driverkit

driverkit

Status: Under development

A command line tool that can be used to build the Falco kernel module and eBPF probe.

Usage

When you meet kernelversion that refers to the version you get executing uname -v:

For example, below, the version is the 59 after the hash

uname -v
#59-Ubuntu SMP Wed Dec 4 10:02:00 UTC 2019

When you meet kernelrelease, that refers to the kernel release you get executing uname -r:

uname -r
4.15.0-1057-aws

Against a Kubernetes cluster

driverkit kubernetes --output-module /tmp/falco.ko --kernelversion=81 --kernelrelease=4.15.0-72-generic --driverversion=master --target=ubuntu-generic

Against a Docker daemon

driverkit docker --output-module /tmp/falco.ko --kernelversion=81 --kernelrelease=4.15.0-72-generic --driverversion=master --target=ubuntu-generic

Build using a configuration file

Create a file named ubuntu-aws.yaml containing the following content:

kernelrelease: 4.15.0-1057-aws
kernelversion: 59
target: ubuntu-aws
output:
  module: /tmp/falco-ubuntu-aws.ko
  probe: /tmp/falco-ubuntu-aws.o
driverversion: master

Now run driverkit using the configuration file:

driverkit docker -c ubuntu-aws.yaml

Configure the kernel module name

It is possible to customize the kernel module name that is produced by Driverkit with the moduledevicename and moduledrivername options. In this context, the device name is the prefix used for the devices in /dev/, while the driver name is the kernel module name as reported by modinfo or lsmod once the module is loaded.

Supported architectures

At the moment, driverkit supports:

• amd64 (x86_64)
• arm64 (aarch64)

The architecture is taken from runtime environment, but it can be overridden through architecture config.
Driverkit also supports cross building for arm64 using qemu from an x86_64 host.

Note: we could not automatically fetch correct architecture because some kernel names do not have the -$arch, namely Ubuntu ones.

Supported targets

ubuntu-generic

Example configuration file to build both the Kernel module and eBPF probe for Ubuntu generic.

kernelrelease: 4.15.0-72-generic
kernelversion: 81
target: ubuntu-generic
output:
  module: /tmp/falco-ubuntu-generic.ko
  probe: /tmp/falco-ubuntu-generic.o
driverversion: master

ubuntu-aws

Example configuration file to build both the Kernel module and eBPF probe for Ubuntu AWS.

kernelrelease: 4.15.0-1057-aws
kernelversion: 59
target: ubuntu-aws
output:
  module: /tmp/falco-ubuntu-aws.ko
  probe: /tmp/falco-ubuntu-aws.o
driverversion: master

centos 6

kernelrelease: 2.6.32-754.14.2.el6.x86_64
kernelversion: 1
target: centos
output:
  module: /tmp/falco-centos6.ko
driverversion: master

centos 7

kernelrelease: 3.10.0-957.12.2.el7.x86_64
kernelversion: 1
target: centos
output:
  module: /tmp/falco-centos7.ko
driverversion: master

centos 8

kernelrelease: 4.18.0-147.5.1.el8_1.x86_64
kernelversion: 1
target: centos
output:
  module: /tmp/falco-centos8.ko
driverversion: master

amazonlinux

kernelrelease: 4.14.26-46.32.amzn1.x86_64
target: amazonlinux
output:
    module: /tmp/falco_amazonlinux_4.14.26-46.32.amzn1.x86_64.ko
driverversion: be1ea2d9482d0e6e2cb14a0fd7e08cbecf517f94

amazonlinux 2

kernelrelease: 4.14.171-136.231.amzn2.x86_64
target: amazonlinux2
output:
    module: /tmp/falco_amazonlinux2_4.14.171-136.231.amzn2.x86_64.ko
    probe: /tmp/falco_amazonlinux2_4.14.171-136.231.amzn2.x86_64.o
driverversion: be1ea2d9482d0e6e2cb14a0fd7e08cbecf517f94

debian

Example configuration file to build both the Kernel module and eBPF probe for Debian.

kernelrelease: 4.19.0-6-amd64
kernelversion: 1
output:
  module: /tmp/falco-debian.ko
  probe: /tmp/falco-debian.o
target: debian
driverversion: master

flatcar

Example configuration file to build both the Kernel module and eBPF probe for Flatcar. The Flatcar release version needs to be provided in the kernelrelease field instead of the kernel version.

kernelrelease: 3185.0.0
target: flatcar
output:
  module: /tmp/falco-flatcar-3185.0.0.ko
  probe: /tmp/falco-flatcar-3185.0.0.o
driverversion: master

redhat 7

kernelrelease: 3.10.0-1160.66.1.el7.x86_64
target: redhat
output:
  module: /tmp/falco-redhat7.ko
driverversion: master
builderimage: registry.redhat.io/rhel7:rhel7_driverkit

The image used for this build was created with the following command:

docker build --build-arg rh_username=<username> --build-arg rh_password=<password> -t registry.redhat.io/rhel7:rhel7_driverkit -f Dockerfile.rhel7 .

and Dockerfile.rhel7:

FROM registry.redhat.io/rhel7

ARG rh_username
ARG rh_password

RUN subscription-manager register --username $rh_username --password $rh_password --auto-attach

RUN yum install gcc elfutils-libelf-devel make -y

redhat 8

kernelrelease: 4.18.0-372.9.1.el8.x86_64
target: redhat
output:
  module: /tmp/falco-redhat8.ko
  probe: /tmp/falco-redhat8.o
driverversion: master
builderimage: redhat/ubi8:rhel8_driverkit

The image used for this build was created with the following command:

docker build --build-arg rh_username=<username> --build-arg rh_password=<password> -t redhat/ubi8:rhel8_driverkit -f Dockerfile.rhel8 .

and Dockerfile.rhel8:

FROM redhat/ubi8

ARG rh_username
ARG rh_password

RUN subscription-manager register --username $rh_username --password $rh_password --auto-attach

RUN yum install gcc curl elfutils-libelf-devel kmod make \
                llvm-toolset-0:12.0.1-1.module+el8.5.0+11871+08d0eab5.x86_64 cpio -y

redhat 9

kernelrelease: 5.14.0-70.13.1.el9_0.x86_64
target: redhat
output:
  module: /tmp/falco-redhat9.ko
  probe: /tmp/falco-redhat9.o
driverversion: master
builderimage: docker.io/redhat/ubi9:rhel9_driverkit

The image used for this build was created with the following command:

docker build -t docker.io/redhat/ubi9:rhel9_driverkit -f Dockerfile.rhel9 .

and Dockerfile.rhel9:

FROM docker.io/redhat/ubi9

RUN yum install gcc elfutils-libelf-devel kmod make cpio llvm-toolset -y

vanilla

In case of vanilla, you also need to pass the kernel config data in base64 format.

In most systems you can get kernelconfigdata by reading /proc/config.gz.

kernelrelease: 5.5.2
kernelversion: 1
target: vanilla
output:
  module: /tmp/falco-vanilla.ko
  probe: /tmp/falco-vanilla.o
driverversion: 0de226085cc4603c45ebb6883ca4cacae0bd25b2

Now you can add the kernelconfigdata to the configuration file, to do so:

zcat /proc/config.gz| base64 -w0 | awk '{print "kernelconfigdata: " $1;}' >> /tmp/vanilla.yaml

The command above assumes that you saved the configuration file at /tmp/vanilla.yaml

Note

Usually, building for a vanilla target requires more time.

So, we suggest to increase the driverkit timeout (defaults to 60 seconds):

driverkit docker -c /tmp/vanilla.yaml --timeout=300

Goals

• Have a package that can build the Falco kernel module in k8s
• Have a package that can build the Falco kernel module in docker
• Have a package that can build the Falco eBPF probe in k8s
• Have a package that can build the Falco eBPF probe in docker
• Support the top distributions in our Survey and the Vanilla Kernel
  • Ubuntu (ubuntu-aws, ubuntu-generic)
  • CentOS 8
  • CentOS 7
  • CentOS 6
  • AmazonLinux (amazonlinux, amazonlinux2)
  • Debian
  • Vanilla kernel (vanilla)

Survey

We are conducting a survey to know what is the most interesting set of Operating Systems we must support first in driverkit.

You can find the results of the survey here

Creating a new Builder

You probably came here because you want to tell the Falco Drivers Build Grid to build drivers for a specific distro you care about.

If that distribution is not supported by driverkit, the Falco Drivers Build Grid will not be able to just build it as it does for other distros.

To add a new supported distribution, you need to create a specific file implementing the builder.Builder interface.

You can find the specific distribution files into the pkg/driverbuilder/builder folder.

Here's the Ubuntu one for reference.

Following this simple set of instructions should help you while you implement a new builder.Builder.

1. Builder file

Create a file, named with the name of the distro you want to add in the pkg/driverbuilder/builder folder.

touch pkg/driverbuilder/builder/archlinux.go

2. Target name

Your builder will need a constant for the target it implements. Usually that constant can just be the name of the distribution you are implementing. A builder can implement more than one target at time. For example, the Ubuntu builder implements both ubuntu-generic and ubuntu-aws to reflect the organization that the distro itself has.

Once you have the constant, you will need to add it to the BuilderByTarget map.

Open your file and you will need to have something like this:

// TargetTypeArchLinux identifies the Arch Linux target.
const TargetTypeArchLinux Type = "archlinux"

type archLinux struct {
}

func init() {
	BuilderByTarget[TargetTypeArchLinux] = &archLinux{}
}

Now, you can implement the builder.Builder interface for the archlinux struct you just registered.

Here's a very minimalistic example.

func (v archLinux) Script(c Config) (string, error) {
  return "echo 'hello world'", nil
}

Essentially, the Script function that you are implementing will need to return a string containing a bash script that will be executed by driverkit at build time.

Depending on how the distro works, the script will need to fetch the kernel headers for it at the specific kernel version specified in the Config struct at c.Build.KernelVersion. Once you have those, based on what that kernel can do and based on what was configured by the user you will need to build the kernel module driver and/or the eBPF probe driver.

How does this work?

If the user specifies:

• c.Build.ModuleFilePath you will need to build the kernel module and save it in /tmp/driver/falco.ko`
• c.Build.ProbeFilePath you will need to build the eBPF probe and save it in /tmp/driver/probe.o`

The /tmp/driver MUST be interpolated from the DriverDirectory constant from builders.go.

If you look at the various builder implemented, you will see that the task of creating a new builder can be easy or difficult depending on how the distribution ships their artifacts.

3. Customize GCC version

Driverkit builder image supports 4 gcc versions:

• GCC-8
• GCC-6.3.0
• GCC-5.5.0
• GCC-4.8.4

You can dynamically choose the one you prefer, likely switching on the kernel version.
For an example, you can check out Ubuntu builder, namely: ubuntuGCCVersionFromKernelRelease.

4. Customize llvm version

Driverkit builder image supports 2 llvm versions:

• llvm-7
• llvm-12

You can dynamically choose the one you prefer, likely switching on the kernel version.
For an example, you can check out Debian builder, namely: debianLLVMVersionFromKernelRelease.

5. kernel-crawler

When creating a new builder, it is recommended to check that kernel-crawler can also support collecting the new builders kernel versions and header package URLs. This will make sure that the latest drivers for the new builder are automatically built by test-infra. If required, add a feature request for support for the new builder on the kernel-crawler repository.