iso

type Builder struct {
	// contains filtered or unexported fields
}

type Config struct {
	common.PackerConfig             `mapstructure:",squash"`
	common.HTTPConfig               `mapstructure:",squash"`
	common.ISOConfig                `mapstructure:",squash"`
	common.FloppyConfig             `mapstructure:",squash"`
	bootcommand.BootConfig          `mapstructure:",squash"`
	vboxcommon.ExportConfig         `mapstructure:",squash"`
	vboxcommon.OutputConfig         `mapstructure:",squash"`
	vboxcommon.RunConfig            `mapstructure:",squash"`
	vboxcommon.ShutdownConfig       `mapstructure:",squash"`
	vboxcommon.SSHConfig            `mapstructure:",squash"`
	vboxcommon.HWConfig             `mapstructure:",squash"`
	vboxcommon.VBoxManageConfig     `mapstructure:",squash"`
	vboxcommon.VBoxVersionConfig    `mapstructure:",squash"`
	vboxcommon.VBoxBundleConfig     `mapstructure:",squash"`
	vboxcommon.GuestAdditionsConfig `mapstructure:",squash"`
	// The size, in megabytes, of the hard disk to create for the VM. By
	// default, this is 40000 (about 40 GB).
	DiskSize uint `mapstructure:"disk_size" required:"false"`
	// The method by which guest additions are made available to the guest for
	// installation. Valid options are upload, attach, or disable. If the mode
	// is attach the guest additions ISO will be attached as a CD device to the
	// virtual machine. If the mode is upload the guest additions ISO will be
	// uploaded to the path specified by guest_additions_path. The default
	// value is upload. If disable is used, guest additions won't be
	// downloaded, either.
	GuestAdditionsMode string `mapstructure:"guest_additions_mode" required:"false"`
	// The path on the guest virtual machine where the VirtualBox guest
	// additions ISO will be uploaded. By default this is
	// VBoxGuestAdditions.iso which should upload into the login directory of
	// the user. This is a configuration template where the Version variable is
	// replaced with the VirtualBox version.
	GuestAdditionsPath string `mapstructure:"guest_additions_path" required:"false"`
	// The SHA256 checksum of the guest additions ISO that will be uploaded to
	// the guest VM. By default the checksums will be downloaded from the
	// VirtualBox website, so this only needs to be set if you want to be
	// explicit about the checksum.
	GuestAdditionsSHA256 string `mapstructure:"guest_additions_sha256" required:"false"`
	// The URL to the guest additions ISO to upload. This can also be a file
	// URL if the ISO is at a local path. By default, the VirtualBox builder
	// will attempt to find the guest additions ISO on the local file system.
	// If it is not available locally, the builder will download the proper
	// guest additions ISO from the internet.
	GuestAdditionsURL string `mapstructure:"guest_additions_url" required:"false"`
	// The interface type to use to mount guest additions when
	// guest_additions_mode is set to attach. Will default to the value set in
	// iso_interface, if iso_interface is set. Will default to "ide", if
	// iso_interface is not set. Options are "ide" and "sata".
	GuestAdditionsInterface string `mapstructure:"guest_additions_interface" required:"false"`
	// The guest OS type being installed. By default this is other, but you can
	// get dramatic performance improvements by setting this to the proper
	// value. To view all available values for this run VBoxManage list
	// ostypes. Setting the correct value hints to VirtualBox how to optimize
	// the virtual hardware to work best with that operating system.
	GuestOSType string `mapstructure:"guest_os_type" required:"false"`
	// When this value is set to true, a VDI image will be shrunk in response
	// to the trim command from the guest OS. The size of the cleared area must
	// be at least 1MB. Also set hard_drive_nonrotational to true to enable
	// TRIM support.
	HardDriveDiscard bool `mapstructure:"hard_drive_discard" required:"false"`
	// The type of controller that the primary hard drive is attached to,
	// defaults to ide. When set to sata, the drive is attached to an AHCI SATA
	// controller. When set to scsi, the drive is attached to an LsiLogic SCSI
	// controller.
	HardDriveInterface string `mapstructure:"hard_drive_interface" required:"false"`
	// The number of ports available on any SATA controller created, defaults
	// to 1. VirtualBox supports up to 30 ports on a maximum of 1 SATA
	// controller. Increasing this value can be useful if you want to attach
	// additional drives.
	SATAPortCount int `mapstructure:"sata_port_count" required:"false"`
	// Forces some guests (i.e. Windows 7+) to treat disks as SSDs and stops
	// them from performing disk fragmentation. Also set hard_drive_discard to
	// true to enable TRIM support.
	HardDriveNonrotational bool `mapstructure:"hard_drive_nonrotational" required:"false"`
	// The type of controller that the ISO is attached to, defaults to ide.
	// When set to sata, the drive is attached to an AHCI SATA controller.
	ISOInterface string `mapstructure:"iso_interface" required:"false"`
	// Set this to true if you would like to keep the VM registered with
	// virtualbox. Defaults to false.
	KeepRegistered bool `mapstructure:"keep_registered" required:"false"`
	// Defaults to false. When enabled, Packer will not export the VM. Useful
	// if the build output is not the resultant image, but created inside the
	// VM.
	SkipExport bool `mapstructure:"skip_export" required:"false"`
	// This is the name of the OVF file for the new virtual machine, without
	// the file extension. By default this is packer-BUILDNAME, where
	// "BUILDNAME" is the name of the build.
	VMName string `mapstructure:"vm_name" required:"false"`
	// contains filtered or unexported fields
}