iso

type Builder struct {
	// contains filtered or unexported fields
}

type Config struct {
	common.PackerConfig            `mapstructure:",squash"`
	common.HTTPConfig              `mapstructure:",squash"`
	common.ISOConfig               `mapstructure:",squash"`
	common.FloppyConfig            `mapstructure:",squash"`
	bootcommand.BootConfig         `mapstructure:",squash"`
	hypervcommon.OutputConfig      `mapstructure:",squash"`
	hypervcommon.SSHConfig         `mapstructure:",squash"`
	shutdowncommand.ShutdownConfig `mapstructure:",squash"`
	// The size, in megabytes, of the hard disk to create
	// for the VM. By default, this is 40 GB.
	DiskSize uint `mapstructure:"disk_size" required:"false"`
	// The block size of the VHD to be created.
	// Recommended disk block size for Linux hyper-v guests is 1 MiB. This
	// defaults to "32" MiB.
	DiskBlockSize uint `mapstructure:"disk_block_size" required:"false"`
	// The amount, in megabytes, of RAM to assign to the
	// VM. By default, this is 1 GB.
	RamSize uint `mapstructure:"memory" required:"false"`
	// A list of ISO paths to
	// attach to a VM when it is booted. This is most useful for unattended
	// Windows installs, which look for an Autounattend.xml file on removable
	// media. By default, no secondary ISO will be attached.
	SecondaryDvdImages []string `mapstructure:"secondary_iso_images" required:"false"`
	// If set to attach then attach and
	// mount the ISO image specified in guest_additions_path. If set to
	// none then guest additions are not attached and mounted; This is the
	// default.
	GuestAdditionsMode string `mapstructure:"guest_additions_mode" required:"false"`
	// The path to the ISO image for guest
	// additions.
	GuestAdditionsPath string `mapstructure:"guest_additions_path" required:"false"`
	// This is the name of the new virtual machine,
	// without the file extension. By default this is "packer-BUILDNAME",
	// where "BUILDNAME" is the name of the build.
	VMName string `mapstructure:"vm_name" required:"false"`
	// The name of the switch to connect the virtual
	// machine to. By default, leaving this value unset will cause Packer to
	// try and determine the switch to use by looking for an external switch
	// that is up and running.
	SwitchName string `mapstructure:"switch_name" required:"false"`
	// This is the VLAN of the virtual switch's
	// network card. By default none is set. If none is set then a VLAN is not
	// set on the switch's network card. If this value is set it should match
	// the VLAN specified in by vlan_id.
	SwitchVlanId string `mapstructure:"switch_vlan_id" required:"false"`
	// This allows a specific MAC address to be used on
	// the default virtual network card. The MAC address must be a string with
	// no delimiters, for example "0000deadbeef".
	MacAddress string `mapstructure:"mac_address" required:"false"`
	// This is the VLAN of the virtual machine's network
	// card for the new virtual machine. By default none is set. If none is set
	// then VLANs are not set on the virtual machine's network card.
	VlanId string `mapstructure:"vlan_id" required:"false"`
	// The number of CPUs the virtual machine should use. If
	// this isn't specified, the default is 1 CPU.
	Cpu uint `mapstructure:"cpus" required:"false"`
	// The Hyper-V generation for the virtual machine. By
	// default, this is 1. Generation 2 Hyper-V virtual machines do not support
	// floppy drives. In this scenario use secondary_iso_images instead. Hard
	// drives and DVD drives will also be SCSI and not IDE.
	Generation uint `mapstructure:"generation" required:"false"`
	// If true enable MAC address spoofing
	// for the virtual machine. This defaults to false.
	EnableMacSpoofing bool `mapstructure:"enable_mac_spoofing" required:"false"`
	// If true use a legacy network adapter as the NIC.
	// This defaults to false. A legacy network adapter is fully emulated NIC, and is thus
	// supported by various exotic operating systems, but this emulation requires
	// additional overhead and should only be used if absolutely necessary.
	UseLegacyNetworkAdapter bool `mapstructure:"use_legacy_network_adapter" required:"false"`
	// If true enable dynamic memory for
	// the virtual machine. This defaults to false.
	EnableDynamicMemory bool `mapstructure:"enable_dynamic_memory" required:"false"`
	// If true enable secure boot for the
	// virtual machine. This defaults to false. See secure_boot_template
	// below for additional settings.
	EnableSecureBoot bool `mapstructure:"enable_secure_boot" required:"false"`
	// The secure boot template to be
	// configured. Valid values are "MicrosoftWindows" (Windows) or
	// "MicrosoftUEFICertificateAuthority" (Linux). This only takes effect if
	// enable_secure_boot is set to "true". This defaults to "MicrosoftWindows".
	SecureBootTemplate string `mapstructure:"secure_boot_template" required:"false"`
	// If true enable
	// virtualization extensions for the virtual machine. This defaults to
	// false. For nested virtualization you need to enable MAC spoofing,
	// disable dynamic memory and have at least 4GB of RAM assigned to the
	// virtual machine.
	EnableVirtualizationExtensions bool `mapstructure:"enable_virtualization_extensions" required:"false"`
	// The location under which Packer will create a directory to house all the
	// VM files and folders during the build. By default `%TEMP%` is used
	// which, for most systems, will evaluate to
	// `%USERPROFILE%/AppData/Local/Temp`.
	//
	// The build directory housed under `temp_path` will have a name similar to
	// `packerhv1234567`. The seven digit number at the end of the name is
	// automatically generated by Packer to ensure the directory name is
	// unique.
	TempPath string `mapstructure:"temp_path" required:"false"`
	// This allows you to set the vm version when calling New-VM to generate
	// the vm.
	Version string `mapstructure:"configuration_version" required:"false"`
	// If "true", Packer will not delete the VM from
	// The Hyper-V manager.
	KeepRegistered bool `mapstructure:"keep_registered" required:"false"`

	Communicator string `mapstructure:"communicator"`
	// The size or sizes of any
	// additional hard disks for the VM in megabytes. If this is not specified
	// then the VM will only contain a primary hard disk. Additional drives
	// will be attached to the SCSI interface only. The builder uses
	// expandable rather than fixed-size virtual hard disks, so the actual
	// file representing the disk will not use the full size unless it is
	// full.
	AdditionalDiskSize []uint `mapstructure:"disk_additional_size" required:"false"`
	// If true skip compacting the hard disk for
	// the virtual machine when exporting. This defaults to false.
	SkipCompaction bool `mapstructure:"skip_compaction" required:"false"`
	// If true Packer will skip the export of the VM.
	// If you are interested only in the VHD/VHDX files, you can enable this
	// option. The resulting VHD/VHDX file will be output to
	// <output_directory>/Virtual Hard Disks. By default this option is false
	// and Packer will export the VM to output_directory.
	SkipExport bool `mapstructure:"skip_export" required:"false"`
	// If true enables differencing disks. Only
	// the changes will be written to the new disk. This is especially useful if
	// your source is a VHD/VHDX. This defaults to false.
	DifferencingDisk bool `mapstructure:"differencing_disk" required:"false"`
	// If true, creates the boot disk on the
	// virtual machine as a fixed VHD format disk. The default is false, which
	// creates a dynamic VHDX format disk. This option requires setting
	// generation to 1, skip_compaction to true, and
	// differencing_disk to false. Additionally, any value entered for
	// disk_block_size will be ignored. The most likely use case for this
	// option is outputing a disk that is in the format required for upload to
	// Azure.
	FixedVHD bool `mapstructure:"use_fixed_vhd_format" required:"false"`
	// Packer defaults to building Hyper-V virtual
	// machines by launching a GUI that shows the console of the machine being
	// built. When this value is set to true, the machine will start without a
	// console.
	Headless bool `mapstructure:"headless" required:"false"`
	// contains filtered or unexported fields
}