKMSKeyID *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"`

	// The Server-side encryption algorithm used when storing this object in S3
	// (e.g., AES256, aws:kms).
	ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string"`

	// Version of the object.
	VersionID *string `location:"header" locationName:"x-amz-version-id" type:"string"`

	// If the bucket is configured as a website, redirects requests for this object
	// to another object in the same bucket or to an external URL. Amazon S3 stores
	// the value of this header in the object metadata.
	WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type HeaderSetting struct {
	SetHeaders    []*SetHeaders    `json:"set_headers,omitempty" locationName:"set_headers"`
	RemoveHeaders []*RemoveHeaders `json:"remove_headers,omitempty" locationName:"remove_headers"`
	PassAll       *bool            `json:"pass_all,omitempty" locationName:"pass_all"`
	PassHeaders   []*PassHeaders   `json:"pass_headers,omitempty" locationName:"pass_headers"`
}

type IndexDocument struct {
	// A suffix that is appended to a request that is for a directory on the website
	// endpoint (e.g. if the suffix is index.html and you make a request to samplebucket/images/
	// the data that is returned will be for the object with the key name images/index.html)
	// The suffix must not be empty and must not include a slash character.
	Suffix *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type Initiator struct {
	// Name of the Principal.
	DisplayName *string `type:"string"`

	// If the principal is an AWS account, it provides the Canonical User ID. If
	// the principal is an IAM User, it provides a user ARN value.
	ID *string `type:"string"`
	// contains filtered or unexported fields
}

type InventoryConfiguration struct {
	// The list name specified by the user is unique within a single bucket.
	Id *string `locationName:"Id" type:"string" required:"true"`

	// Is the inventory function enabled.
	IsEnabled *bool `locationName:"IsEnabled" type:"boolean" required:"true"`

	// Specify scanning prefix information.
	Filter *InventoryFilter `locationName:"Filter" type:"structure"`

	// Storage inventory results.
	Destination *Destination `locationName:"Destination" type:"structure" required:"true"`

	// Container for storing inventory export cycle information.
	Schedule *Schedule `locationName:"Schedule" type:"structure" required:"true"`

	// Set the configuration items included in the inventory results.
	OptionalFields *OptionalFields `locationName:"OptionalFields" type:"structure" required:"true"`
}

type InventoryFilter struct {
	// The storage path prefix of the inventory file.
	Prefix *string `locationName:"Prefix" type:"string" required:"true"`

	// The starting timestamp of the last modification time of the filtered file, in seconds.
	LastModifyBeginTimeStamp *string `locationName:"LastModifyBeginTimeStamp" type:"string"`

	// End timestamp of the last modification time of the filtered file, in seconds.
	LastModifyEndTimeStamp *string `locationName:"LastModifyEndTimeStamp" type:"string"`
}

type JobAccessControlList struct {
	// 包含被授权者和其ACL信息。
	// 单条规则最多支持设置100条Grant。
	Grants []*JobGrant `locationName:"Grant" type:"list" flattened:"true"`
}

type JobGrant struct {
	// 被授权者的账号（UID）信息。
	// 1. 单个Grantee参数仅支持传入一个账号信息。
	// 2. 仅支持针对UID授予ACL权限。
	Grantee *string `locationName:"Grantee" type:"string"`

	// 指明授予被授权者的权限信息。
	// 取值：FULL_CONTROL、READ
	// 1. FULL_CONTROL表示被授权者具有对文件的读写权限。
	// 2. READ表示被授权者具有对文件的只读权限。
	Permission *string `locationName:"Permission" type:"string"`
}

type JobList struct {
	// 包含KS3返回的单个批量处理任务信息。
	Members []*JobMember `locationName:"Member" type:"list" flattened:"true"`
}

type JobManifest struct {
	// 待处理的文件位置信息。
	Location *ManifestLocation `locationName:"Location" type:"structure"`

	// 描述待处理文件列表的格式信息。
	Spec *ManifestSpec `locationName:"Spec" type:"structure"`
}

type JobMember struct {
	// 任务ID。规则创建成功后，KS3会自动返回该参数，每个规则对应唯一的任务ID。
	JobId *string `locationName:"JobId" type:"string"`

	// 任务描述。
	Description *string `locationName:"Description" type:"string"`

	// 具体操作。支持批量解冻、批量修改ACL、批量删除操作。
	Operation *string `locationName:"Operation" type:"string"`

	// 任务创建时间。
	CreationTime *string `locationName:"CreationTime" type:"timestamp" timestampFormat:"iso8601"`

	// 任务优先级。取值越大表示任务执行的优先级越高。
	Priority *int64 `locationName:"Priority" type:"integer"`

	// 任务执行状况概述。描述该批量处理任务中所执行的操作总数，成功的操作数量以及失败的操作数量。
	ProgressSummary *JobProgressSummary `locationName:"ProgressSummary" type:"structure"`

	// 任务执行的当前状态。合法参数值包括：New、Active、Complete。
	// New：批量处理任务刚被创建，任务正在解析中。
	// Active：批量操作任务进行中。
	// Complete：批量操作任务已完成，处于最终状态。
	Status *string `locationName:"Status" type:"string"`

	// 任务终止的时间。
	TerminationDate *string `locationName:"TerminationDate" type:"timestamp" timestampFormat:"iso8601"`
}

type JobOperation struct {
	// 批量设置ACL的具体参数。
	KS3PutObjectAcl *KS3PutObjectAcl `locationName:"KS3PutObjectAcl" type:"structure"`

	// 对归档类型文件批量执行解冻操作的具体参数。
	KS3RestoreObject *KS3RestoreObject `locationName:"KS3RestoreObject" type:"structure"`

	// 对文件批量执行删除操作的具体参数。对文件批量执行删除操作时，该参数取值设置为空即可。
	KS3DeleteObject *KS3DeleteObject `locationName:"KS3DeleteObject" useEmpty:"true" type:"structure"`
}

type JobProgressSummary struct {
	// 当前失败的操作数。
	NumberOfTasksFailed *int64 `locationName:"NumberOfTasksFailed" type:"integer"`

	// 当前成功的操作数。
	NumberOfTasksSucceeded *int64 `locationName:"NumberOfTasksSucceeded" type:"integer"`

	// 总操作数。
	TotalNumberOfTasks *int64 `locationName:"TotalNumberOfTasks" type:"integer"`
}

type JobReport struct {
	// 任务完成报告的投递存储桶。
	Bucket *string `locationName:"Bucket" type:"string"`

	// 任务完成报告投递的前缀信息。
	Prefix *string `locationName:"Prefix" type:"string"`

	// 任务完成报告内容类型。固定取值：FailedTasksOnly。
	ReportScope *string `locationName:"ReportScope" type:"string"`

	// 是否输出任务完成报告。
	// 取值为true表示输出任务完成报告，取值为false表示不输出任务完成报告。
	Enabled *bool `locationName:"Enabled" type:"boolean"`
}

type KS3BucketDestination struct {
	// The file format of the inventory file is a CSV file compressed using GZIP after exporting the manifest file.
	Format *string `locationName:"Format" type:"string" required:"true"`

	// Bucket owner's account ID.
	AccountId *string `locationName:"AccountId" type:"string"`

	// Bucket for storing exported inventory files.
	Bucket *string `locationName:"Bucket" type:"string" required:"true"`

	// The storage path prefix of the inventory file.
	Prefix *string `locationName:"Prefix" type:"string"`
}

type KS3DeleteObject struct {
}

type KS3PutObjectAcl struct {
	// 预定义ACL，针对所有用户生效。
	// 取值：private、public-read
	// 1. 设置为private表示只有文件的拥有者可以对该文件进行读写操作，其他人无法访问该文件。
	// 2. 设置为public-read表示任何人（包括匿名访问者）都可以对该文件进行读操作。
	CannedAccessControlList *string `locationName:"CannedAccessControlList" type:"string"`

	// 针对指定用户设置ACL权限。
	AccessControlList *JobAccessControlList `locationName:"AccessControlList" type:"structure"`
}

type KS3RestoreObject struct {
	// 表示需要解冻的存储类型。
	StorageClass *string `locationName:"StorageClass" type:"string"`

	// 设置解冻优先级
	Tier *string `locationName:"Tier" type:"string"`

	// 设置解冻持续时间。
	Days *int64 `locationName:"Days" type:"integer"`
}

type Ks3Data struct {
	// 包含一个或多个Bucket的列表
	Buckets []*Ks3DataBucket `locationName:"Buckets" type:"list"`
}

type Ks3DataBucket struct {
	// Bucket的名称
	Name *string `locationName:"Name" type:"string"`

	// 数据开始时间
	StartTime *string `locationName:"StartTime" type:"string"`

	// 数据结束时间
	EndTime *string `locationName:"EndTime" type:"string"`

	// Bucket的标准存储量，单位是Bytes
	StandardDataSize *string `locationName:"StandardDataSize" type:"string"`

	// Bucket的低频存储量，单位是Bytes
	StandardIADataSize *string `locationName:"StandardIADataSize" type:"string"`

	// Bucket的归档存储量，单位是Bytes
	ArchiveDataSize *string `locationName:"ArchiveDataSize" type:"string"`

	// 标准存储的PUT请求次数
	StandardPutRequest *string `locationName:"StandardPutRequest" type:"string"`

	// 低频存储的PUT请求次数
	StandardIAPutRequest *string `locationName:"StandardIAPutRequest" type:"string"`

	// 归档存储的PUT请求次数
	ArchivePutRequest *string `locationName:"ArchivePutRequest" type:"string"`

	// 标准存储的GET请求次数
	StandardGetRequest *string `locationName:"StandardGetRequest" type:"string"`

	// 低频存储的GET请求次数
	StandardIAGetRequest *string `locationName:"StandardIAGetRequest" type:"string"`

	// 归档存储的GET请求次数
	ArchiveGetRequest *string `locationName:"ArchiveGetRequest" type:"string"`

	// 外网下行流量，单位是Bytes
	NetworkFlow *string `locationName:"NetworkFlow" type:"string"`

	// CDN回源流量，单位是Bytes
	CDNFlow *string `locationName:"CDNFlow" type:"string"`

	// 跨区域复制流量，单位是Bytes
	ReplicationFlow *string `locationName:"ReplicationFlow" type:"string"`

	// 外网上行带宽，不区分外网上行和CDN上行，单位是bps
	BandwidthUp []map[string]*string `locationName:"BandwidthUp" type:"list"`

	// 外网下行带宽，不区分外网下行和CDN下行，单位是bps
	BandwidthDown []map[string]*string `locationName:"BandwidthDown" type:"list"`

	// 外网下行带宽，单位是bps
	OuterBandwidthDown []map[string]*string `locationName:"OuterBandwidthDown" type:"list"`

	// CDN回源带宽，单位是bps
	CDNBandwidthDown []map[string]*string `locationName:"CDNBandwidthDown" type:"list"`

	// 低频存储数据取回量，单位是Bytes
	StandardIAData *string `locationName:"StandardIAData" type:"string"`

	// 外网上行带宽
	NetBandwidthUp []map[string]*string `locationName:"NetBandwidthUp" type:"list"`

	// 外网上行流量
	NetworkFlowUp *string `locationName:"NetworkFlowUp" type:"string"`

	// 内网上行带宽
	IntranetBandwidthUp []map[string]*string `locationName:"IntranetBandwidthUp" type:"list"`

	// 内网上行流量
	IntranetFlowUp *string `locationName:"IntranetFlowUp" type:"string"`

	// 内网下行带宽
	IntranetBandwidthDown []map[string]*string `locationName:"IntranetBandwidthDown" type:"list"`

	// 内网下行流量
	IntranetFlowDown *string `locationName:"IntranetFlowDown" type:"string"`

	// 桶内的对象数量
	ObjectNum *string `locationName:"ObjectNum" type:"string"`

	// 归档存储解冻数据量，单位是Bytes
	ArchiveData *string `locationName:"ArchiveData" type:"string"`

	// 对象标签的数量
	TagNum *string `locationName:"TagNum" type:"string"`

	// Object、Referer、IP、UA产生的流量
	Transfer *Ks3DataTransfer `locationName:"Transfer" type:"structure"`

	// Object、Referer、IP、UA产生的请求次数
	Request *Ks3DataRequest `locationName:"Request" type:"structure"`
}

type Ks3DataRequest struct {
	// 指定Object产生的流量
	Objects []*Ks3DataRequestObject `locationName:"Object" type:"list"`

	// 指定Referer产生的流量
	Referers []*Ks3DataRequestReferer `locationName:"Referer" type:"list"`

	// 指定IP产生的流量
	IPs []*Ks3DataRequestIP `locationName:"Ip" type:"list"`

	// 指定UA产生的流量
	UAs []*Ks3DataRequestUA `locationName:"Ua" type:"list"`
}

type Ks3DataRequestIP struct {
	// IP地址
	IP *string `locationName:"ip" type:"string"`

	// IP产生的请求次数
	Times *string `locationName:"times" type:"string"`
}

type Ks3DataRequestObject struct {
	// Object名称
	Object *string `locationName:"object" type:"string"`

	// Object产生的请求次数
	Times *string `locationName:"times" type:"string"`
}

type Ks3DataRequestReferer struct {
	// Referer名称
	Referer *string `locationName:"referer" type:"string"`

	// Referer产生的请求次数
	Times *string `locationName:"times" type:"string"`
}

type Ks3DataRequestUA struct {
	// UA名称
	UA *string `locationName:"ua" type:"string"`

	// UA产生的请求次数
	Times *string `locationName:"times" type:"string"`
}

type Ks3DataResult struct {
	// 响应码
	Code *string `locationName:"Code" type:"string"`

	// 响应信息
	Message *string `locationName:"Message" type:"string"`

	// 包含一个或多个Bucket的容器
	Data *Ks3Data `locationName:"Data" type:"structure"`

	// 请求ID
	RequestId *string `locationName:"RequestId" type:"string"`
}

type Ks3DataTransfer struct {
	// 指定Object产生的流量
	Objects []*Ks3DataTransferObject `locationName:"Object" type:"list"`

	// 指定Referer产生的流量
	Referers []*Ks3DataTransferReferer `locationName:"Referer" type:"list"`

	// 指定IP产生的流量
	IPs []*Ks3DataTransferIP `locationName:"Ip" type:"list"`

	// 指定UA产生的流量
	UAs []*Ks3DataTransferUA `locationName:"Ua" type:"list"`
}

type Ks3DataTransferIP struct {
	// IP地址
	IP *string `locationName:"ip" type:"string"`

	// IP产生的流量
	Traffic *string `locationName:"traffic" type:"string"`
}

type Ks3DataTransferObject struct {
	// Object名称
	Object *string `locationName:"object" type:"string"`

	// Object产生的流量
	Traffic *string `locationName:"traffic" type:"string"`
}

type Ks3DataTransferReferer struct {
	// Referer名称
	Referer *string `locationName:"referer" type:"string"`

	// Referer产生的流量
	Traffic *string `locationName:"traffic" type:"string"`
}

type Ks3DataTransferUA struct {
	// UA名称
	UA *string `locationName:"ua" type:"string"`

	// UA产生的流量
	Traffic *string `locationName:"traffic" type:"string"`
}

type LifecycleConfiguration struct {
	Rules []*LifecycleRule `locationName:"Rule" type:"list" flattened:"true" required:"true"`
}

type LifecycleExpiration struct {
	// Indicates at what date the object is to be moved or deleted. Should be in
	// GMT ISO 8601 Format.
	Date *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// Indicates the lifetime, in days, of the objects that are subject to the rule.
	// The value must be a non-zero positive integer.
	Days *int64 `type:"integer"`
}

type LifecycleFilter struct {
	Prefix *string `type:"string"`
	And    *And    `locationName:"And" type:"structure"`
}

type LifecycleRule struct {
	// Unique identifier for the rule. The value cannot be longer than 255 characters.
	ID *string `type:"string"`

	// If 'Enabled', the rule is currently being applied. If 'Disabled', the rule
	// is not currently being applied.
	Status *string `type:"string" required:"true"`

	// Specifies the prefix, each Rule can only have one Filter, and the prefixes of different
	// Rules cannot conflict.
	Filter *LifecycleFilter `type:"structure"`

	// Specifies the time when the object is deleted
	Expiration *LifecycleExpiration `type:"structure"`

	// Specifies when an object transitions to a specified storage class.
	Transitions []*Transition `locationName:"Transition" type:"list" flattened:"true"`

	// Specifies the expiration time for multipart uploads.
	AbortIncompleteMultipartUpload *AbortIncompleteMultipartUpload `type:"structure"`
}

type ListBucketInventoryInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	ContinuationToken *string `location:"querystring" locationName:"continuation-token" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type ListBucketInventoryOutput struct {
	InventoryConfigurationsResult *ListInventoryConfigurationsResult `locationName:"InventoryConfigurationsResult" type:"structure"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type ListBucketsInput struct {
	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type ListBucketsOutput struct {
	Buckets []*Bucket `locationNameList:"Bucket" type:"list"`

	Owner *Owner `type:"structure"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type ListInventoryConfigurationsResult struct {
	InventoryConfigurations []*InventoryConfiguration `locationName:"InventoryConfiguration" type:"list" flattened:"true"`

	IsTruncated *bool `locationName:"IsTruncated" type:"boolean"`

	NextContinuationToken *string `locationName:"NextContinuationToken" type:"string"`
}

type ListJobsInput struct {
	// 返回任务数量最大值。可配合nextToken参数实现分页返回。
	// 取值范围：1-1000
	// 默认值：1000
	// 1. 如果配置了该参数，单次返回的任务数量最多不会超过该值，如果没有配置该参数，默认最多返回1000条任务。
	// 2. 最终将按照JobId顺序进行返回。
	MaxResults *int64 `location:"querystring" locationName:"maxResults" type:"integer"`

	// 所需查询的任务状态信息。可选的任务状态包括：
	// New：表示批量处理任务刚被创建，任务正在解析中。
	// Active：表示批量操作任务正在进行中。
	// Complete：表示批量操作任务已完成，处于最终状态。
	// 如果未指定任务状态，KS3将返回所有状态的任务。如果指定了任务状态，KS3仅返回指定状态的任务。
	JobStatuses []string `location:"querystrings" locationName:"jobStatuses" type:"list"`

	// 分页符。List操作结束后将返回本次任务列表的最后一个JobId作为nextToken，在下一次List操作时传入该nextToken值，即可接续上一次List的内容进行List，用于分页。
	NextToken *string `location:"querystring" locationName:"nextToken" type:"string"`

	// 设置扩展请求头。如果现有字段不支持设置所需的请求头，您可以通过此字段进行设置。
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// 设置扩展查询参数。如果现有字段不支持设置所需的查询参数，您可以通过此字段进行设置。
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
}

type ListJobsOutput struct {
	// 包含所列举批量处理规则信息的容器。
	ListJobsResult *ListJobsResult `locationName:"ListJobsResult" type:"structure"`

	// http响应头。
	Metadata map[string]*string `location:"headers"  type:"map"`

	// http响应状态码。
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type ListJobsResult struct {
	// 包含KS3返回的多个批量处理任务信息。
	Jobs *JobList `locationName:"Jobs" type:"structure"`

	// 分页符。
	NextToken *string `locationName:"NextToken" type:"string"`
}

type ListMultipartUploadsInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// Character you use to group keys.
	Delimiter *string `location:"querystring" locationName:"delimiter" type:"string"`

	// Requests Amazon S3 to encode the object keys in the response and specifies
	// the encoding method to use. An object key may contain any Unicode character;
	// however, XML 1.0 parser cannot parse some characters, such as characters
	// with an ASCII value from 0 to 10. For characters that are not supported in
	// XML 1.0, you can add this parameter to request that Amazon S3 encode the
	// keys in the response.
	EncodingType *string `location:"querystring" locationName:"encoding-type" type:"string"`

	// Together with upload-id-marker, this parameter specifies the multipart upload
	// after which listing should begin.
	KeyMarker *string `location:"querystring" locationName:"key-marker" type:"string"`

	// Sets the maximum number of multipart uploads, from 1 to 1,000, to return
	// in the response body. 1,000 is the maximum number of uploads that can be
	// returned in a response.
	MaxUploads *int64 `location:"querystring" locationName:"max-uploads" type:"integer"`

	// Lists in-progress uploads only for those keys that begin with the specified
	// prefix.
	Prefix *string `location:"querystring" locationName:"prefix" type:"string"`

	// Together with key-marker, specifies the multipart upload after which listing
	// should begin. If key-marker is not specified, the upload-id-marker parameter
	// is ignored.
	UploadIDMarker *string `location:"querystring" locationName:"upload-id-marker" type:"string"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type ListMultipartUploadsOutput struct {
	// Name of the bucket to which the multipart upload was initiated.
	Bucket *string `type:"string"`

	CommonPrefixes []*CommonPrefix `type:"list" flattened:"true"`

	Delimiter *string `type:"string"`

	// Encoding type used by Amazon S3 to encode object keys in the response.
	EncodingType *string `type:"string"`

	// Indicates whether the returned list of multipart uploads is truncated. A
	// value of true indicates that the list was truncated. The list can be truncated
	// if the number of multipart uploads exceeds the limit allowed or specified
	// by max uploads.
	IsTruncated *bool `type:"boolean"`

	// The key at or after which the listing began.
	KeyMarker *string `type:"string"`

	// Maximum number of multipart uploads that could have been included in the
	// response.
	MaxUploads *int64 `type:"integer"`

	// When a list is truncated, this element specifies the value that should be
	// used for the key-marker request parameter in a subsequent request.
	NextKeyMarker *string `type:"string"`

	// When a list is truncated, this element specifies the value that should be
	// used for the upload-id-marker request parameter in a subsequent request.
	NextUploadIDMarker *string `locationName:"NextUploadIdMarker" type:"string"`

	// When a prefix is provided in the request, this field contains the specified
	// prefix. The result contains only keys starting with the specified prefix.
	Prefix *string `type:"string"`

	// Upload ID after which listing began.
	UploadIDMarker *string `locationName:"UploadIdMarker" type:"string"`

	Uploads []*MultipartUpload `locationName:"Upload" type:"list" flattened:"true"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type ListObjectVersionsInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// A delimiter is a character you use to group keys.
	Delimiter *string `location:"querystring" locationName:"delimiter" type:"string"`

	// Requests Amazon S3 to encode the object keys in the response and specifies
	// the encoding method to use. An object key may contain any Unicode character;
	// however, XML 1.0 parser cannot parse some characters, such as characters
	// with an ASCII value from 0 to 10. For characters that are not supported in
	// XML 1.0, you can add this parameter to request that Amazon S3 encode the
	// keys in the response.
	EncodingType *string `location:"querystring" locationName:"encoding-type" type:"string"`

	// Specifies the key to start with when listing objects in a bucket.
	KeyMarker *string `location:"querystring" locationName:"key-marker" type:"string"`

	// Sets the maximum number of keys returned in the response. The response might
	// contain fewer keys but will never contain more.
	MaxKeys *int64 `location:"querystring" locationName:"max-keys" type:"integer"`

	// Limits the response to keys that begin with the specified prefix.
	Prefix *string `location:"querystring" locationName:"prefix" type:"string"`

	// Specifies the object version you want to start listing from.
	VersionIDMarker *string `location:"querystring" locationName:"version-id-marker" type:"string"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type ListObjectVersionsOutput struct {
	CommonPrefixes []*CommonPrefix `type:"list" flattened:"true"`

	DeleteMarkers []*DeleteMarkerEntry `locationName:"DeleteMarker" type:"list" flattened:"true"`

	Delimiter *string `type:"string"`

	// Encoding type used by Amazon S3 to encode object keys in the response.
	EncodingType *string `type:"string"`

	// A flag that indicates whether or not Amazon S3 returned all of the results
	// that satisfied the search criteria. If your results were truncated, you can
	// make a follow-up paginated request using the NextKeyMarker and NextVersionIdMarker
	// response parameters as a starting place in another request to return the
	// rest of the results.
	IsTruncated *bool `type:"boolean"`

	// Marks the last Key returned in a truncated response.
	KeyMarker *string `type:"string"`

	MaxKeys *int64 `type:"integer"`

	Name *string `type:"string"`

	// Use this value for the key marker request parameter in a subsequent request.
	NextKeyMarker *string `type:"string"`

	// Use this value for the next version id marker parameter in a subsequent request.
	NextVersionIDMarker *string `locationName:"NextVersionIdMarker" type:"string"`

	Prefix *string `type:"string"`

	VersionIDMarker *string `locationName:"VersionIdMarker" type:"string"`

	Versions []*ObjectVersion `locationName:"Version" type:"list" flattened:"true"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type ListObjectsInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	// A delimiter is a character you use to group keys.
	Delimiter *string `location:"querystring" locationName:"delimiter" type:"string"`

	// Requests Amazon S3 to encode the object keys in the response and specifies
	// the encoding method to use. An object key may contain any Unicode character;
	// however, XML 1.0 parser cannot parse some characters, such as characters
	// with an ASCII value from 0 to 10. For characters that are not supported in
	// XML 1.0, you can add this parameter to request that Amazon S3 encode the
	// keys in the response.
	EncodingType *string `location:"querystring" locationName:"encoding-type" type:"string"`

	// Specifies the key to start with when listing objects in a bucket.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// Sets the maximum number of keys returned in the response. The response might
	// contain fewer keys but will never contain more.
	MaxKeys *int64 `location:"querystring" locationName:"max-keys" type:"integer"`

	// Limits the response to keys that begin with the specified prefix.
	Prefix *string `location:"querystring" locationName:"prefix" type:"string"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type ListObjectsOutput struct {
	CommonPrefixes []*CommonPrefix `type:"list" flattened:"true"`

	Contents []*Object `type:"list" flattened:"true"`

	Delimiter *string `type:"string"`

	// Encoding type used by Amazon S3 to encode object keys in the response.
	EncodingType *string `type:"string"`

	// A flag that indicates whether or not Amazon S3 returned all of the results
	// that satisfied the search criteria.
	IsTruncated *bool `type:"boolean"`

	Marker *string `type:"string"`

	MaxKeys *int64 `type:"integer"`

	Name *string `type:"string"`

	// When response is truncated (the IsTruncated element value in the response
	// is true), you can use the key name in this field as marker in the subsequent
	// request to get next set of objects. Amazon S3 lists objects in alphabetical
	// order Note: This element is returned only if you have delimiter request parameter
	// specified. If response does not include the NextMaker and it is truncated,
	// you can use the value of the last Key in the response as the marker in the
	// subsequent request to get the next set of object keys.
	NextMarker *string `type:"string"`

	Prefix *string `type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type ListPartsInput struct {
	Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"`

	Key *string `location:"uri" locationName:"Key" type:"string" required:"true"`

	// Sets the maximum number of parts to return.
	MaxParts *int64 `location:"querystring" locationName:"max-parts" type:"integer"`

	// Specifies the part after which listing should begin. Only parts with higher
	// part numbers will be listed.
	PartNumberMarker *int64 `location:"querystring" locationName:"part-number-marker" type:"integer"`

	// Confirms that the requester knows that she or he will be charged for the
	// request. Bucket owners need not specify this parameter in their requests.
	// Documentation on downloading objects from requester pays buckets can be found
	// at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
	RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string"`

	// Upload ID identifying the multipart upload whose parts are being listed.
	UploadID *string `location:"querystring" locationName:"uploadId" type:"string" required:"true"`

	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// Set extend request headers. If the existing fields do not support setting the request header you need, you can set it through this field.
	ExtendHeaders map[string]*string `location:"extendHeaders" type:"map"`

	// Set extend query params. If the existing fields do not support setting the query param you need, you can set it through this field.
	ExtendQueryParams map[string]*string `location:"extendQueryParams" type:"map"`
	// contains filtered or unexported fields
}

type ListPartsOutput struct {
	// Name of the bucket to which the multipart upload was initiated.
	Bucket *string `type:"string"`

	// Identifies who initiated the multipart upload.
	Initiator *Initiator `type:"structure"`

	// Indicates whether the returned list of parts is truncated.
	IsTruncated *bool `type:"boolean"`

	// Object key for which the multipart upload was initiated.
	Key *string `type:"string"`

	// Maximum number of parts that were allowed in the response.
	MaxParts *int64 `type:"integer"`

	// When a list is truncated, this element specifies the last part in the list,
	// as well as the value to use for the part-number-marker request parameter
	// in a subsequent request.
	NextPartNumberMarker *int64 `type:"integer"`

	Owner *Owner `type:"structure"`

	// Part number after which listing begins.
	PartNumberMarker *int64 `type:"integer"`

	Parts []*Part `locationName:"Part" type:"list" flattened:"true"`

	// If present, indicates that the requester was successfully charged for the
	// request.
	RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string"`

	// The class of storage used to store the object.
	StorageClass *string `type:"string"`

	// Upload ID identifying the multipart upload whose parts are being listed.
	UploadID *string `locationName:"UploadId" type:"string"`

	Metadata map[string]*string `location:"headers"  type:"map"`

	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}