Headwire

Headwire statically configures WireGuard peers with support for NAT traversal using DERP relays. It is experimental.

Initial connections will happen over DERP, then upgrade to a direct path if one is found:

$ headwire ping 100.64.0.2
pong from 100.64.0.2 via relay:1 in 122ms
pong from 100.64.0.2 via relay:1 in 118ms
pong from 100.64.0.2 via 203.0.113.10:41198 in 1ms

Headwire is built using Tailscale's open-source data plane libraries. See this blog post for background.

Features

• establish direct connections where possible
• fall back to relayed connections
• continue using ordinary WireGuard peers
• a macOS app

Configuration Example

Run your own DERP servers. Tailscale runs "free rate-limited DERP relays" for Tailcat, see its DERP map.

[DERPRegion]
ID = 1
Nodes = derp1.example.com, derp2.example.com

[Interface]
PrivateKey = <base64 private key from headwire genkey>
Address = 100.64.0.1/32
HomeDERP = 1

[Peer]
PublicKey = <peer base64 public key>
DiscoKey = <peer base64 disco key>
AllowedIPs = 100.64.0.2/32, 10.20.0.0/16
HomeDERP = 1

• Every peer has a WireGuard PublicKey.
• Ordinary WireGuard peers use a fixed Endpoint.
• Headwire peers have a DiscoKey and HomeDERP region.
• See the more complete example.

Usage

Install a release from the project releases page, then create a configuration:

sudo install -d -o root -g "$(id -g root)" -m 755 /etc/headwire
sudo install -o root -g "$(id -g root)" -m 600 /dev/null /etc/headwire/main.conf
sudoedit /etc/headwire/main.conf
sudo headwire check

Run Headwire:

sudo headwire run

Or as a service:

sudo systemctl enable --now headwire
sudo systemctl status headwire

CLI Reference

usage: headwire <command>

Commands:
  show [FIELD]           status of the running node, --help lists fields
  ip [-1|-4|-6]          local addresses of the running node
  ping IP                disco-ping up to 10 times, stopping at a direct response
  check [NAME | FILE]    validate the configuration (default: main)
  genkey                 print a new private key
  pubkey                 read a private key on stdin, print its WireGuard public key
  discokey               read a private key on stdin, print its discovery public key
  genpsk                 print a new preshared key
  netcheck [NAME | FILE] probe connectivity to configured relay regions
  version                print the build version
  run [NAME | FILE]      run the node on a TUN interface (root, default: main)

NAME selects /etc/headwire/NAME.conf, any other argument is a file.
Use help COMMAND or COMMAND --help for command-specific help.

Configuration Reference

A key marked * may be repeated or given as a comma-separated list.

AllowIn is any, none, or PROTO[/PORT[-PORT]], optionally followed by to self|any|IP|CIDR. PROTO is tcp, udp, sctp, icmp or a protocol number, and only the first three take ports. The default is any. Examples:

AllowIn = tcp/22, icmp
AllowIn = udp/5000-5100 to self

Legal

This project is not associated with Tailscale Inc. or WireGuard.

Tailscale is a registered trademark of Tailscale Inc.

WireGuard is a registered trademark of Jason A. Donenfeld.