config

type Config struct {

	// SetOptions contains a subset of config options. It's used to indicate if
	// a given option has either been set by the user or by a parsed libpod
	// configuration file.  If not, the corresponding option might be
	// overwritten by values from the database.  This behavior guarantess
	// backwards compat with older version of libpod and Podman.
	SetOptions

	// StateType is the type of the backing state store. Avoid using multiple
	// values for this with the same containers/storage configuration on the
	// same system. Different state types do not interact, and each will see a
	// separate set of containers, which may cause conflicts in
	// containers/storage. As such this is not exposed via the config file.
	StateType define.RuntimeStateStore `toml:"-"`

	// StorageConfig is the configuration used by containers/storage Not
	// included in the on-disk config, use the dedicated containers/storage
	// configuration file instead.
	StorageConfig storage.StoreOptions `toml:"-"`

	// VolumePath is the default location that named volumes will be created
	// under. This convention is followed by the default volume driver, but
	// may not be by other drivers.
	VolumePath string `toml:"volume_path"`

	// ImageDefaultTransport is the default transport method used to fetch
	// images.
	ImageDefaultTransport string `toml:"image_default_transport"`

	// SignaturePolicyPath is the path to a signature policy to use for
	// validating images. If left empty, the containers/image default signature
	// policy will be used.
	SignaturePolicyPath string `toml:"signature_policy_path,omitempty"`

	// OCIRuntime is the OCI runtime to use.
	OCIRuntime string `toml:"runtime"`

	// OCIRuntimes are the set of configured OCI runtimes (default is runc).
	OCIRuntimes map[string][]string `toml:"runtimes"`

	// RuntimeSupportsJSON is the list of the OCI runtimes that support
	// --format=json.
	RuntimeSupportsJSON []string `toml:"runtime_supports_json"`

	// RuntimeSupportsNoCgroups is a list of OCI runtimes that support
	// running containers without CGroups.
	RuntimeSupportsNoCgroups []string `toml:"runtime_supports_nocgroups"`

	// RuntimePath is the path to OCI runtime binary for launching containers.
	// The first path pointing to a valid file will be used This is used only
	// when there are no OCIRuntime/OCIRuntimes defined.  It is used only to be
	// backward compatible with older versions of Podman.
	RuntimePath []string `toml:"runtime_path"`

	// ConmonPath is the path to the Conmon binary used for managing containers.
	// The first path pointing to a valid file will be used.
	ConmonPath []string `toml:"conmon_path"`

	// ConmonEnvVars are environment variables to pass to the Conmon binary
	// when it is launched.
	ConmonEnvVars []string `toml:"conmon_env_vars"`

	// CGroupManager is the CGroup Manager to use Valid values are "cgroupfs"
	// and "systemd".
	CgroupManager string `toml:"cgroup_manager"`

	// InitPath is the path to the container-init binary.
	InitPath string `toml:"init_path"`

	// StaticDir is the path to a persistent directory to store container
	// files.
	StaticDir string `toml:"static_dir"`

	// TmpDir is the path to a temporary directory to store per-boot container
	// files. Must be stored in a tmpfs.
	TmpDir string `toml:"tmp_dir"`

	// MaxLogSize is the maximum size of container logfiles.
	MaxLogSize int64 `toml:"max_log_size,omitempty"`

	// NoPivotRoot sets whether to set no-pivot-root in the OCI runtime.
	NoPivotRoot bool `toml:"no_pivot_root"`

	// CNIConfigDir sets the directory where CNI configuration files are
	// stored.
	CNIConfigDir string `toml:"cni_config_dir"`

	// CNIPluginDir sets a number of directories where the CNI network
	// plugins can be located.
	CNIPluginDir []string `toml:"cni_plugin_dir"`

	// CNIDefaultNetwork is the network name of the default CNI network
	// to attach pods to.
	CNIDefaultNetwork string `toml:"cni_default_network,omitempty"`

	// HooksDir holds paths to the directories containing hooks
	// configuration files. When the same filename is present in in
	// multiple directories, the file in the directory listed last in
	// this slice takes precedence.
	HooksDir []string `toml:"hooks_dir"`

	// DefaultMountsFile is the path to the default mounts file for testing
	// purposes only.
	DefaultMountsFile string `toml:"-"`

	// Namespace is the libpod namespace to use. Namespaces are used to create
	// scopes to separate containers and pods in the state. When namespace is
	// set, libpod will only view containers and pods in the same namespace. All
	// containers and pods created will default to the namespace set here. A
	// namespace of "", the empty string, is equivalent to no namespace, and all
	// containers and pods will be visible. The default namespace is "".
	Namespace string `toml:"namespace,omitempty"`

	// InfraImage is the image a pod infra container will use to manage
	// namespaces.
	InfraImage string `toml:"infra_image"`

	// InfraCommand is the command run to start up a pod infra container.
	InfraCommand string `toml:"infra_command"`

	// EnablePortReservation determines whether libpod will reserve ports on the
	// host when they are forwarded to containers. When enabled, when ports are
	// forwarded to containers, they are held open by conmon as long as the
	// container is running, ensuring that they cannot be reused by other
	// programs on the host. However, this can cause significant memory usage if
	// a container has many ports forwarded to it. Disabling this can save
	// memory.
	EnablePortReservation bool `toml:"enable_port_reservation"`

	// EnableLabeling indicates whether libpod will support container labeling.
	EnableLabeling bool `toml:"label"`

	// NetworkCmdPath is the path to the slirp4netns binary.
	NetworkCmdPath string `toml:"network_cmd_path"`

	// NumLocks is the number of locks to make available for containers and
	// pods.
	NumLocks uint32 `toml:"num_locks,omitempty"`

	// LockType is the type of locking to use.
	LockType string `toml:"lock_type,omitempty"`

	// EventsLogger determines where events should be logged.
	EventsLogger string `toml:"events_logger"`

	// EventsLogFilePath is where the events log is stored.
	EventsLogFilePath string `toml:"events_logfile_path"`

	//DetachKeys is the sequence of keys used to detach a container.
	DetachKeys string `toml:"detach_keys"`

	// SDNotify tells Libpod to allow containers to notify the host systemd of
	// readiness using the SD_NOTIFY mechanism.
	SDNotify bool
}

type DBConfig struct {
	LibpodRoot  string
	LibpodTmp   string
	StorageRoot string
	StorageTmp  string
	GraphDriver string
	VolumePath  string
}

type SetOptions struct {
	// StorageConfigRunRootSet indicates if the RunRoot has been explicitly set
	// by the config or by the user. It's required to guarantee backwards
	// compatibility with older versions of libpod for which we must query the
	// database configuration. Not included in the on-disk config.
	StorageConfigRunRootSet bool `toml:"-"`

	// StorageConfigGraphRootSet indicates if the RunRoot has been explicitly
	// set by the config or by the user. It's required to guarantee backwards
	// compatibility with older versions of libpod for which we must query the
	// database configuration. Not included in the on-disk config.
	StorageConfigGraphRootSet bool `toml:"-"`

	// StorageConfigGraphDriverNameSet indicates if the GraphDriverName has been
	// explicitly set by the config or by the user. It's required to guarantee
	// backwards compatibility with older versions of libpod for which we must
	// query the database configuration. Not included in the on-disk config.
	StorageConfigGraphDriverNameSet bool `toml:"-"`

	// VolumePathSet indicates if the VolumePath has been explicitly set by the
	// config or by the user. It's required to guarantee backwards compatibility
	// with older versions of libpod for which we must query the database
	// configuration. Not included in the on-disk config.
	VolumePathSet bool `toml:"-"`

	// StaticDirSet indicates if the StaticDir has been explicitly set by the
	// config or by the user. It's required to guarantee backwards compatibility
	// with older versions of libpod for which we must query the database
	// configuration. Not included in the on-disk config.
	StaticDirSet bool `toml:"-"`

	// TmpDirSet indicates if the TmpDir has been explicitly set by the config
	// or by the user. It's required to guarantee backwards compatibility with
	// older versions of libpod for which we must query the database
	// configuration. Not included in the on-disk config.
	TmpDirSet bool `toml:"-"`
}