envoy_api_v2_cluster

type CircuitBreakers struct {

	// If multiple :ref:`Thresholds<envoy_api_msg_cluster.CircuitBreakers.Thresholds>`
	// are defined with the same :ref:`RoutingPriority<envoy_api_enum_core.RoutingPriority>`,
	// the first one in the list is used. If no Thresholds is defined for a given
	// :ref:`RoutingPriority<envoy_api_enum_core.RoutingPriority>`, the default values
	// are used.
	Thresholds []*CircuitBreakers_Thresholds `protobuf:"bytes,1,rep,name=thresholds,proto3" json:"thresholds,omitempty"`
	// contains filtered or unexported fields
}

type CircuitBreakersValidationError struct {
	// contains filtered or unexported fields
}

type CircuitBreakers_Thresholds struct {

	// The :ref:`RoutingPriority<envoy_api_enum_core.RoutingPriority>`
	// the specified CircuitBreaker settings apply to.
	Priority core.RoutingPriority `protobuf:"varint,1,opt,name=priority,proto3,enum=envoy.api.v2.core.RoutingPriority" json:"priority,omitempty"`
	// The maximum number of connections that Envoy will make to the upstream
	// cluster. If not specified, the default is 1024.
	MaxConnections *wrappers.UInt32Value `protobuf:"bytes,2,opt,name=max_connections,json=maxConnections,proto3" json:"max_connections,omitempty"`
	// The maximum number of pending requests that Envoy will allow to the
	// upstream cluster. If not specified, the default is 1024.
	MaxPendingRequests *wrappers.UInt32Value `protobuf:"bytes,3,opt,name=max_pending_requests,json=maxPendingRequests,proto3" json:"max_pending_requests,omitempty"`
	// The maximum number of parallel requests that Envoy will make to the
	// upstream cluster. If not specified, the default is 1024.
	MaxRequests *wrappers.UInt32Value `protobuf:"bytes,4,opt,name=max_requests,json=maxRequests,proto3" json:"max_requests,omitempty"`
	// The maximum number of parallel retries that Envoy will allow to the
	// upstream cluster. If not specified, the default is 3.
	MaxRetries *wrappers.UInt32Value `protobuf:"bytes,5,opt,name=max_retries,json=maxRetries,proto3" json:"max_retries,omitempty"`
	// Specifies a limit on concurrent retries in relation to the number of active requests. This
	// parameter is optional.
	//
	// .. note::
	//
	//    If this field is set, the retry budget will override any configured retry circuit
	//    breaker.
	RetryBudget *CircuitBreakers_Thresholds_RetryBudget `protobuf:"bytes,8,opt,name=retry_budget,json=retryBudget,proto3" json:"retry_budget,omitempty"`
	// If track_remaining is true, then stats will be published that expose
	// the number of resources remaining until the circuit breakers open. If
	// not specified, the default is false.
	//
	// .. note::
	//
	//    If a retry budget is used in lieu of the max_retries circuit breaker,
	//    the remaining retry resources remaining will not be tracked.
	TrackRemaining bool `protobuf:"varint,6,opt,name=track_remaining,json=trackRemaining,proto3" json:"track_remaining,omitempty"`
	// The maximum number of connection pools per cluster that Envoy will concurrently support at
	// once. If not specified, the default is unlimited. Set this for clusters which create a
	// large number of connection pools. See
	// :ref:`Circuit Breaking <arch_overview_circuit_break_cluster_maximum_connection_pools>` for
	// more details.
	MaxConnectionPools *wrappers.UInt32Value `protobuf:"bytes,7,opt,name=max_connection_pools,json=maxConnectionPools,proto3" json:"max_connection_pools,omitempty"`
	// contains filtered or unexported fields
}

type CircuitBreakers_ThresholdsValidationError struct {
	// contains filtered or unexported fields
}

type CircuitBreakers_Thresholds_RetryBudget struct {

	// Specifies the limit on concurrent retries as a percentage of the sum of active requests and
	// active pending requests. For example, if there are 100 active requests and the
	// budget_percent is set to 25, there may be 25 active retries.
	//
	// This parameter is optional. Defaults to 20%.
	BudgetPercent *_type.Percent `protobuf:"bytes,1,opt,name=budget_percent,json=budgetPercent,proto3" json:"budget_percent,omitempty"`
	// Specifies the minimum retry concurrency allowed for the retry budget. The limit on the
	// number of active retries may never go below this number.
	//
	// This parameter is optional. Defaults to 3.
	MinRetryConcurrency *wrappers.UInt32Value `protobuf:"bytes,2,opt,name=min_retry_concurrency,json=minRetryConcurrency,proto3" json:"min_retry_concurrency,omitempty"`
	// contains filtered or unexported fields
}

type CircuitBreakers_Thresholds_RetryBudgetValidationError struct {
	// contains filtered or unexported fields
}

type Filter struct {

	// The name of the filter to instantiate. The name must match a
	// :ref:`supported filter <config_network_filters>`.
	Name string `protobuf:"bytes,1,opt,name=name,proto3" json:"name,omitempty"`
	// Filter specific configuration which depends on the filter being
	// instantiated. See the supported filters for further documentation.
	TypedConfig *any.Any `protobuf:"bytes,2,opt,name=typed_config,json=typedConfig,proto3" json:"typed_config,omitempty"`
	// contains filtered or unexported fields
}

type FilterValidationError struct {
	// contains filtered or unexported fields
}

type OutlierDetection struct {

	// The number of consecutive 5xx responses or local origin errors that are mapped
	// to 5xx error codes before a consecutive 5xx ejection
	// occurs. Defaults to 5.
	Consecutive_5Xx *wrappers.UInt32Value `protobuf:"bytes,1,opt,name=consecutive_5xx,json=consecutive5xx,proto3" json:"consecutive_5xx,omitempty"`
	// The time interval between ejection analysis sweeps. This can result in
	// both new ejections as well as hosts being returned to service. Defaults
	// to 10000ms or 10s.
	Interval *duration.Duration `protobuf:"bytes,2,opt,name=interval,proto3" json:"interval,omitempty"`
	// The base time that a host is ejected for. The real time is equal to the
	// base time multiplied by the number of times the host has been ejected.
	// Defaults to 30000ms or 30s.
	BaseEjectionTime *duration.Duration `protobuf:"bytes,3,opt,name=base_ejection_time,json=baseEjectionTime,proto3" json:"base_ejection_time,omitempty"`
	// The maximum % of an upstream cluster that can be ejected due to outlier
	// detection. Defaults to 10% but will eject at least one host regardless of the value.
	MaxEjectionPercent *wrappers.UInt32Value `protobuf:"bytes,4,opt,name=max_ejection_percent,json=maxEjectionPercent,proto3" json:"max_ejection_percent,omitempty"`
	// The % chance that a host will be actually ejected when an outlier status
	// is detected through consecutive 5xx. This setting can be used to disable
	// ejection or to ramp it up slowly. Defaults to 100.
	EnforcingConsecutive_5Xx *wrappers.UInt32Value `` /* 132-byte string literal not displayed */
	// The % chance that a host will be actually ejected when an outlier status
	// is detected through success rate statistics. This setting can be used to
	// disable ejection or to ramp it up slowly. Defaults to 100.
	EnforcingSuccessRate *wrappers.UInt32Value `protobuf:"bytes,6,opt,name=enforcing_success_rate,json=enforcingSuccessRate,proto3" json:"enforcing_success_rate,omitempty"`
	// The number of hosts in a cluster that must have enough request volume to
	// detect success rate outliers. If the number of hosts is less than this
	// setting, outlier detection via success rate statistics is not performed
	// for any host in the cluster. Defaults to 5.
	SuccessRateMinimumHosts *wrappers.UInt32Value `` /* 134-byte string literal not displayed */
	// The minimum number of total requests that must be collected in one
	// interval (as defined by the interval duration above) to include this host
	// in success rate based outlier detection. If the volume is lower than this
	// setting, outlier detection via success rate statistics is not performed
	// for that host. Defaults to 100.
	SuccessRateRequestVolume *wrappers.UInt32Value `` /* 137-byte string literal not displayed */
	// This factor is used to determine the ejection threshold for success rate
	// outlier ejection. The ejection threshold is the difference between the
	// mean success rate, and the product of this factor and the standard
	// deviation of the mean success rate: mean - (stdev *
	// success_rate_stdev_factor). This factor is divided by a thousand to get a
	// double. That is, if the desired factor is 1.9, the runtime value should
	// be 1900. Defaults to 1900.
	SuccessRateStdevFactor *wrappers.UInt32Value `` /* 131-byte string literal not displayed */
	// The number of consecutive gateway failures (502, 503, 504 status codes)
	// before a consecutive gateway failure ejection occurs. Defaults to 5.
	ConsecutiveGatewayFailure *wrappers.UInt32Value `` /* 139-byte string literal not displayed */
	// The % chance that a host will be actually ejected when an outlier status
	// is detected through consecutive gateway failures. This setting can be
	// used to disable ejection or to ramp it up slowly. Defaults to 0.
	EnforcingConsecutiveGatewayFailure *wrappers.UInt32Value `` /* 168-byte string literal not displayed */
	// Determines whether to distinguish local origin failures from external errors. If set to true
	// the following configuration parameters are taken into account:
	// :ref:`consecutive_local_origin_failure<envoy_api_field_cluster.OutlierDetection.consecutive_local_origin_failure>`,
	// :ref:`enforcing_consecutive_local_origin_failure<envoy_api_field_cluster.OutlierDetection.enforcing_consecutive_local_origin_failure>`
	// and
	// :ref:`enforcing_local_origin_success_rate<envoy_api_field_cluster.OutlierDetection.enforcing_local_origin_success_rate>`.
	// Defaults to false.
	SplitExternalLocalOriginErrors bool `` /* 159-byte string literal not displayed */
	// The number of consecutive locally originated failures before ejection
	// occurs. Defaults to 5. Parameter takes effect only when
	// :ref:`split_external_local_origin_errors<envoy_api_field_cluster.OutlierDetection.split_external_local_origin_errors>`
	// is set to true.
	ConsecutiveLocalOriginFailure *wrappers.UInt32Value `` /* 153-byte string literal not displayed */
	// The % chance that a host will be actually ejected when an outlier status
	// is detected through consecutive locally originated failures. This setting can be
	// used to disable ejection or to ramp it up slowly. Defaults to 100.
	// Parameter takes effect only when
	// :ref:`split_external_local_origin_errors<envoy_api_field_cluster.OutlierDetection.split_external_local_origin_errors>`
	// is set to true.
	EnforcingConsecutiveLocalOriginFailure *wrappers.UInt32Value `` /* 182-byte string literal not displayed */
	// The % chance that a host will be actually ejected when an outlier status
	// is detected through success rate statistics for locally originated errors.
	// This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100.
	// Parameter takes effect only when
	// :ref:`split_external_local_origin_errors<envoy_api_field_cluster.OutlierDetection.split_external_local_origin_errors>`
	// is set to true.
	EnforcingLocalOriginSuccessRate *wrappers.UInt32Value `` /* 161-byte string literal not displayed */
	// The failure percentage to use when determining failure percentage-based outlier detection. If
	// the failure percentage of a given host is greater than or equal to this value, it will be
	// ejected. Defaults to 85.
	FailurePercentageThreshold *wrappers.UInt32Value `` /* 142-byte string literal not displayed */
	// The % chance that a host will be actually ejected when an outlier status is detected through
	// failure percentage statistics. This setting can be used to disable ejection or to ramp it up
	// slowly. Defaults to 0.
	//
	// [#next-major-version: setting this without setting failure_percentage_threshold should be
	// invalid in v4.]
	EnforcingFailurePercentage *wrappers.UInt32Value `` /* 142-byte string literal not displayed */
	// The % chance that a host will be actually ejected when an outlier status is detected through
	// local-origin failure percentage statistics. This setting can be used to disable ejection or to
	// ramp it up slowly. Defaults to 0.
	EnforcingFailurePercentageLocalOrigin *wrappers.UInt32Value `` /* 179-byte string literal not displayed */
	// The minimum number of hosts in a cluster in order to perform failure percentage-based ejection.
	// If the total number of hosts in the cluster is less than this value, failure percentage-based
	// ejection will not be performed. Defaults to 5.
	FailurePercentageMinimumHosts *wrappers.UInt32Value `` /* 153-byte string literal not displayed */
	// The minimum number of total requests that must be collected in one interval (as defined by the
	// interval duration above) to perform failure percentage-based ejection for this host. If the
	// volume is lower than this setting, failure percentage-based ejection will not be performed for
	// this host. Defaults to 50.
	FailurePercentageRequestVolume *wrappers.UInt32Value `` /* 156-byte string literal not displayed */
	// contains filtered or unexported fields
}

type OutlierDetectionValidationError struct {
	// contains filtered or unexported fields
}