csi

type CapacityRange struct {
	// Volume MUST be at least this big. This field is OPTIONAL.
	// A value of 0 is equal to an unspecified field value.
	// The value of this field MUST NOT be negative.
	RequiredBytes int64 `protobuf:"varint,1,opt,name=required_bytes,json=requiredBytes,proto3" json:"required_bytes,omitempty"`
	// Volume MUST not be bigger than this. This field is OPTIONAL.
	// A value of 0 is equal to an unspecified field value.
	// The value of this field MUST NOT be negative.
	LimitBytes           int64    `protobuf:"varint,2,opt,name=limit_bytes,json=limitBytes,proto3" json:"limit_bytes,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type ControllerClient interface {
	CreateVolume(ctx context.Context, in *CreateVolumeRequest, opts ...grpc.CallOption) (*CreateVolumeResponse, error)
	DeleteVolume(ctx context.Context, in *DeleteVolumeRequest, opts ...grpc.CallOption) (*DeleteVolumeResponse, error)
	ControllerPublishVolume(ctx context.Context, in *ControllerPublishVolumeRequest, opts ...grpc.CallOption) (*ControllerPublishVolumeResponse, error)
	ControllerUnpublishVolume(ctx context.Context, in *ControllerUnpublishVolumeRequest, opts ...grpc.CallOption) (*ControllerUnpublishVolumeResponse, error)
	ValidateVolumeCapabilities(ctx context.Context, in *ValidateVolumeCapabilitiesRequest, opts ...grpc.CallOption) (*ValidateVolumeCapabilitiesResponse, error)
	ListVolumes(ctx context.Context, in *ListVolumesRequest, opts ...grpc.CallOption) (*ListVolumesResponse, error)
	GetCapacity(ctx context.Context, in *GetCapacityRequest, opts ...grpc.CallOption) (*GetCapacityResponse, error)
	ControllerGetCapabilities(ctx context.Context, in *ControllerGetCapabilitiesRequest, opts ...grpc.CallOption) (*ControllerGetCapabilitiesResponse, error)
	CreateSnapshot(ctx context.Context, in *CreateSnapshotRequest, opts ...grpc.CallOption) (*CreateSnapshotResponse, error)
	DeleteSnapshot(ctx context.Context, in *DeleteSnapshotRequest, opts ...grpc.CallOption) (*DeleteSnapshotResponse, error)
	ListSnapshots(ctx context.Context, in *ListSnapshotsRequest, opts ...grpc.CallOption) (*ListSnapshotsResponse, error)
	ControllerExpandVolume(ctx context.Context, in *ControllerExpandVolumeRequest, opts ...grpc.CallOption) (*ControllerExpandVolumeResponse, error)
	ControllerGetVolume(ctx context.Context, in *ControllerGetVolumeRequest, opts ...grpc.CallOption) (*ControllerGetVolumeResponse, error)
}

type ControllerExpandVolumeRequest struct {
	// The ID of the volume to expand. This field is REQUIRED.
	VolumeId string `protobuf:"bytes,1,opt,name=volume_id,json=volumeId,proto3" json:"volume_id,omitempty"`
	// This allows CO to specify the capacity requirements of the volume
	// after expansion. This field is REQUIRED.
	CapacityRange *CapacityRange `protobuf:"bytes,2,opt,name=capacity_range,json=capacityRange,proto3" json:"capacity_range,omitempty"`
	// Secrets required by the plugin for expanding the volume.
	// This field is OPTIONAL.
	Secrets map[string]string `` /* 155-byte string literal not displayed */
	// Volume capability describing how the CO intends to use this volume.
	// This allows SP to determine if volume is being used as a block
	// device or mounted file system. For example - if volume is
	// being used as a block device - the SP MAY set
	// node_expansion_required to false in ControllerExpandVolumeResponse
	// to skip invocation of NodeExpandVolume on the node by the CO.
	// This is an OPTIONAL field.
	VolumeCapability     *VolumeCapability `protobuf:"bytes,4,opt,name=volume_capability,json=volumeCapability,proto3" json:"volume_capability,omitempty"`
	XXX_NoUnkeyedLiteral struct{}          `json:"-"`
	XXX_unrecognized     []byte            `json:"-"`
	XXX_sizecache        int32             `json:"-"`
}

type ControllerExpandVolumeResponse struct {
	// Capacity of volume after expansion. This field is REQUIRED.
	CapacityBytes int64 `protobuf:"varint,1,opt,name=capacity_bytes,json=capacityBytes,proto3" json:"capacity_bytes,omitempty"`
	// Whether node expansion is required for the volume. When true
	// the CO MUST make NodeExpandVolume RPC call on the node. This field
	// is REQUIRED.
	NodeExpansionRequired bool     `` /* 127-byte string literal not displayed */
	XXX_NoUnkeyedLiteral  struct{} `json:"-"`
	XXX_unrecognized      []byte   `json:"-"`
	XXX_sizecache         int32    `json:"-"`
}

type ControllerGetCapabilitiesRequest struct {
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type ControllerGetCapabilitiesResponse struct {
	// All the capabilities that the controller service supports. This
	// field is OPTIONAL.
	Capabilities         []*ControllerServiceCapability `protobuf:"bytes,1,rep,name=capabilities,proto3" json:"capabilities,omitempty"`
	XXX_NoUnkeyedLiteral struct{}                       `json:"-"`
	XXX_unrecognized     []byte                         `json:"-"`
	XXX_sizecache        int32                          `json:"-"`
}

type ControllerGetVolumeRequest struct {
	// The ID of the volume to fetch current volume information for.
	// This field is REQUIRED.
	VolumeId             string   `protobuf:"bytes,1,opt,name=volume_id,json=volumeId,proto3" json:"volume_id,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type ControllerGetVolumeResponse struct {
	// This field is REQUIRED
	Volume *Volume `protobuf:"bytes,1,opt,name=volume,proto3" json:"volume,omitempty"`
	// This field is REQUIRED.
	Status               *ControllerGetVolumeResponse_VolumeStatus `protobuf:"bytes,2,opt,name=status,proto3" json:"status,omitempty"`
	XXX_NoUnkeyedLiteral struct{}                                  `json:"-"`
	XXX_unrecognized     []byte                                    `json:"-"`
	XXX_sizecache        int32                                     `json:"-"`
}

type ControllerGetVolumeResponse_VolumeStatus struct {
	// A list of all the `node_id` of nodes that this volume is
	// controller published on.
	// This field is OPTIONAL.
	// This field MUST be specified if the LIST_VOLUMES_PUBLISHED_NODES
	// controller capability is supported.
	// published_node_ids MAY include nodes not published to or
	// reported by the SP. The CO MUST be resilient to that.
	PublishedNodeIds []string `protobuf:"bytes,1,rep,name=published_node_ids,json=publishedNodeIds,proto3" json:"published_node_ids,omitempty"`
	// Information about the current condition of the volume.
	// This field is OPTIONAL.
	// This field MUST be specified if the
	// VOLUME_CONDITION controller capability is supported.
	VolumeCondition      *VolumeCondition `protobuf:"bytes,2,opt,name=volume_condition,json=volumeCondition,proto3" json:"volume_condition,omitempty"`
	XXX_NoUnkeyedLiteral struct{}         `json:"-"`
	XXX_unrecognized     []byte           `json:"-"`
	XXX_sizecache        int32            `json:"-"`
}

type ControllerPublishVolumeRequest struct {
	// The ID of the volume to be used on a node.
	// This field is REQUIRED.
	VolumeId string `protobuf:"bytes,1,opt,name=volume_id,json=volumeId,proto3" json:"volume_id,omitempty"`
	// The ID of the node. This field is REQUIRED. The CO SHALL set this
	// field to match the node ID returned by `NodeGetInfo`.
	NodeId string `protobuf:"bytes,2,opt,name=node_id,json=nodeId,proto3" json:"node_id,omitempty"`
	// Volume capability describing how the CO intends to use this volume.
	// SP MUST ensure the CO can use the published volume as described.
	// Otherwise SP MUST return the appropriate gRPC error code.
	// This is a REQUIRED field.
	VolumeCapability *VolumeCapability `protobuf:"bytes,3,opt,name=volume_capability,json=volumeCapability,proto3" json:"volume_capability,omitempty"`
	// Indicates SP MUST publish the volume in readonly mode.
	// CO MUST set this field to false if SP does not have the
	// PUBLISH_READONLY controller capability.
	// This is a REQUIRED field.
	Readonly bool `protobuf:"varint,4,opt,name=readonly,proto3" json:"readonly,omitempty"`
	// Secrets required by plugin to complete controller publish volume
	// request. This field is OPTIONAL. Refer to the
	// `Secrets Requirements` section on how to use this field.
	Secrets map[string]string `` /* 155-byte string literal not displayed */
	// Volume context as returned by SP in
	// CreateVolumeResponse.Volume.volume_context.
	// This field is OPTIONAL and MUST match the volume_context of the
	// volume identified by `volume_id`.
	VolumeContext        map[string]string `` /* 188-byte string literal not displayed */
	XXX_NoUnkeyedLiteral struct{}          `json:"-"`
	XXX_unrecognized     []byte            `json:"-"`
	XXX_sizecache        int32             `json:"-"`
}

type ControllerPublishVolumeResponse struct {
	// Opaque static publish properties of the volume. SP MAY use this
	// field to ensure subsequent `NodeStageVolume` or `NodePublishVolume`
	// calls calls have contextual information.
	// The contents of this field SHALL be opaque to a CO.
	// The contents of this field SHALL NOT be mutable.
	// The contents of this field SHALL be safe for the CO to cache.
	// The contents of this field SHOULD NOT contain sensitive
	// information.
	// The contents of this field SHOULD NOT be used for uniquely
	// identifying a volume. The `volume_id` alone SHOULD be sufficient to
	// identify the volume.
	// This field is OPTIONAL and when present MUST be passed to
	// subsequent `NodeStageVolume` or `NodePublishVolume` calls
	PublishContext       map[string]string `` /* 191-byte string literal not displayed */
	XXX_NoUnkeyedLiteral struct{}          `json:"-"`
	XXX_unrecognized     []byte            `json:"-"`
	XXX_sizecache        int32             `json:"-"`
}

type ControllerServer interface {
	CreateVolume(context.Context, *CreateVolumeRequest) (*CreateVolumeResponse, error)
	DeleteVolume(context.Context, *DeleteVolumeRequest) (*DeleteVolumeResponse, error)
	ControllerPublishVolume(context.Context, *ControllerPublishVolumeRequest) (*ControllerPublishVolumeResponse, error)
	ControllerUnpublishVolume(context.Context, *ControllerUnpublishVolumeRequest) (*ControllerUnpublishVolumeResponse, error)
	ValidateVolumeCapabilities(context.Context, *ValidateVolumeCapabilitiesRequest) (*ValidateVolumeCapabilitiesResponse, error)
	ListVolumes(context.Context, *ListVolumesRequest) (*ListVolumesResponse, error)
	GetCapacity(context.Context, *GetCapacityRequest) (*GetCapacityResponse, error)
	ControllerGetCapabilities(context.Context, *ControllerGetCapabilitiesRequest) (*ControllerGetCapabilitiesResponse, error)
	CreateSnapshot(context.Context, *CreateSnapshotRequest) (*CreateSnapshotResponse, error)
	DeleteSnapshot(context.Context, *DeleteSnapshotRequest) (*DeleteSnapshotResponse, error)
	ListSnapshots(context.Context, *ListSnapshotsRequest) (*ListSnapshotsResponse, error)
	ControllerExpandVolume(context.Context, *ControllerExpandVolumeRequest) (*ControllerExpandVolumeResponse, error)
	ControllerGetVolume(context.Context, *ControllerGetVolumeRequest) (*ControllerGetVolumeResponse, error)
}

type ControllerServiceCapability struct {
	// Types that are valid to be assigned to Type:
	//	*ControllerServiceCapability_Rpc
	Type                 isControllerServiceCapability_Type `protobuf_oneof:"type"`
	XXX_NoUnkeyedLiteral struct{}                           `json:"-"`
	XXX_unrecognized     []byte                             `json:"-"`
	XXX_sizecache        int32                              `json:"-"`
}

type ControllerServiceCapability_RPC struct {
	Type                 ControllerServiceCapability_RPC_Type `protobuf:"varint,1,opt,name=type,proto3,enum=csi.v1.ControllerServiceCapability_RPC_Type" json:"type,omitempty"`
	XXX_NoUnkeyedLiteral struct{}                             `json:"-"`
	XXX_unrecognized     []byte                               `json:"-"`
	XXX_sizecache        int32                                `json:"-"`
}

type ControllerServiceCapability_RPC_Type int32

type ControllerServiceCapability_Rpc struct {
	Rpc *ControllerServiceCapability_RPC `protobuf:"bytes,1,opt,name=rpc,proto3,oneof"`
}

type ControllerUnpublishVolumeRequest struct {
	// The ID of the volume. This field is REQUIRED.
	VolumeId string `protobuf:"bytes,1,opt,name=volume_id,json=volumeId,proto3" json:"volume_id,omitempty"`
	// The ID of the node. This field is OPTIONAL. The CO SHOULD set this
	// field to match the node ID returned by `NodeGetInfo` or leave it
	// unset. If the value is set, the SP MUST unpublish the volume from
	// the specified node. If the value is unset, the SP MUST unpublish
	// the volume from all nodes it is published to.
	NodeId string `protobuf:"bytes,2,opt,name=node_id,json=nodeId,proto3" json:"node_id,omitempty"`
	// Secrets required by plugin to complete controller unpublish volume
	// request. This SHOULD be the same secrets passed to the
	// ControllerPublishVolume call for the specified volume.
	// This field is OPTIONAL. Refer to the `Secrets Requirements`
	// section on how to use this field.
	Secrets              map[string]string `` /* 155-byte string literal not displayed */
	XXX_NoUnkeyedLiteral struct{}          `json:"-"`
	XXX_unrecognized     []byte            `json:"-"`
	XXX_sizecache        int32             `json:"-"`
}

type ControllerUnpublishVolumeResponse struct {
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type CreateSnapshotRequest struct {
	// The ID of the source volume to be snapshotted.
	// This field is REQUIRED.
	SourceVolumeId string `protobuf:"bytes,1,opt,name=source_volume_id,json=sourceVolumeId,proto3" json:"source_volume_id,omitempty"`
	// The suggested name for the snapshot. This field is REQUIRED for
	// idempotency.
	// Any Unicode string that conforms to the length limit is allowed
	// except those containing the following banned characters:
	// U+0000-U+0008, U+000B, U+000C, U+000E-U+001F, U+007F-U+009F.
	// (These are control characters other than commonly used whitespace.)
	Name string `protobuf:"bytes,2,opt,name=name,proto3" json:"name,omitempty"`
	// Secrets required by plugin to complete snapshot creation request.
	// This field is OPTIONAL. Refer to the `Secrets Requirements`
	// section on how to use this field.
	Secrets map[string]string `` /* 155-byte string literal not displayed */
	// Plugin specific parameters passed in as opaque key-value pairs.
	// This field is OPTIONAL. The Plugin is responsible for parsing and
	// validating these parameters. COs will treat these as opaque.
	// Use cases for opaque parameters:
	// - Specify a policy to automatically clean up the snapshot.
	// - Specify an expiration date for the snapshot.
	// - Specify whether the snapshot is readonly or read/write.
	// - Specify if the snapshot should be replicated to some place.
	// - Specify primary or secondary for replication systems that
	//   support snapshotting only on primary.
	Parameters           map[string]string `` /* 161-byte string literal not displayed */
	XXX_NoUnkeyedLiteral struct{}          `json:"-"`
	XXX_unrecognized     []byte            `json:"-"`
	XXX_sizecache        int32             `json:"-"`
}

type CreateSnapshotResponse struct {
	// Contains all attributes of the newly created snapshot that are
	// relevant to the CO along with information required by the Plugin
	// to uniquely identify the snapshot. This field is REQUIRED.
	Snapshot             *Snapshot `protobuf:"bytes,1,opt,name=snapshot,proto3" json:"snapshot,omitempty"`
	XXX_NoUnkeyedLiteral struct{}  `json:"-"`
	XXX_unrecognized     []byte    `json:"-"`
	XXX_sizecache        int32     `json:"-"`
}

type CreateVolumeRequest struct {
	// The suggested name for the storage space. This field is REQUIRED.
	// It serves two purposes:
	// 1) Idempotency - This name is generated by the CO to achieve
	//    idempotency.  The Plugin SHOULD ensure that multiple
	//    `CreateVolume` calls for the same name do not result in more
	//    than one piece of storage provisioned corresponding to that
	//    name. If a Plugin is unable to enforce idempotency, the CO's
	//    error recovery logic could result in multiple (unused) volumes
	//    being provisioned.
	//    In the case of error, the CO MUST handle the gRPC error codes
	//    per the recovery behavior defined in the "CreateVolume Errors"
	//    section below.
	//    The CO is responsible for cleaning up volumes it provisioned
	//    that it no longer needs. If the CO is uncertain whether a volume
	//    was provisioned or not when a `CreateVolume` call fails, the CO
	//    MAY call `CreateVolume` again, with the same name, to ensure the
	//    volume exists and to retrieve the volume's `volume_id` (unless
	//    otherwise prohibited by "CreateVolume Errors").
	// 2) Suggested name - Some storage systems allow callers to specify
	//    an identifier by which to refer to the newly provisioned
	//    storage. If a storage system supports this, it can optionally
	//    use this name as the identifier for the new volume.
	// Any Unicode string that conforms to the length limit is allowed
	// except those containing the following banned characters:
	// U+0000-U+0008, U+000B, U+000C, U+000E-U+001F, U+007F-U+009F.
	// (These are control characters other than commonly used whitespace.)
	Name string `protobuf:"bytes,1,opt,name=name,proto3" json:"name,omitempty"`
	// This field is OPTIONAL. This allows the CO to specify the capacity
	// requirement of the volume to be provisioned. If not specified, the
	// Plugin MAY choose an implementation-defined capacity range. If
	// specified it MUST always be honored, even when creating volumes
	// from a source; which MAY force some backends to internally extend
	// the volume after creating it.
	CapacityRange *CapacityRange `protobuf:"bytes,2,opt,name=capacity_range,json=capacityRange,proto3" json:"capacity_range,omitempty"`
	// The capabilities that the provisioned volume MUST have. SP MUST
	// provision a volume that will satisfy ALL of the capabilities
	// specified in this list. Otherwise SP MUST return the appropriate
	// gRPC error code.
	// The Plugin MUST assume that the CO MAY use the provisioned volume
	// with ANY of the capabilities specified in this list.
	// For example, a CO MAY specify two volume capabilities: one with
	// access mode SINGLE_NODE_WRITER and another with access mode
	// MULTI_NODE_READER_ONLY. In this case, the SP MUST verify that the
	// provisioned volume can be used in either mode.
	// This also enables the CO to do early validation: If ANY of the
	// specified volume capabilities are not supported by the SP, the call
	// MUST return the appropriate gRPC error code.
	// This field is REQUIRED.
	VolumeCapabilities []*VolumeCapability `protobuf:"bytes,3,rep,name=volume_capabilities,json=volumeCapabilities,proto3" json:"volume_capabilities,omitempty"`
	// Plugin specific parameters passed in as opaque key-value pairs.
	// This field is OPTIONAL. The Plugin is responsible for parsing and
	// validating these parameters. COs will treat these as opaque.
	Parameters map[string]string `` /* 161-byte string literal not displayed */
	// Secrets required by plugin to complete volume creation request.
	// This field is OPTIONAL. Refer to the `Secrets Requirements`
	// section on how to use this field.
	Secrets map[string]string `` /* 155-byte string literal not displayed */
	// If specified, the new volume will be pre-populated with data from
	// this source. This field is OPTIONAL.
	VolumeContentSource *VolumeContentSource `protobuf:"bytes,6,opt,name=volume_content_source,json=volumeContentSource,proto3" json:"volume_content_source,omitempty"`
	// Specifies where (regions, zones, racks, etc.) the provisioned
	// volume MUST be accessible from.
	// An SP SHALL advertise the requirements for topological
	// accessibility information in documentation. COs SHALL only specify
	// topological accessibility information supported by the SP.
	// This field is OPTIONAL.
	// This field SHALL NOT be specified unless the SP has the
	// VOLUME_ACCESSIBILITY_CONSTRAINTS plugin capability.
	// If this field is not specified and the SP has the
	// VOLUME_ACCESSIBILITY_CONSTRAINTS plugin capability, the SP MAY
	// choose where the provisioned volume is accessible from.
	AccessibilityRequirements *TopologyRequirement `` /* 136-byte string literal not displayed */
	XXX_NoUnkeyedLiteral      struct{}             `json:"-"`
	XXX_unrecognized          []byte               `json:"-"`
	XXX_sizecache             int32                `json:"-"`
}

type CreateVolumeResponse struct {
	// Contains all attributes of the newly created volume that are
	// relevant to the CO along with information required by the Plugin
	// to uniquely identify the volume. This field is REQUIRED.
	Volume               *Volume  `protobuf:"bytes,1,opt,name=volume,proto3" json:"volume,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type DeleteSnapshotRequest struct {
	// The ID of the snapshot to be deleted.
	// This field is REQUIRED.
	SnapshotId string `protobuf:"bytes,1,opt,name=snapshot_id,json=snapshotId,proto3" json:"snapshot_id,omitempty"`
	// Secrets required by plugin to complete snapshot deletion request.
	// This field is OPTIONAL. Refer to the `Secrets Requirements`
	// section on how to use this field.
	Secrets              map[string]string `` /* 155-byte string literal not displayed */
	XXX_NoUnkeyedLiteral struct{}          `json:"-"`
	XXX_unrecognized     []byte            `json:"-"`
	XXX_sizecache        int32             `json:"-"`
}

type DeleteSnapshotResponse struct {
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type DeleteVolumeRequest struct {
	// The ID of the volume to be deprovisioned.
	// This field is REQUIRED.
	VolumeId string `protobuf:"bytes,1,opt,name=volume_id,json=volumeId,proto3" json:"volume_id,omitempty"`
	// Secrets required by plugin to complete volume deletion request.
	// This field is OPTIONAL. Refer to the `Secrets Requirements`
	// section on how to use this field.
	Secrets              map[string]string `` /* 155-byte string literal not displayed */
	XXX_NoUnkeyedLiteral struct{}          `json:"-"`
	XXX_unrecognized     []byte            `json:"-"`
	XXX_sizecache        int32             `json:"-"`
}

type DeleteVolumeResponse struct {
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type GetCapacityRequest struct {
	// If specified, the Plugin SHALL report the capacity of the storage
	// that can be used to provision volumes that satisfy ALL of the
	// specified `volume_capabilities`. These are the same
	// `volume_capabilities` the CO will use in `CreateVolumeRequest`.
	// This field is OPTIONAL.
	VolumeCapabilities []*VolumeCapability `protobuf:"bytes,1,rep,name=volume_capabilities,json=volumeCapabilities,proto3" json:"volume_capabilities,omitempty"`
	// If specified, the Plugin SHALL report the capacity of the storage
	// that can be used to provision volumes with the given Plugin
	// specific `parameters`. These are the same `parameters` the CO will
	// use in `CreateVolumeRequest`. This field is OPTIONAL.
	Parameters map[string]string `` /* 161-byte string literal not displayed */
	// If specified, the Plugin SHALL report the capacity of the storage
	// that can be used to provision volumes that in the specified
	// `accessible_topology`. This is the same as the
	// `accessible_topology` the CO returns in a `CreateVolumeResponse`.
	// This field is OPTIONAL. This field SHALL NOT be set unless the
	// plugin advertises the VOLUME_ACCESSIBILITY_CONSTRAINTS capability.
	AccessibleTopology   *Topology `protobuf:"bytes,3,opt,name=accessible_topology,json=accessibleTopology,proto3" json:"accessible_topology,omitempty"`
	XXX_NoUnkeyedLiteral struct{}  `json:"-"`
	XXX_unrecognized     []byte    `json:"-"`
	XXX_sizecache        int32     `json:"-"`
}

type GetCapacityResponse struct {
	// The available capacity, in bytes, of the storage that can be used
	// to provision volumes. If `volume_capabilities` or `parameters` is
	// specified in the request, the Plugin SHALL take those into
	// consideration when calculating the available capacity of the
	// storage. This field is REQUIRED.
	// The value of this field MUST NOT be negative.
	AvailableCapacity int64 `protobuf:"varint,1,opt,name=available_capacity,json=availableCapacity,proto3" json:"available_capacity,omitempty"`
	// The largest size that may be used in a
	// CreateVolumeRequest.capacity_range.required_bytes field
	// to create a volume with the same parameters as those in
	// GetCapacityRequest.
	//
	// If `volume_capabilities` or `parameters` is
	// specified in the request, the Plugin SHALL take those into
	// consideration when calculating the minimum volume size of the
	// storage.
	//
	// This field is OPTIONAL. MUST NOT be negative.
	// The Plugin SHOULD provide a value for this field if it has
	// a maximum size for individual volumes and leave it unset
	// otherwise. COs MAY use it to make decision about
	// where to create volumes.
	MaximumVolumeSize *wrappers.Int64Value `protobuf:"bytes,2,opt,name=maximum_volume_size,json=maximumVolumeSize,proto3" json:"maximum_volume_size,omitempty"`
	// The smallest size that may be used in a
	// CreateVolumeRequest.capacity_range.limit_bytes field
	// to create a volume with the same parameters as those in
	// GetCapacityRequest.
	//
	// If `volume_capabilities` or `parameters` is
	// specified in the request, the Plugin SHALL take those into
	// consideration when calculating the maximum volume size of the
	// storage.
	//
	// This field is OPTIONAL. MUST NOT be negative.
	// The Plugin SHOULD provide a value for this field if it has
	// a minimum size for individual volumes and leave it unset
	// otherwise. COs MAY use it to make decision about
	// where to create volumes.
	MinimumVolumeSize    *wrappers.Int64Value `protobuf:"bytes,3,opt,name=minimum_volume_size,json=minimumVolumeSize,proto3" json:"minimum_volume_size,omitempty"`
	XXX_NoUnkeyedLiteral struct{}             `json:"-"`
	XXX_unrecognized     []byte               `json:"-"`
	XXX_sizecache        int32                `json:"-"`
}

type GetPluginCapabilitiesRequest struct {
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type GetPluginCapabilitiesResponse struct {
	// All the capabilities that the controller service supports. This
	// field is OPTIONAL.
	Capabilities         []*PluginCapability `protobuf:"bytes,1,rep,name=capabilities,proto3" json:"capabilities,omitempty"`
	XXX_NoUnkeyedLiteral struct{}            `json:"-"`
	XXX_unrecognized     []byte              `json:"-"`
	XXX_sizecache        int32               `json:"-"`
}

type GetPluginInfoRequest struct {
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type GetPluginInfoResponse struct {
	// The name MUST follow domain name notation format
	// (https://tools.ietf.org/html/rfc1035#section-2.3.1). It SHOULD
	// include the plugin's host company name and the plugin name,
	// to minimize the possibility of collisions. It MUST be 63
	// characters or less, beginning and ending with an alphanumeric
	// character ([a-z0-9A-Z]) with dashes (-), dots (.), and
	// alphanumerics between. This field is REQUIRED.
	Name string `protobuf:"bytes,1,opt,name=name,proto3" json:"name,omitempty"`
	// This field is REQUIRED. Value of this field is opaque to the CO.
	VendorVersion string `protobuf:"bytes,2,opt,name=vendor_version,json=vendorVersion,proto3" json:"vendor_version,omitempty"`
	// This field is OPTIONAL. Values are opaque to the CO.
	Manifest             map[string]string `` /* 157-byte string literal not displayed */
	XXX_NoUnkeyedLiteral struct{}          `json:"-"`
	XXX_unrecognized     []byte            `json:"-"`
	XXX_sizecache        int32             `json:"-"`
}

type IdentityClient interface {
	GetPluginInfo(ctx context.Context, in *GetPluginInfoRequest, opts ...grpc.CallOption) (*GetPluginInfoResponse, error)
	GetPluginCapabilities(ctx context.Context, in *GetPluginCapabilitiesRequest, opts ...grpc.CallOption) (*GetPluginCapabilitiesResponse, error)
	Probe(ctx context.Context, in *ProbeRequest, opts ...grpc.CallOption) (*ProbeResponse, error)
}

type IdentityServer interface {
	GetPluginInfo(context.Context, *GetPluginInfoRequest) (*GetPluginInfoResponse, error)
	GetPluginCapabilities(context.Context, *GetPluginCapabilitiesRequest) (*GetPluginCapabilitiesResponse, error)
	Probe(context.Context, *ProbeRequest) (*ProbeResponse, error)
}

type ListSnapshotsRequest struct {
	// If specified (non-zero value), the Plugin MUST NOT return more
	// entries than this number in the response. If the actual number of
	// entries is more than this number, the Plugin MUST set `next_token`
	// in the response which can be used to get the next page of entries
	// in the subsequent `ListSnapshots` call. This field is OPTIONAL. If
	// not specified (zero value), it means there is no restriction on the
	// number of entries that can be returned.
	// The value of this field MUST NOT be negative.
	MaxEntries int32 `protobuf:"varint,1,opt,name=max_entries,json=maxEntries,proto3" json:"max_entries,omitempty"`
	// A token to specify where to start paginating. Set this field to
	// `next_token` returned by a previous `ListSnapshots` call to get the
	// next page of entries. This field is OPTIONAL.
	// An empty string is equal to an unspecified field value.
	StartingToken string `protobuf:"bytes,2,opt,name=starting_token,json=startingToken,proto3" json:"starting_token,omitempty"`
	// Identity information for the source volume. This field is OPTIONAL.
	// It can be used to list snapshots by volume.
	SourceVolumeId string `protobuf:"bytes,3,opt,name=source_volume_id,json=sourceVolumeId,proto3" json:"source_volume_id,omitempty"`
	// Identity information for a specific snapshot. This field is
	// OPTIONAL. It can be used to list only a specific snapshot.
	// ListSnapshots will return with current snapshot information
	// and will not block if the snapshot is being processed after
	// it is cut.
	SnapshotId string `protobuf:"bytes,4,opt,name=snapshot_id,json=snapshotId,proto3" json:"snapshot_id,omitempty"`
	// Secrets required by plugin to complete ListSnapshot request.
	// This field is OPTIONAL. Refer to the `Secrets Requirements`
	// section on how to use this field.
	Secrets              map[string]string `` /* 155-byte string literal not displayed */
	XXX_NoUnkeyedLiteral struct{}          `json:"-"`
	XXX_unrecognized     []byte            `json:"-"`
	XXX_sizecache        int32             `json:"-"`
}

type ListSnapshotsResponse struct {
	Entries []*ListSnapshotsResponse_Entry `protobuf:"bytes,1,rep,name=entries,proto3" json:"entries,omitempty"`
	// This token allows you to get the next page of entries for
	// `ListSnapshots` request. If the number of entries is larger than
	// `max_entries`, use the `next_token` as a value for the
	// `starting_token` field in the next `ListSnapshots` request. This
	// field is OPTIONAL.
	// An empty string is equal to an unspecified field value.
	NextToken            string   `protobuf:"bytes,2,opt,name=next_token,json=nextToken,proto3" json:"next_token,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type ListSnapshotsResponse_Entry struct {
	Snapshot             *Snapshot `protobuf:"bytes,1,opt,name=snapshot,proto3" json:"snapshot,omitempty"`
	XXX_NoUnkeyedLiteral struct{}  `json:"-"`
	XXX_unrecognized     []byte    `json:"-"`
	XXX_sizecache        int32     `json:"-"`
}

type ListVolumesRequest struct {
	// If specified (non-zero value), the Plugin MUST NOT return more
	// entries than this number in the response. If the actual number of
	// entries is more than this number, the Plugin MUST set `next_token`
	// in the response which can be used to get the next page of entries
	// in the subsequent `ListVolumes` call. This field is OPTIONAL. If
	// not specified (zero value), it means there is no restriction on the
	// number of entries that can be returned.
	// The value of this field MUST NOT be negative.
	MaxEntries int32 `protobuf:"varint,1,opt,name=max_entries,json=maxEntries,proto3" json:"max_entries,omitempty"`
	// A token to specify where to start paginating. Set this field to
	// `next_token` returned by a previous `ListVolumes` call to get the
	// next page of entries. This field is OPTIONAL.
	// An empty string is equal to an unspecified field value.
	StartingToken        string   `protobuf:"bytes,2,opt,name=starting_token,json=startingToken,proto3" json:"starting_token,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type ListVolumesResponse struct {
	Entries []*ListVolumesResponse_Entry `protobuf:"bytes,1,rep,name=entries,proto3" json:"entries,omitempty"`
	// This token allows you to get the next page of entries for
	// `ListVolumes` request. If the number of entries is larger than
	// `max_entries`, use the `next_token` as a value for the
	// `starting_token` field in the next `ListVolumes` request. This
	// field is OPTIONAL.
	// An empty string is equal to an unspecified field value.
	NextToken            string   `protobuf:"bytes,2,opt,name=next_token,json=nextToken,proto3" json:"next_token,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type ListVolumesResponse_Entry struct {
	// This field is REQUIRED
	Volume *Volume `protobuf:"bytes,1,opt,name=volume,proto3" json:"volume,omitempty"`
	// This field is OPTIONAL. This field MUST be specified if the
	// LIST_VOLUMES_PUBLISHED_NODES controller capability is
	// supported.
	Status               *ListVolumesResponse_VolumeStatus `protobuf:"bytes,2,opt,name=status,proto3" json:"status,omitempty"`
	XXX_NoUnkeyedLiteral struct{}                          `json:"-"`
	XXX_unrecognized     []byte                            `json:"-"`
	XXX_sizecache        int32                             `json:"-"`
}