app

type ActivateSessionRequest struct {
	// Authentication Type for session.
	// The selected type will be used for session activation and for all subsequent authenticated packets under the session, unless "Per-message Authentication" or "User Level Authentication" are disabled.
	// (See v1.5§6.11.4 / v2.0§6.12.4, Per-Message and User Level Authentication Disables, for more information.)
	//
	// This value must match with the Authentication Type used in the Get Session Challenge request for the session. In addition, for multi-session channels this value must also match the authentication type used in the Session Header.
	AuthTypeForSession types.AuthType

	// Maximum privilege level requested. Indicates the highest privilege level that
	// may be requested for this session. This privilege level must be less than
	// or equal to the privilege limit for the channel and the privilege limit for the
	// user in order for the Activate Session command to be successful
	// (completion code = 00h). Once the Activate Session command has been
	// successful, the requested privilege level becomes a 'session limit' that
	// cannot be raised beyond the requested level, even if the user and/or
	// channel privilege level limits would allow it. I.e. it takes precedence over
	// the channel and user privilege level limits.
	//
	// [7:4] - reserved
	// [3:0] - Requested Maximum Privilege Level
	// 0h = reserved
	// 1h = Callback level
	// 2h = User level
	// 3h = Operator level
	// 4h = Administrator level
	// 5h = OEM Proprietary level
	// all other = reserved
	MaxPrivilegeLevel types.PrivilegeLevel

	// For multi-session channels: (e.g. LAN channel):
	// Challenge String data from corresponding Get Session Challenge response.
	//
	// For single-session channels that lack session header (e.g. serial/modem in Basic Mode):
	// Clear text password or AuthCode. See v1.5§18.15.1 / v2.0§22.17.1, AuthCode Algorithms.
	Challenge [16]byte // uint16

	// Initial Outbound Sequence Number = Starting sequence number that remote console wants used for messages from the BMC. (LS byte first). Must be non-null in order to establish a session. 0000_0000h = reserved. Can be any random value.
	//
	// The BMC must increment the outbound session sequence number by one (1) for
	// each subsequent outbound message from the BMC (include ActivateSessionResponse)
	//
	// The BMC sets the incremented number to Sequence field of SessionHeader.
	InitialOutboundSequenceNumber uint32
}

type ActivateSessionResponse struct {
	// Authentication Type for remainder of session
	AuthType types.AuthType

	// use this for remainder of session.
	// While atypical, the BMC is allowed to change the Session ID from the one that passed in the request.
	SessionID uint32

	// Initial inbound seq# = Sequence number that BMC wants remote console to use for subsequent messages in the session. The BMC returns a non-null value for multi-session connections and returns null (all 0s) for single-session connections.
	//
	// The remote console must increment the inbound session sequence number by one (1) for each subsequent message it sends to the BMC.
	InitialInboundSequenceNumber uint32

	// Maximum privilege level allowed for this session
	//  [7:4] - reserved
	//  [3:0] - Maximum Privilege Level allowed
	//  0h = reserved
	//  1h = Callback level
	//  2h = User level
	//  3h = Operator level
	//  4h = Administrator level
	//  5h = OEM Proprietary level
	//  all other = reserved
	MaxPrivilegeLevel uint8
}

type AdditionalDeviceSupport struct {
	SupportChassis            bool
	SupportBridge             bool
	SupportIPMBEventGenerator bool
	SupportIPMBEventReceiver  bool
	SupportFRUInventory       bool
	SupportSEL                bool
	SupportSDRRepo            bool
	SupportSensor             bool
}

type CloseSessionRequest struct {
	// For IPMI v2.0/RMCP+ this is the Managed System Session ID value that was generated by the BMC, not the ID from the remote console. If Session ID = 0000_0000h then an implementation can optionally enable this command to take an additional byte of parameter data that allows a session handle to be used to close a session.
	SessionID uint32

	// Session Handle. (only present if Session ID = 0000_0000h)
	SessionHandle uint8
}

type CloseSessionResponse struct {
}

type ColdResetRequest struct {
}

type ColdResetResponse struct {
}

type CommandRangeMask uint8

type EnableMessageChannelReceiveRequest struct {
	ChannelNumber uint8

	// [7:2] - reserved
	// [1:0] - 00b = disable channel
	//         01b = enable channel
	//         10b = get channel enable/disable state
	//         11b = reserved
	ChannelState uint8
}

type EnableMessageChannelReceiveResponse struct {
	ChannelNumber uint8

	ChannelEnabled bool
}

type GetAuthCodeRequest struct {
	AuthType types.AuthType

	ChannelNumber uint8

	UserID uint8

	// data to hash (must be 16 bytes)
	Data [16]byte
}

type GetAuthCodeResponse struct {
	types.CompletionCode

	// For IPMI v1.5 AuthCode Number:
	AuthCode [16]byte

	// For IPMI v2.0 Integrity Algorithm Number
	// Resultant hash, per selected Integrity algorithm. Up to 20 bytes. An
	// implementation can elect to return a variable length field based on the size of
	// the hash for the given integrity algorithm, or can return a fixed field where the
	// hash data is followed by 00h bytes as needed to pad the data to 20 bytes.
	Hash []byte
}

type GetBTInterfaceCapabilitiesRequest struct {
}

type GetBTInterfaceCapabilitiesResponse struct {
	OutstandingRequestsCountSupported uint8
	InputBufferMessageSizeBytes       uint8
	OutputBufferMessageSizeBytes      uint8
	BMCRequestToResponseTimeSec       uint8
	RecommendedRetries                uint8
}

type GetChannelAccessRequest struct {
	ChannelNumber uint8

	AccessOption types.ChannelAccessOption
}

type GetChannelAccessResponse struct {
	PEFAlertingDisabled   bool
	PerMsgAuthDisabled    bool
	UserLevelAuthDisabled bool
	AccessMode            types.ChannelAccessMode

	MaxPrivilegeLevel types.PrivilegeLevel
}

type GetChannelAuthenticationCapabilitiesRequest struct {
	// [7]
	// - 1b = get IPMI v2.0+ extended data.
	// If the given channel supports authentication but does not support RMCP+
	// (e.g. a serial channel), then the Response data should return with bit [5] of byte 4 = 0b, byte 5 should return 01h,
	//
	// - 0b = Backward compatible with IPMI v1.5. Response data only returns
	// bytes 1:9, bit [7] of byte 3 (Authentication Type Support) and bit [5] of byte 4 returns as 0b, bit [5] of byte 5 returns 00h.
	// [6:4] - reserved
	IPMIv20Extended bool
	// [3:0] - channel number.
	// 0h-Bh, Fh = channel numbers
	// Eh = retrieve information for channel this request was issued on
	ChannelNumber uint8

	// Requested Maximum Privilege Level
	MaximumPrivilegeLevel types.PrivilegeLevel
}

type GetChannelAuthenticationCapabilitiesResponse struct {
	// Channel number that the Authentication Capabilities is being returned for.
	// If the channel number in the request was set to Eh, this will return
	// the channel number for the channel that the request was received on
	ChannelNumber uint8

	// Returns the setting of the Authentication Type Enable field from the
	// configuration parameters for the given channel that corresponds to
	// the Requested Maximum Privilege Level.
	// [7] -
	// 1b = IPMI v2.0+ extended capabilities available. See Extended Capabilities field, below.
	// 0b = IPMI v1.5 support only.
	IPMIv20ExtendedAvailable bool
	// [5:0] - IPMI v1.5 Authentication type(s) enabled for given Requested Maximum Privilege Level
	AuthTypeNoneSupported           bool // bit 0
	AuthTypeMD2Supported            bool // bit 1
	AuthTypeMD5Supported            bool // bit 2
	AuthTypePasswordSupported       bool // bit 4
	AuthTypeOEMProprietarySupported bool // bit 5

	// [5] - Kg status (two-key login status).
	// Applies to v2.0/RMCP+ RAKP Authentication only. Otherwise, ignore as reserved.
	// 0b = Kg is set to default (all 0s).
	// 1b = Kg is set to non-zero value.
	KgStatus bool
	// [4] - Per-message Authentication status
	// 0b = Per-message Authentication is enabled.
	// 1b = Per-message Authentication is disabled.
	// Authentication Type "none" accepted for packets to the BMC after the session has been activated.
	PerMessageAuthenticationDisabled bool
	// [3] - User Level Authentication status
	// 0b = User Level Authentication is enabled.
	// 1b = User Level Authentication is disabled.
	// Authentication Type "none" accepted for User Level commands to the BMC.
	UserLevelAuthenticationDisabled bool
	// [2:0] - Anonymous Login status
	// This parameter returns values that tells the remote console whether
	// there are users on the system that have "null" usernames.
	// This can be used to guide the way the remote console presents login options to the user.
	// (see IPMI v1.5 specification sections 6.9.1, "Anonymous Login" Convention and 6.9.2, Anonymous Login )
	// [2] - 1b = Non-null usernames enabled. (One or more users are enabled that have non-null usernames).
	// [1] - 1b = Null usernames enabled (One or more users that have a null username, but non-null password, are presently enabled)
	// [0] - 1b = Anonymous Login enabled (A user that has a null username and null password is presently enabled)
	NonNullUsernamesEnabled bool
	NullUsernamesEnabled    bool
	AnonymousLoginEnabled   bool

	// For IPMI v1.5: - reserved
	// For IPMI v2.0+: - Extended Capabilities
	// [7:2] - reserved
	// [1] - 1b = channel supports IPMI v2.0 connections.
	// [0] - 1b = channel supports IPMI v1.5 connections.
	SupportIPMIv15 bool
	SupportIPMIv20 bool

	// IANA Enterprise Number for OEM/Organization that specified the particular
	// OEM Authentication Type for RMCP. Least significant byte first.
	// ONLY 3 bytes occupied. Return 00h, 00h, 00h if no OEM authentication type available.
	OEMID uint32

	// Additional OEM-specific information for the OEM Authentication Type for RMCP.
	// Return 00h if no OEM authentication type available.
	OEMAuxiliaryData uint8
}

type GetChannelCipherSuitesRequest struct {
	// 0h-Bh, Fh = channel numbers
	// Eh = retrieve information for channel this request was issued on
	ChannelNumber uint8
	PayloadType   types.PayloadType
	ListIndex     uint8
}

type GetChannelCipherSuitesResponse struct {
	ChannelNumber      uint8
	CipherSuiteRecords []byte
}

type GetChannelInfoRequest struct {
	ChannelNumber uint8
}

type GetChannelInfoResponse struct {
	ActualChannelNumber uint8
	ChannelMedium       types.ChannelMedium   // Channel Medium Type Numbers
	ChannelProtocol     types.ChannelProtocol // Channel Protocol Type Numbers
	SessionSupport      uint8
	ActiveSessionCount  uint8
	VendorID            uint32 // (IANA Enterprise Number) for OEM/Organization that specified the Channel Protocol.

	// Auxiliary Channel Info
	Auxiliary []byte // Auxiliary Channel Info Raw Data, 2 bytes

	// For Channel = Fh (System Interface)
	SMSInterruptType                InterruptType
	EventMessageBufferInterruptType InterruptType
}

type GetCommandEnablesRequest struct {
	ChannelNumber uint8

	CommandRangeMask CommandRangeMask
	NetFn            types.NetFn
	LUN              uint8

	CodeForNetFn2C uint8
	OEMIANA        uint32 // 3 bytes only
}

type GetCommandEnablesResponse struct {
	// Todo
	CommandEnableMask []byte
}

type GetCommandSubfunctionEnablesRequest struct {
	ChannelNumber uint8

	NetFn types.NetFn
	LUN   uint8
	Cmd   uint8

	CodeForNetFn2C uint8
	OEMIANA        uint32 // 3 bytes only
}

type GetCommandSubfunctionEnablesResponse struct {
	SubfunctionEnables []bool
}

type GetCommandSubfunctionSupportRequest struct {
	ChannelNumber uint8

	NetFn types.NetFn
	LUN   uint8
	Cmd   uint8

	CodeForNetFn2C uint8
	OEMIANA        uint32 // 3 bytes only
}

type GetCommandSubfunctionSupportResponse struct {
	SpecificationType uint8
	ErrataVersion     uint8
	OEMGroupBody      uint8

	SpecificationVersion  uint8
	SpecificationRevision uint8

	// Todo
	SupportMask []byte
}

type GetCommandSupportRequest struct {
	ChannelNumber uint8

	CommandRangeMask CommandRangeMask
	NetFn            types.NetFn
	LUN              uint8

	CodeForNetFn2C uint8
	OEMIANA        uint32 // 3 bytes only
}

type GetCommandSupportResponse struct {
	// Todo
	CommandSupportMask []byte
}

type GetConfigurableCommandSubfunctionsRequest struct {
	ChannelNumber uint8

	NetFn types.NetFn
	LUN   uint8

	Cmd uint8

	CodeForNetFn2C uint8  // For Network Function = 2Ch
	OEMIANA        uint32 // For Network Function = 2Eh
}

type GetConfigurableCommandSubfunctionsResponse struct {
	// the index corresponds to sub-function number
	// index 0 -> sub-function 0
	// index 1 -> sub-function 1
	SubfunctionsSupport []bool
}

type GetConfigurableCommandsRequest struct {
	ChannelNumber uint8

	CommandRangeMask CommandRangeMask
	NetFn            types.NetFn
	LUN              uint8

	CodeForNetFn2C uint8
	OEMIANA        uint32 // 3 bytes only
}

type GetConfigurableCommandsResponse struct {
	// Todo
	CommandSupportMask []byte
}

type GetDeviceGUIDRequest struct {
}

type GetDeviceGUIDResponse struct {
	GUID [16]byte
}

type GetDeviceIDRequest struct {
}

type GetDeviceIDResponse struct {
	DeviceID uint8

	// [7] 1 = device provides Device SDRs
	// 0 = device does not provide Device SDRs
	// [6:4] reserved. Return as 0.
	ProvideDeviceSDRs bool
	// [3:0] Device Revision, binary encoded
	DeviceRevision uint8

	// [7] Device available: 0=normal operation, 1= device firmware, SDR
	// Repository update or self-initialization in progress. [Firmware / SDR
	// Repository updates can be differentiated by issuing a Get SDR
	// command and checking the completion code.]
	DeviceAvailable bool
	// [6:0] Major Firmware Revision, binary encoded
	MajorFirmwareRevision uint8

	// BCD encoded
	MinorFirmwareRevision uint8

	// Holds IPMI Command Specification Version. BCD encoded.
	// 00h = reserved.
	// Bits 7:4 hold the Least Significant digit of the revision, while
	// bits 3:0 hold the Most Significant bits.
	// E.g. a value of 51h indicates revision 1.5 functionality.
	// 02h for implementations that provide IPMI v2.0 capabilities
	// per this specification.
	MajorIPMIVersion uint8
	MinorIPMIVersion uint8

	AdditionalDeviceSupport

	// Manufacturer ID, LS Byte first. The manufacturer ID is a 20-bit value that is
	// derived from the IANA Private Enterprise ID (see below).
	// Most significant four bits = reserved (0000b).
	// 000000h = unspecified. 0FFFFFh = reserved. This value is binary encoded.
	// E.g. the ID for the IPMI forum is 7154 decimal, which is 1BF2h, which would
	// be stored in this record as F2h, 1Bh, 00h for bytes 8 through 10, respectively
	ManufacturerID uint32 // only 3 bytes used

	// Product ID, LS Byte first. This field can be used to provide a number that
	// identifies a particular system, module, add-in card, or board set. The number
	// is specified according to the manufacturer given by Manufacturer ID (see
	// below).
	// 0000h = unspecified. FFFFh = reserved.
	ProductID uint16

	// Auxiliary Firmware Revision Information. This field is optional. If present, it
	// holds additional information about the firmware revision, such as boot block or
	// internal data structure version numbers. The meanings of the numbers are
	// specific to the vendor identified by Manufacturer ID (see below). When the
	// vendor-specific definition is not known, generic utilities should display each
	// byte as 2-digit hexadecimal numbers, with byte 13 displayed first as the most-significant byte.
	AuxiliaryFirmwareRevision []byte // 4 bytes
}

type GetNetFnSupportRequest struct {
	ChannelNumber uint8
}

type GetNetFnSupportResponse struct {
	LUN3Support LUNSupport
	LUN2Support LUNSupport
	LUN1Support LUNSupport
	LUN0Support LUNSupport

	// Todo
	NetFnPairsSupport []byte
}

type GetSelfTestResultsRequest struct {
}

type GetSelfTestResultsResponse struct {
	Byte1 uint8
	Byte2 uint8
}

type GetSessionChallengeRequest struct {
	// Authentication Type for Challenge
	// indicating what type of authentication type the console wants to use.
	AuthType types.AuthType

	// Sixteen-bytes. All 0s for null user name (User 1)
	Username [16]byte
}

type GetSessionChallengeResponse struct {
	TemporarySessionID uint32 // LS byte first
	Challenge          [16]byte
}

type GetSessionInfoRequest struct {
	// Session index
	//   00h = Return info for active session associated with session this command was received over.
	//   N = get info for Nth active session
	//   FEh = Look up session info according to Session Handle passed in this request.
	//   FFh = Look up session info according to Session ID passed in this request.
	SessionIndex uint8

	SessionHandle uint8

	SessionID uint32
}

type GetSessionInfoResponse struct {
	SessionHandle          uint8 // Session Handle presently assigned to active session.
	PossibleActiveSessions uint8 // This value reflects the number of possible entries (slots) in the sessions table.
	CurrentActiveSessions  uint8 // Number of currently active sessions on all channels on this controller

	UserID                  uint8
	OperatingPrivilegeLevel types.PrivilegeLevel

	// [7:4] - Session protocol auxiliary data
	// For Channel Type = 802.3 LAN:
	// 0h = IPMI v1.5
	// 1h = IPMI v2.0/RMCP+
	AuxiliaryData uint8 // 4bits
	ChannelNumber uint8 // 4bits

	// if Channel Type = 802.3 LAN:
	RemoteConsoleIPAddr  net.IP           // IP Address of remote console (MS-byte first).
	RemoteConsoleMacAddr net.HardwareAddr // 6 bytes, MAC Address (MS-byte first)
	RemoteConsolePort    uint16           // Port Number of remote console (LS-byte first)

	// if Channel Type = asynch. serial/modem
	SessionChannelActivityType uint8
	DestinationSelector        uint8
	RemoteConsoleIPAddr_PPP    uint32 // If PPP connection: IP address of remote console. (MS-byte first) 00h, 00h, 00h, 00h otherwise.

	// if Channel Type = asynch. serial/modem and connection is PPP:
	RemoteConsolePort_PPP uint16
}

type GetSystemGUIDRequest struct {
}

type GetSystemGUIDResponse struct {
	// Note that the individual fields within the GUID are stored least-significant byte first
	GUID [16]byte
}

type GetSystemInfoParamRequest struct {
	GetParamRevisionOnly bool
	ParamSelector        types.SystemInfoParamSelector
	SetSelector          uint8
	BlockSelector        uint8
}

type GetSystemInfoParamResponse struct {
	ParamRevision uint8
	ParamData     []byte
}

type GetSystemInterfaceCapabilitiesRequest struct {
	SystemInterfaceType SystemInterfaceType
}

type GetSystemInterfaceCapabilitiesResponse struct {
	// For System Interface Type = SSIF
	TransactionSupportMask uint8
	PECSupported           bool
	SSIFVersion            uint8
	InputMessageSizeBytes  uint8
	OutputMessageSizeBytes uint8

	// For System Interface Type = KCS or SMIC
	SystemInterfaceVersion       uint8
	InputMaximumMessageSizeBytes uint8
}

type GetUserAccessRequest struct {
	ChannelNumber uint8
	UserID        uint8
}

type GetUserAccessResponse struct {
	// Maximum number of User IDs. 1-based. Count includes User 1. A value of 1
	// indicates only User 1 is supported.
	MaxUsersIDCount uint8

	// [7:6] - User ID Enable status (for IPMI v2.0 errata 3 and later implementations).
	// 00b = User ID enable status unspecified. (For backward compatibility
	// with pre-errata 3 implementations. IPMI errata 3 and later
	// implementations should return the 01b and 10b responses.)
	// 01b = User ID enabled via Set User Password command.
	// 10b = User ID disabled via Set User Password command.
	// 11b = reserved
	EnableStatus uint8

	// [5:0] - count of currently enabled user IDs on this channel (Indicates how
	// many User ID slots are presently in use.)
	EnabledUserIDsCount uint8

	// Count of User IDs with fixed names, including User 1 (1-based). Fixed names
	// in addition to User 1 are required to be associated with sequential user IDs
	// starting from User ID 2.
	FixedNameUseIDsCount uint8

	// [6] - 0b = user access available during call-in or callback direct connection
	//       1b = user access available only during callback connection
	CallbackOnly bool

	// [5] - 0b = user disabled for link authentication
	//       1b = user enabled for link authentication
	LinkAuthEnabled bool

	// [4] - 0b = user disabled for IPMI Messaging
	//       1b = user enabled for IPMI Messaging
	IPMIMessagingEnabled bool

	// [3:0] - User Privilege Limit for given Channel
	MaxPrivLevel types.PrivilegeLevel
}

type GetUserPayloadAccessRequest struct {
	ChannelNumber uint8

	UserID uint8
}

type GetUserPayloadAccessResponse struct {
	PayloadTypeSOL  bool
	PayloadTypeOEM0 bool
	PayloadTypeOEM1 bool
	PayloadTypeOEM2 bool
	PayloadTypeOEM3 bool
	PayloadTypeOEM4 bool
	PayloadTypeOEM5 bool
	PayloadTypeOEM6 bool
	PayloadTypeOEM7 bool
}

type GetUsernameRequest struct {
	// [5:0] - User ID. 000000b = reserved. (User ID 1 is permanently associated with User 1, the null user name).
	UserID uint8
}

type GetUsernameResponse struct {
	Username string
}

type GetWatchdogTimerRequest struct {
}

type GetWatchdogTimerResponse struct {
	DontLog        bool
	TimerIsStarted bool
	TimerUse       TimerUse

	PreTimeoutInterrupt   PreTimeoutInterrupt
	TimeoutAction         TimeoutAction
	PreTimeoutIntervalSec uint8

	ExpirationFlags  uint8
	InitialCountdown uint16
	PresentCountdown uint16
}

type InterruptType uint8

type LUNSupport uint8

type ManufacturingTestOnRequest struct {
}

type ManufacturingTestOnResponse struct {
}

type MasterWriteReadRequest struct {
	// [7:4] channel number (Ignored when bus type = 1b)
	ChannelNumber uint8
	// [3:1] bus ID, 0-based (always 000b for public bus [bus type = 0b])
	BusID uint8
	// [0] bus type:
	// - 0b = public (e.g. IPMB or PCI Management Bus.
	//   The channel number value is used to select the target bus.)
	// - 1b = private bus (The bus ID value is used to select the target bus.)
	BusTypeIsPrivate bool

	SlaveAddress uint8

	ReadCount uint8

	// Data to write. This command should support at least 35 bytes of write data
	Data []byte
}

type MasterWriteReadResponse struct {
	// Bytes read from specified slave address.
	// This field will be absent if the read count is 0.
	// The controller terminates the I2C transaction with a STOP condition after reading the requested number of bytes.
	Data []byte
}

type PasswordOperation uint8

type PreTimeoutInterrupt uint8

type ResetWatchdogTimerRequest struct {
}

type ResetWatchdogTimerResponse struct {
}

type SendMessageRequest struct {
	// [7:6] 00b = No tracking
	// 01b = Track Request.
	// 10b = Send Raw. (optional)
	// 11b = reserved
	TrackMask uint8

	Encrypted bool

	Authenticated bool

	ChannelNumber uint8

	// Todo
	MessageData []byte
}

type SendMessageResponse struct {
	// This data will only be present when using the Send Message command to
	// originate requests from IPMB or PCI Management Bus to other channels
	// such as LAN or serial/modem. It is not present in the response to a
	// Send Message command delivered via the System Interface.
	Data []byte
}

type SetChannelAccessRequest struct {
	ChannelNumber uint8

	// [7:6] - 00b = don't set or change Channel Access
	//         01b = set non-volatile Channel Access according to bits [5:0]
	//         10b = set volatile (active) setting of Channel Access according to bit [5:0]
	//         11b = reserved
	AccessOption         uint8
	DisablePEFAlerting   bool
	DisablePerMsgAuth    bool
	DisableUserLevelAuth bool
	AccessMode           types.ChannelAccessMode

	PrivilegeOption   uint8
	MaxPrivilegeLevel uint8
}

type SetChannelAccessResponse struct {
}

type SetCommandEnablesRequest struct {
	ChannelNumber uint8

	CommandRangeMask CommandRangeMask
	NetFn            types.NetFn
	LUN              uint8

	// if CommandRangeMask == CommandRangeMask007F
	CommandsMaskBytes [16]byte

	CodeForNetFn2C uint8
	OEMIANA        uint32 // 3 bytes only
}

type SetCommandEnablesResponse struct {
}

type SetCommandSubfunctionEnablesRequest struct {
	ChannelNumber uint8

	CommandRangeMask CommandRangeMask
	NetFn            types.NetFn
	LUN              uint8
	Cmd              uint8

	CodeForNetFn2C uint8
	OEMIANA        uint32 // 3 bytes only

	SubfunctionEnables []bool
}

type SetCommandSubfunctionEnablesResponse struct {
}

type SetSessionPrivilegeLevelRequest struct {
	PrivilegeLevel types.PrivilegeLevel
}

type SetSessionPrivilegeLevelResponse struct {
	// New Privilege Level (or present level if 'return present privilege level' was selected.)
	PrivilegeLevel uint8
}

type SetSystemInfoParamRequest struct {
	ParamSelector types.SystemInfoParamSelector
	ParamData     []byte
}

type SetSystemInfoParamResponse struct {
}

type SetUserAccessRequest struct {
	EnableChanging bool

	RestrictedToCallback bool

	EnableLinkAuth bool

	EnableIPMIMessaging bool

	ChannelNumber uint8

	UserID uint8

	MaxPrivLevel uint8

	SessionLimit uint8
}

type SetUserAccessResponse struct {
}

type SetUserPasswordRequest struct {
	// [5:0] - User ID. 000000b = reserved. (User ID 1 is permanently associated with User 1, the null user name).
	UserID uint8

	// The BMC shall maintain an internal tag that indicates whether
	// the password was set as a 16-byte or as a 20-byte password.
	Stored20 bool

	Operation PasswordOperation

	Password string
}

type SetUserPasswordResponse struct {
}

type SetUserPayloadAccessOperation uint8

type SetUserPayloadAccessRequest struct {
	ChannelNumber uint8

	UserID uint8

	Operation SetUserPayloadAccessOperation

	PayloadTypeSOL  bool
	PayloadTypeOEM0 bool
	PayloadTypeOEM1 bool
	PayloadTypeOEM2 bool
	PayloadTypeOEM3 bool
	PayloadTypeOEM4 bool
	PayloadTypeOEM5 bool
	PayloadTypeOEM6 bool
	PayloadTypeOEM7 bool
}

type SetUserPayloadAccessResponse struct {
}

type SetUsernameRequest struct {
	// [5:0] - User ID. 000000b = reserved. (User ID 1 is permanently associated with User 1, the null user name).
	UserID uint8

	// User Name String in ASCII, 16 bytes, max. Strings with fewer than 16
	// characters are terminated with a null (00h) character and 00h padded to 16
	// bytes. When the string is read back using the Get User Name command,
	// those bytes shall be returned as 0s.
	// Here if string length is longer than 16, it would be auto truncated.
	Username string
}

type SetUsernameResponse struct {
}

type SetWatchdogTimerRequest struct {
	DontLog       bool
	DontStopTimer bool
	TimerUse      TimerUse

	PreTimeoutInterrupt   PreTimeoutInterrupt
	TimeoutAction         TimeoutAction
	PreTimeoutIntervalSec uint8

	ExpirationFlags  uint8
	InitialCountdown uint16
}

type SetWatchdogTimerResponse struct {
}

type SystemInterfaceType uint8

type TimeoutAction uint8

type TimerUse uint8

type User struct {
	ID                   uint8
	Name                 string
	Callin               bool
	LinkAuthEnabled      bool
	IPMIMessagingEnabled bool
	MaxPrivLevel         types.PrivilegeLevel
}

type WarmResetRequest struct {
}

type WarmResetResponse struct {
}