tracing

const (
	BalanceChangeUnspecified BalanceChangeReason = 0

	// Issuance
	// BalanceIncreaseRewardMineUncle is a reward for mining an uncle block.
	BalanceIncreaseRewardMineUncle BalanceChangeReason = 1
	// BalanceIncreaseRewardMineBlock is a reward for mining a block.
	BalanceIncreaseRewardMineBlock BalanceChangeReason = 2
	// BalanceIncreaseWithdrawal is ether withdrawn from the beacon chain.
	BalanceIncreaseWithdrawal BalanceChangeReason = 3
	// BalanceIncreaseGenesisBalance is ether allocated at the genesis block.
	BalanceIncreaseGenesisBalance BalanceChangeReason = 4

	// Transaction fees
	// BalanceIncreaseRewardTransactionFee is the transaction tip increasing block builder's balance.
	BalanceIncreaseRewardTransactionFee BalanceChangeReason = 5
	// BalanceDecreaseGasBuy is spent to purchase gas for execution a transaction.
	// Part of this gas will be burnt as per EIP-1559 rules.
	BalanceDecreaseGasBuy BalanceChangeReason = 6
	// BalanceIncreaseGasReturn is ether returned for unused gas at the end of execution.
	BalanceIncreaseGasReturn BalanceChangeReason = 7

	// DAO fork
	// BalanceIncreaseDaoContract is ether sent to the DAO refund contract.
	BalanceIncreaseDaoContract BalanceChangeReason = 8
	// BalanceDecreaseDaoAccount is ether taken from a DAO account to be moved to the refund contract.
	BalanceDecreaseDaoAccount BalanceChangeReason = 9

	// BalanceChangeTransfer is ether transferred via a call.
	// it is a decrease for the sender and an increase for the recipient.
	BalanceChangeTransfer BalanceChangeReason = 10
	// BalanceChangeTouchAccount is a transfer of zero value. It is only there to
	// touch-create an account.
	BalanceChangeTouchAccount BalanceChangeReason = 11

	// BalanceIncreaseSelfdestruct is added to the recipient as indicated by a selfdestructing account.
	BalanceIncreaseSelfdestruct BalanceChangeReason = 12
	// BalanceDecreaseSelfdestruct is deducted from a contract due to self-destruct.
	BalanceDecreaseSelfdestruct BalanceChangeReason = 13
	// BalanceDecreaseSelfdestructBurn is ether that is sent to an already self-destructed
	// account within the same tx (captured at end of tx).
	// Note it doesn't account for a self-destruct which appoints itself as recipient.
	BalanceDecreaseSelfdestructBurn BalanceChangeReason = 14

	// BalanceChangeRevert is emitted when the balance is reverted back to a previous value due to call failure.
	// It is only emitted when the tracer has opted in to use the journaling wrapper (WrapWithJournal).
	BalanceChangeRevert BalanceChangeReason = 15

	// BalanceDecreaseBSCDistributeReward is a balance change that decreases system address' balance and happens
	// when BSC is distributing rewards to validator.
	BalanceDecreaseBSCDistributeReward BalanceChangeReason = 210
	// BalanceIncreaseBSCDistributeReward is a balance change that increases the block validator's balance and
	// happens when BSC is distributing rewards to validator.
	BalanceIncreaseBSCDistributeReward BalanceChangeReason = 211
)

const (
	GasChangeUnspecified GasChangeReason = 0

	// GasChangeTxInitialBalance is the initial balance for the call which will be equal to the gasLimit of the call. There is only
	// one such gas change per transaction.
	GasChangeTxInitialBalance GasChangeReason = 1
	// GasChangeTxIntrinsicGas is the amount of gas that will be charged for the intrinsic cost of the transaction, there is
	// always exactly one of those per transaction.
	GasChangeTxIntrinsicGas GasChangeReason = 2
	// GasChangeTxRefunds is the sum of all refunds which happened during the tx execution (e.g. storage slot being cleared)
	// this generates an increase in gas. There is at most one of such gas change per transaction.
	GasChangeTxRefunds GasChangeReason = 3
	// GasChangeTxLeftOverReturned is the amount of gas left over at the end of transaction's execution that will be returned
	// to the chain. This change will always be a negative change as we "drain" left over gas towards 0. If there was no gas
	// left at the end of execution, no such even will be emitted. The returned gas's value in Wei is returned to caller.
	// There is at most one of such gas change per transaction.
	GasChangeTxLeftOverReturned GasChangeReason = 4

	// GasChangeCallInitialBalance is the initial balance for the call which will be equal to the gasLimit of the call. There is only
	// one such gas change per call.
	GasChangeCallInitialBalance GasChangeReason = 5
	// GasChangeCallLeftOverReturned is the amount of gas left over that will be returned to the caller, this change will always
	// be a negative change as we "drain" left over gas towards 0. If there was no gas left at the end of execution, no such even
	// will be emitted.
	GasChangeCallLeftOverReturned GasChangeReason = 6
	// GasChangeCallLeftOverRefunded is the amount of gas that will be refunded to the call after the child call execution it
	// executed completed. This value is always positive as we are giving gas back to the you, the left over gas of the child.
	// If there was no gas left to be refunded, no such even will be emitted.
	GasChangeCallLeftOverRefunded GasChangeReason = 7
	// GasChangeCallContractCreation is the amount of gas that will be burned for a CREATE.
	GasChangeCallContractCreation GasChangeReason = 8
	// GasChangeCallContractCreation2 is the amount of gas that will be burned for a CREATE2.
	GasChangeCallContractCreation2 GasChangeReason = 9
	// GasChangeCallCodeStorage is the amount of gas that will be charged for code storage.
	GasChangeCallCodeStorage GasChangeReason = 10
	// GasChangeCallOpCode is the amount of gas that will be charged for an opcode executed by the EVM, exact opcode that was
	// performed can be check by `OnOpcode` handling.
	GasChangeCallOpCode GasChangeReason = 11
	// GasChangeCallPrecompiledContract is the amount of gas that will be charged for a precompiled contract execution.
	GasChangeCallPrecompiledContract GasChangeReason = 12
	// GasChangeCallStorageColdAccess is the amount of gas that will be charged for a cold storage access as controlled by EIP2929 rules.
	GasChangeCallStorageColdAccess GasChangeReason = 13
	// GasChangeCallFailedExecution is the burning of the remaining gas when the execution failed without a revert.
	GasChangeCallFailedExecution GasChangeReason = 14
	// GasChangeWitnessContractInit flags the event of adding to the witness during the contract creation initialization step.
	GasChangeWitnessContractInit GasChangeReason = 15
	// GasChangeWitnessContractCreation flags the event of adding to the witness during the contract creation finalization step.
	GasChangeWitnessContractCreation GasChangeReason = 16
	// GasChangeWitnessCodeChunk flags the event of adding one or more contract code chunks to the witness.
	GasChangeWitnessCodeChunk GasChangeReason = 17
	// GasChangeWitnessContractCollisionCheck flags the event of adding to the witness when checking for contract address collision.
	GasChangeWitnessContractCollisionCheck GasChangeReason = 18
	// GasChangeTxDataFloor is the amount of extra gas the transaction has to pay to reach the minimum gas requirement for the
	// transaction data. This change will always be a negative change.
	GasChangeTxDataFloor GasChangeReason = 19

	// GasChangeIgnored is a special value that can be used to indicate that the gas change should be ignored as
	// it will be "manually" tracked by a direct emit of the gas change event.
	GasChangeIgnored GasChangeReason = 0xFF
)

const (
	NonceChangeUnspecified NonceChangeReason = 0

	// NonceChangeGenesis is the nonce allocated to accounts at genesis.
	NonceChangeGenesis NonceChangeReason = 1

	// NonceChangeEoACall is the nonce change due to an EoA call.
	NonceChangeEoACall NonceChangeReason = 2

	// NonceChangeContractCreator is the nonce change of an account creating a contract.
	NonceChangeContractCreator NonceChangeReason = 3

	// NonceChangeNewContract is the nonce change of a newly created contract.
	NonceChangeNewContract NonceChangeReason = 4

	// NonceChangeTransaction is the nonce change due to a EIP-7702 authorization.
	NonceChangeAuthorization NonceChangeReason = 5

	// NonceChangeRevert is emitted when the nonce is reverted back to a previous value due to call failure.
	// It is only emitted when the tracer has opted in to use the journaling wrapper (WrapWithJournal).
	NonceChangeRevert NonceChangeReason = 6
)