tail_sampling

type AndConfig struct {
	SubPolicyConfig []AndSubPolicyConfig `alloy:"and_sub_policy,block"`
}

type AndSubPolicyConfig struct {
	SharedPolicyConfig SharedPolicyConfig `alloy:",squash"`
}

type Arguments struct {
	PolicyCfgs              []PolicyConfig      `alloy:"policy,block"`
	DecisionWait            time.Duration       `alloy:"decision_wait,attr,optional"`
	NumTraces               uint64              `alloy:"num_traces,attr,optional"`
	ExpectedNewTracesPerSec uint64              `alloy:"expected_new_traces_per_sec,attr,optional"`
	DecisionCache           DecisionCacheConfig `alloy:"decision_cache,attr,optional"`
	// Output configures where to send processed data. Required.
	Output *otelcol.ConsumerArguments `alloy:"output,block"`
	// DebugMetrics configures component internal metrics. Optional.
	DebugMetrics otelcolCfg.DebugMetricsArguments `alloy:"debug_metrics,block,optional"`
}

type BooleanAttributeConfig struct {
	// Tag that the filter is going to be matching against.
	Key string `alloy:"key,attr"`
	// Value indicate the bool value, either true or false to use when matching against attribute values.
	// BooleanAttribute Policy will apply exact value match on Value
	Value bool `alloy:"value,attr"`
	// InvertMatch indicates that values must not match against attribute values.
	// If InvertMatch is true and Values is equal to 'true', all other values will be sampled except 'true'.
	// Also, if the specified Key does not match any resource or span attributes, data will be sampled.
	InvertMatch bool `alloy:"invert_match,attr,optional"`
}

type CompositeConfig struct {
	MaxTotalSpansPerSecond int64                      `alloy:"max_total_spans_per_second,attr"`
	PolicyOrder            []string                   `alloy:"policy_order,attr"`
	SubPolicyCfg           []CompositeSubPolicyConfig `alloy:"composite_sub_policy,block,optional"`
	RateAllocation         []RateAllocationConfig     `alloy:"rate_allocation,block,optional"`
}

type CompositeSubPolicyConfig struct {
	SharedPolicyConfig SharedPolicyConfig `alloy:",squash"`

	// Configs for and policy evaluator.
	AndConfig AndConfig `alloy:"and,block,optional"`
}

type DecisionCacheConfig struct {
	// SampledCacheSize specifies the size of the cache that holds the sampled trace IDs
	// This value will be the maximum amount of trace IDs that the cache can hold before overwriting previous IDs.
	// For effective use, this value should be at least an order of magnitude higher than Arguments.NumTraces.
	// If left as default 0, a no-op DecisionCache will be used.
	SampledCacheSize int `alloy:"sampled_cache_size,attr,optional"`
}

type ErrorMode string

type LatencyConfig struct {
	// ThresholdMs in milliseconds.
	ThresholdMs int64 `alloy:"threshold_ms,attr"`
	// Upper bound in milliseconds.
	UpperThresholdmsMs int64 `alloy:"upper_threshold_ms,attr,optional"`
}

type NumericAttributeConfig struct {
	// Tag that the filter is going to be matching against.
	Key string `alloy:"key,attr"`
	// MinValue is the minimum value of the attribute to be considered a match.
	MinValue int64 `alloy:"min_value,attr"`
	// MaxValue is the maximum value of the attribute to be considered a match.
	MaxValue int64 `alloy:"max_value,attr"`
	// InvertMatch indicates that values must not match against attribute values.
	// If InvertMatch is true and Values is equal to '123', all other values will be sampled except '123'.
	// Also, if the specified Key does not match any resource or span attributes, data will be sampled.
	InvertMatch bool `alloy:"invert_match,attr,optional"`
}

type OttlConditionConfig struct {
	ErrorMode           ErrorMode `alloy:"error_mode,attr"`
	SpanConditions      []string  `alloy:"span,attr,optional"`
	SpanEventConditions []string  `alloy:"spanevent,attr,optional"`
}

type PolicyConfig struct {
	SharedPolicyConfig SharedPolicyConfig `alloy:",squash"`

	// Configs for defining composite policy
	CompositeConfig CompositeConfig `alloy:"composite,block,optional"`

	// Configs for defining and policy
	AndConfig AndConfig `alloy:"and,block,optional"`
}

type ProbabilisticConfig struct {
	// HashSalt allows one to configure the hashing salts. This is important in scenarios where multiple layers of collectors
	// have different sampling rates: if they use the same salt all passing one layer may pass the other even if they have
	// different sampling rates, configuring different salts avoids that.
	HashSalt string `alloy:"hash_salt,attr,optional"`
	// SamplingPercentage is the percentage rate at which traces are going to be sampled. Defaults to zero, i.e.: no sample.
	// Values greater or equal 100 are treated as "sample all traces".
	SamplingPercentage float64 `alloy:"sampling_percentage,attr"`
}

type RateAllocationConfig struct {
	Policy  string `alloy:"policy,attr"`
	Percent int64  `alloy:"percent,attr"`
}

type RateLimitingConfig struct {
	// SpansPerSecond sets the limit on the maximum nuber of spans that can be processed each second.
	SpansPerSecond int64 `alloy:"spans_per_second,attr"`
}

type SharedPolicyConfig struct {
	Name                   string                 `alloy:"name,attr"`
	Type                   string                 `alloy:"type,attr"`
	LatencyConfig          LatencyConfig          `alloy:"latency,block,optional"`
	NumericAttributeConfig NumericAttributeConfig `alloy:"numeric_attribute,block,optional"`
	ProbabilisticConfig    ProbabilisticConfig    `alloy:"probabilistic,block,optional"`
	StatusCodeConfig       StatusCodeConfig       `alloy:"status_code,block,optional"`
	StringAttributeConfig  StringAttributeConfig  `alloy:"string_attribute,block,optional"`
	RateLimitingConfig     RateLimitingConfig     `alloy:"rate_limiting,block,optional"`
	SpanCountConfig        SpanCountConfig        `alloy:"span_count,block,optional"`
	BooleanAttributeConfig BooleanAttributeConfig `alloy:"boolean_attribute,block,optional"`
	OttlConditionConfig    OttlConditionConfig    `alloy:"ottl_condition,block,optional"`
	TraceStateConfig       TraceStateConfig       `alloy:"trace_state,block,optional"`
}

type SpanCountConfig struct {
	// Minimum number of spans in a Trace
	MinSpans int32 `alloy:"min_spans,attr"`
	MaxSpans int32 `alloy:"max_spans,attr,optional"`
}

type StatusCodeConfig struct {
	StatusCodes []string `alloy:"status_codes,attr"`
}

type StringAttributeConfig struct {
	// Tag that the filter is going to be matching against.
	Key string `alloy:"key,attr"`
	// Values indicate the set of values or regular expressions to use when matching against attribute values.
	// StringAttribute Policy will apply exact value match on Values unless EnabledRegexMatching is true.
	Values []string `alloy:"values,attr"`
	// EnabledRegexMatching determines whether match attribute values by regexp string.
	EnabledRegexMatching bool `alloy:"enabled_regex_matching,attr,optional"`
	// CacheMaxSize is the maximum number of attribute entries of LRU Cache that stores the matched result
	// from the regular expressions defined in Values.
	// CacheMaxSize will not be used if EnabledRegexMatching is set to false.
	CacheMaxSize int `alloy:"cache_max_size,attr,optional"`
	// InvertMatch indicates that values or regular expressions must not match against attribute values.
	// If InvertMatch is true and Values is equal to 'acme', all other values will be sampled except 'acme'.
	// Also, if the specified Key does not match on any resource or span attributes, data will be sampled.
	InvertMatch bool `alloy:"invert_match,attr,optional"`
}

type TraceStateConfig struct {
	// Tag that the filter is going to be matching against.
	Key string `alloy:"key,attr"`
	// Values indicate the set of values to use when matching against trace_state values.
	Values []string `alloy:"values,attr"`
}