c2j

c2j

c2j is the local job-oriented CLI for submitting and running recipe jobs through an SWF runtime.

Use it when you want to:

• submit a recipe job from a named recipe or a local recipe file
• run or continue an existing job
• count and claim available jobs for external scheduling
• run a tenant worker loop with bounded local concurrency
• use the embedded local runtime for fast iteration
• inspect the current cell configuration used for job targeting
• list jobs for a cell

Examples below assume you are running from the repo root.

Command Summary

c2j self
c2j cells
c2j init
c2j version
c2j submit
c2j run
c2j run one
c2j run any
c2j run loop
c2j ready
c2j list
c2j test

Use go run ./cmd/c2j --help or c2j --help to see the full command tree.

Version Information

Use the version subcommand to identify the exact executable you are running:

c2j version

Release builds report the release version injected by the release pipeline. Local go build, go run, and go install builds fall back to Go's embedded VCS metadata, so untagged builds include the current git revision when it is available. Dirty suffixes are only included when Go reports that the worktree was modified at build time.

Quick Start

1. Check current-cell resolution

submit targets the current cell by default. That usually comes from .c2j/config.yaml, but supported project types can also be auto-detected.

Inspect the resolved config:

c2j self

List allowed dependent cells:

c2j cells

Generate a starter config if needed:

c2j init --stdout

If the current directory does not resolve as a cell, either:

• create .c2j/config.yaml, or
• pass --cell <repo-or-path> explicitly to submit or list

2. Submit and run a local recipe file

For local authoring, this is the default loop:

c2j submit \
  --recipe-file ./recipes/my-recipe.yaml \
  --run \
  --embed

That does all of the following:

• loads the local YAML file
• embeds that recipe into the submitted job
• starts an embedded SWF runtime
• submits the job
• immediately executes it

3. Continue or inspect a job later

Find recent jobs for the current cell:

c2j list --self --embed

Continue a submitted job:

c2j run --job-id <job-id> --embed

Current Cell Commands

c2j self

Shows how c2j resolves the current cell from .c2j/config.yaml or supported auto-detection.

c2j self
c2j self --json

Fields include:

• short_name
• repo
• ref
• root_repo
• root_ref
• pattern

c2j cells

Lists dependent cells allowed by the current config.

c2j cells
c2j cells --json

This is mainly useful when you want to target another cell by short name and need to verify how config expands it.

c2j init

Writes a commented .c2j/config.yaml template.

c2j init
c2j init --stdout
c2j init --force

The generated template can derive values from the Go module in the current repo when base: go is appropriate.

Submitting Jobs

Basic forms

Submit a named recipe:

c2j submit --recipe default --embed

--recipe accepts a recipe name or git selector. For local files, prefer --recipe-file.

Submit a local recipe file:

c2j submit --recipe-file ./recipes/my-recipe.yaml --embed

Submit and run immediately:

c2j submit --recipe-file ./recipes/my-recipe.yaml --run --embed

By default, if neither --recipe nor --recipe-file is set, c2j submits the recipe named default.

Passing inputs

Inline JSON:

c2j submit \
  --recipe-file ./recipes/my-recipe.yaml \
  --inputs-json '{"message":"hello"}' \
  --run \
  --embed

Inputs file in JSON or YAML:

c2j submit \
  --recipe-file ./recipes/my-recipe.yaml \
  --inputs-file ./recipes/test-inputs.yaml \
  --run \
  --embed

Positional prompt shortcut:

c2j submit "Summarize the repo" --recipe my-prompt-recipe --embed

The positional argument is merged as inputs.prompt.

Rules:

• --inputs-json and --inputs-file are mutually exclusive
• the positional prompt cannot also be provided as inputs.prompt

Attaching files

Attach local files as job artifacts with repeatable --artifact flags:

c2j submit \
  --recipe-file ./recipes/review-docs.yaml \
  --artifact ./docs/brief.md \
  --artifact requirements=./docs/requirements.md \
  --run \
  --embed

--artifact <path> uses the file basename as the artifact name. --artifact <name>=<path> sets an explicit artifact name.

Recipes bind submitted artifacts into an op inbox explicitly:

sequence:
  - id: inspect
    op: command_execution
    artifacts:
      brief.md: '${{ context.artifacts["brief.md"] }}'
    inputs:
      run: 'cat "${{ context.environment.op.inbox }}/brief.md"'

Choosing the target cell

Use the current cell:

c2j submit --recipe-file ./recipes/my-recipe.yaml --self --embed

Use another cell explicitly:

c2j submit \
  --recipe-file ./recipes/my-recipe.yaml \
  --cell github.com/colony-2/root \
  --embed

--cell accepts:

• a canonical repo string
• a clone URL
• a local repository path
• a configured short name when .c2j/config.yaml defines a pattern

Rules:

• --self and --cell are mutually exclusive
• if no --cell is given, c2j behaves as if you targeted --self

Getting machine-readable output

If you only want the submitted job identity:

c2j submit \
  --recipe-file ./recipes/my-recipe.yaml \
  --json \
  --embed

This emits:

{
  "tenant_id": "0",
  "job_id": "job-...",
  "recipe": "my_recipe_id"
}

Note:

• --json and --run are mutually exclusive

Testing Recipes

c2j test compiles, validates, and runs recipe test suites locally. It does not call the old Colony2 API.

Compile a suite to canonical IR:

c2j test compile \
  --recipe-file ./recipes/my-recipe.yaml \
  --file ./recipes/my-recipe.test.yaml \
  --out ./tmp/compiled-test.json

Run a local suite:

c2j test run \
  --recipe-file ./recipes/my-recipe.yaml \
  --file ./recipes/my-recipe.test.yaml \
  --artifact-mode inline

Run one case:

c2j test case run \
  --recipe-file ./recipes/my-recipe.yaml \
  --file ./recipes/my-recipe.test.yaml \
  --case-id smoke

Useful flags:

• --recipe <name-or-git-selector> targets a current-cell recipe or explicit git selector
• --recipe-file <path> uses a local inline recipe file
• --case <id> filters suite mode to selected cases
• --parallelism <n> controls local case concurrency
• --out-dir <dir> defaults to .c2j/test-results/<timestamp>/
• passthrough cases use a disposable embedded runtime root automatically; use --runtime-root and --keep-runtime only for debugging

Running Jobs

c2j run executes or continues one existing job and prints live story progress to stdout. c2j run one is the explicit form of the same command.

Basic usage:

c2j run --job-id <job-id> --embed
c2j run one --job-id <job-id> --embed

Common variants:

c2j run --job-id <job-id> --wait-timeout 30m --embed
c2j run --job-id <job-id> --input-mode fail --embed
c2j run --job-id <job-id> --ci --embed

Important behavior:

• completed jobs return successfully
• failed jobs return a non-zero exit code
• suspended jobs may wait, prompt, or fail depending on flags
• when input is pending, interactive terminals default to prompting
• in CI or non-terminal mode, input handling defaults to ops

Input handling

--input-mode controls what happens when a job is blocked on user input:

• prompt Prompt on stdin/stdout and submit the response
• ops Emit machine-readable input_required JSON and exit non-zero
• fail Exit immediately when input is required

--ci enables machine-readable input-required behavior without prompting.

Not-ready handling

--on-not-ready controls how run reacts when a job is not runnable yet:

• wait
• fail
• fail-on-lease
• fail-on-pending-jobs
• fail-on-future
• fail-on-missing-capability

With the default wait, run will print waiting: ... lines and poll until the job becomes runnable or the wait timeout is reached.

Exit codes

c2j run uses distinct exit codes:

• 1: general failure or job failure
• 2: wait timeout
• 3: input required
• 4: job not runnable under the selected policy
• 5: invalid job identity or invalid run arguments

Worker Modes

c2j run loop runs a long-lived worker for one tenant. It leases available jobs from an external SWF runtime and executes up to the configured local concurrency.

Basic usage:

c2j run loop --tenant-id <tenant-id> --swf-url http://localhost:9047 --concurrency 4

Important behavior:

• --concurrency <n> controls how many jobs this process can run at once
• --tenant-id defaults the same way as submit, run, and list
• --swf-url must be an external http:// or https:// runtime
• --embed is not available for run loop
• --swf-url embed:/// is rejected for run loop
• run loop is non-interactive; use run or an ops surface for jobs that need input

Loose scheduling with ready and run any

c2j ready prints the number of currently ready recipe jobs for one tenant:

c2j ready --tenant-id <tenant-id> --swf-url http://localhost:9047

c2j run any atomically polls for one available item of recipe work, leases it, runs it, and exits. If no lease is available, it exits successfully after printing no jobs found.

c2j run any --tenant-id <tenant-id> --swf-url http://localhost:9047

These can be composed by an external scheduler:

count=$(c2j ready --tenant-id <tenant-id> --swf-url http://localhost:9047)
if [ "$count" -gt 0 ]; then
  for _ in $(seq 1 "$count"); do
    c2j run any --tenant-id <tenant-id> --swf-url http://localhost:9047 &
  done
  wait
fi

ready is only a non-mutating snapshot and can become stale under competing workers. run any uses SWF polling so finding available work and acquiring the lease happen in one runtime operation.

Listing Jobs

List jobs for the current cell:

c2j list --self --embed

List as JSON:

c2j list --self --json --embed

Filter by status:

c2j list --self --status pending_jobs --status active --embed

List jobs for another cell:

c2j list --cell github.com/colony-2/root --embed

Useful filters:

• --job-id
• --job-type
• --status
• --waiting-for
• --created-after
• --created-before
• --page-size
• --page-token
• --all

Embedded Runtime

--embed is shorthand for:

--swf-url embed:///

Use it when you want a local self-contained runtime instead of an external SWF server.

Behavior:

• starts embedded Postgres and Strata as needed
• uses a persistent runtime root on disk
• works well for local recipe authoring and debugging

Defaults:

• runtime URL: embed:///
• runtime root: ~/.c2j/embed/default

You can override the root with:

export C2J_EMBED_ROOT=/absolute/path/to/embed-root

Notes:

• C2J_EMBED_ROOT must be an absolute path
• only one c2j process can own a given embedded runtime root at a time
• if you need parallel embedded runtimes, give each process a different C2J_EMBED_ROOT

Runtime and Tenant Defaults

c2j reads these environment variables:

• C2J_SWF_URL
• C2J_TENANT_ID
• C2J_EMBED_ROOT

Built-in defaults:

• C2J_SWF_URL: http://localhost:9047
• C2J_TENANT_ID: 0

Examples:

export C2J_SWF_URL=http://localhost:9047
export C2J_TENANT_ID=123

When --embed is present, it overrides C2J_SWF_URL for that command. c2j run loop is the exception: it does not support --embed and rejects C2J_SWF_URL=embed:///.

Common Workflows

Local recipe authoring loop

c2j self
c2j submit --recipe-file ./recipes/my-recipe.yaml --run --embed

Detached submit, then later run

c2j submit --recipe-file ./recipes/my-recipe.yaml --json --embed
c2j run --job-id <job-id> --embed

Run against a remote runtime instead of embed

c2j submit \
  --recipe-file ./recipes/my-recipe.yaml \
  --swf-url http://localhost:9047 \
  --run

Target another cell explicitly

c2j submit \
  --recipe-file ./recipes/my-recipe.yaml \
  --cell github.com/colony-2/root \
  --run \
  --embed

Gotchas

• --recipe and --recipe-file are mutually exclusive
• --json and --run are mutually exclusive on submit
• --inputs-json and --inputs-file are mutually exclusive
• --self and --cell are mutually exclusive
• --artifact names must be unique relative paths; directories are not supported yet
• self, cells, and implicit current-cell submission depend on config or supported auto-detection succeeding
• short cell names require a config pattern; without config, use an explicit repo or path
• --recipe-file is clearer than passing a local file path through --recipe

Related Files

• command entrypoint: main.go
• embedded runtime notes: embed-swf-mode-spec.md
• recipe authoring docs: RECIPE_AUTHORING_GUIDE.md