pico2/

Details

Valid go.mod file
Redistributable license
Tagged version
Stable version
Learn more about best practices

Repository

Links

Open Source Insights

Directories ¶

?	: This menu
/	: Search site
f or F	: Jump to
y or Y	: Canonical URL

Path	Synopsis
board
leds
pins
pwr
examples
blinky command Blinky flashes the on-board LED.	Blinky flashes the on-board LED.
blinky1 command Blinky flashes the on-board LED.	Blinky flashes the on-board LED.
crudeblinky command Crudeblinky flashes the on-board LED without using HAL.	Crudeblinky flashes the on-board LED without using HAL.
cytron-maker command
display command Display draws on the connected display.	Display draws on the connected display.
dma command Dma shows how to use the DMA controller for RAM to RAM transfers.	Dma shows how to use the DMA controller for RAM to RAM transfers.
gpiotest command Gpiotest tests all GPIOs exposed as the Pico 2 GPIO pins.	Gpiotest tests all GPIOs exposed as the Pico 2 GPIO pins.
irqpin command Irqpin shows how to setup an IO pin to be an interrupt source.	Irqpin shows how to setup an IO pin to be an interrupt source.
readpin command Readpin polls the state of the GP15 pin and shows it using the onboard LED.	Readpin polls the state of the GP15 pin and shows it using the onboard LED.
smpblinky command Smpblinky tests the Go and noos schedulers.	Smpblinky tests the Go and noos schedulers.
spi command SPI loop test: wire GP3 and GP4 together.	SPI loop test: wire GP3 and GP4 together.
spotpear-pico-1.54inch-lcd command Pico-lcd-1.3 is similar to the Waveshare demo code for this module.	Pico-lcd-1.3 is similar to the Waveshare demo code for this module.
uart command Uart allows to tests the communication over UART peripheral.	Uart allows to tests the communication over UART peripheral.
w5500 command W5500 tests the communication with the WIZnet W5500 TCP/IP Ethernet controller.	W5500 tests the communication with the WIZnet W5500 TCP/IP Ethernet controller.
waveshare-pico-8seg-led command Pico-8seg-led uses standard fmt.Fprintf function to prints different chars and numbers on the 8-segment display.	Pico-8seg-led uses standard fmt.Fprintf function to prints different chars and numbers on the 8-segment display.
waveshare-pico-lcd-1.3 command Pico-lcd-1.3 is similar to the Waveshare demo code for this module.	Pico-lcd-1.3 is similar to the Waveshare demo code for this module.
waveshare-pico-restouch-lcd-2.8 command Pico-restouch-lcd-2.8 allows to test the LCD module.	Pico-restouch-lcd-2.8 allows to test the LCD module.
ws2812 command WS2812 uses the UART peripheral to drive the string of the WS2812 RGB LEDs.	WS2812 uses the UART peripheral to drive the string of the WS2812 RGB LEDs.
module
cytron/maker/buttons
spotpear/pico-1.54inch-lcd/buttons
spotpear/pico-1.54inch-lcd/lcd
waveshare/pico-8seg-led/segled
waveshare/pico-lcd-1.3/buttons
waveshare/pico-lcd-1.3/lcd
waveshare/pico-restouch-lcd-2.8/lcd