envoy

type BootstrapConfig struct {
	// StatsdURL allows simple configuration of the statsd metrics sink. If
	// tagging is required, use DogstatsdURL instead. The URL must be in one of
	// the following forms:
	//   - udp://<ip>:<port>
	//   - $ENV_VAR_NAME        in this case the ENV var named will have it's
	//                          value taken and is expected to contain a URL in
	//									 				one of the supported forms above.
	StatsdURL string `mapstructure:"envoy_statsd_url"`

	// DogstatsdURL allows simple configuration of the dogstatsd metrics sink
	// which allows tags and Unix domain sockets. The URL must be in one of the
	// following forms:
	//   - udp://<ip>:<port>
	//   - unix:///full/path/to/unix.sock
	//   - $ENV_VAR_NAME        in this case the ENV var named will have it's
	//                          value taken and is expected to contain a URL in
	//									 				one of the supported forms above.
	DogstatsdURL string `mapstructure:"envoy_dogstatsd_url"`

	// StatsTags is a slice of string values that will be added as tags to
	// metrics. They are used to configure
	// https://www.envoyproxy.io/docs/envoy/v1.9.0/api-v2/config/metrics/v2/stats.proto#envoy-api-msg-config-metrics-v2-statsconfig
	// and add to the basic tags Consul adds by default like the local_cluster
	// name. Only exact values are supported here. Full configuration of
	// stats_config.stats_tags can be made by overriding envoy_stats_config_json.
	StatsTags []string `mapstructure:"envoy_stats_tags"`

	// TelemetryCollectorBindSocketDir is a string that configures the directory for a
	// unix socket where Envoy will forward metrics. These metrics get pushed to
	// the telemetry collector.
	TelemetryCollectorBindSocketDir string `mapstructure:"envoy_telemetry_collector_bind_socket_dir"`

	// PrometheusBindAddr configures an <ip>:<port> on which the Envoy will listen
	// and expose a single /metrics HTTP endpoint for Prometheus to scrape. It
	// does this by proxying that URL to the internal admin server's prometheus
	// endpoint which allows exposing metrics on the network without the security
	// risk of exposing the full admin server API. Any other URL requested will be
	// a 404.
	//
	// Note that as of Envoy 1.9.0, the built in Prometheus endpoint only exports
	// counters and gauges but not timing information via histograms. This is
	// fixed in 1.10-dev currently in Envoy master. Other changes since 1.9.0 make
	// master incompatible with the current release of Consul Connect. This will
	// be fixed in a future Consul version as Envoy 1.10 reaches stable release.
	PrometheusBindAddr string `mapstructure:"envoy_prometheus_bind_addr"`

	// StatsBindAddr configures an <ip>:<port> on which the Envoy will listen
	// and expose the /stats HTTP path prefix for any agent to access. It
	// does this by proxying that path prefix to the internal admin server
	// which allows exposing metrics on the network without the security
	// risk of exposing the full admin server API. Any other URL requested will be
	// a 404.
	StatsBindAddr string `mapstructure:"envoy_stats_bind_addr"`

	// ReadyBindAddr configures an <ip>:<port> on which Envoy will listen and
	// expose a single /ready HTTP endpoint. This is useful for checking the
	// liveness of an Envoy instance when no other listeners are garaunteed to be
	// configured, as is the case with ingress gateways.
	//
	// Note that we do not allow this to be configured via the service
	// definition config map currently.
	ReadyBindAddr string `mapstructure:"-"`

	// OverrideJSONTpl allows replacing the base template used to render the
	// bootstrap. This is an "escape hatch" allowing arbitrary control over the
	// proxy's configuration but will the most effort to maintain and correctly
	// configure the aspects that Connect relies upon to work. It's recommended
	// that this only be used if necessary, and that it be based on the default
	// template in
	// https://github.com/hernad/consul/blob/main/command/connect/envoy/bootstrap_tpl.go
	// for the correct version of Consul and Envoy being used.
	OverrideJSONTpl string `mapstructure:"envoy_bootstrap_json_tpl"`

	// StaticClustersJSON is a JSON string containing zero or more Cluster
	// definitions. They are appended to the "static_resources.clusters" list. A
	// single cluster should be given as a plain object, if more than one is to be
	// added, they should be separated by a comma suitable for direct injection
	// into a JSON array.
	//
	// Note that cluster names should be chosen in such a way that they won't
	// collide with service names since we use plain service names as cluster
	// names in xDS to make metrics population simpler and cluster names mush be
	// unique.
	//
	// This is mostly intended for providing clusters for tracing or metrics
	// services.
	//
	// See https://www.envoyproxy.io/docs/envoy/v1.9.0/api-v2/api/v2/cds.proto.
	StaticClustersJSON string `mapstructure:"envoy_extra_static_clusters_json"`

	// StaticListenersJSON is a JSON string containing zero or more Listener
	// definitions. They are appended to the "static_resources.listeners" list. A
	// single listener should be given as a plain object, if more than one is to
	// be added, they should be separated by a comma suitable for direct injection
	// into a JSON array.
	//
	// See https://www.envoyproxy.io/docs/envoy/v1.9.0/api-v2/api/v2/lds.proto.
	StaticListenersJSON string `mapstructure:"envoy_extra_static_listeners_json"`

	// StatsSinksJSON is a JSON string containing zero or more StatsSink
	// definititions. They are appended to the `stats_sinks` array at the top
	// level of the bootstrap config. A single sink should be given as a plain
	// object, if more than one is to be added, they should be separated by a
	// comma suitable for direct injection into a JSON array.
	//
	// See
	// https://www.envoyproxy.io/docs/envoy/v1.9.0/api-v2/config/metrics/v2/stats.proto#config-metrics-v2-statssink.
	//
	// If this is non-empty then it will override anything configured in
	// StatsTags.
	StatsSinksJSON string `mapstructure:"envoy_extra_stats_sinks_json"`

	// StatsConfigJSON is a JSON string containing an object in the right format
	// to be rendered as the body of the `stats_config` field at the top level of
	// the bootstrap config. It's format may vary based on Envoy version used. See
	// https://www.envoyproxy.io/docs/envoy/v1.9.0/api-v2/config/metrics/v2/stats.proto#envoy-api-msg-config-metrics-v2-statsconfig.
	//
	// If this is non-empty then it will override anything configured in
	// StatsdURL or DogstatsdURL.
	StatsConfigJSON string `mapstructure:"envoy_stats_config_json"`

	// StatsFlushInterval is the time duration between Envoy stats flushes. It is
	// in proto3 "duration" string format for example "1.12s" See
	// https://developers.google.com/protocol-buffers/docs/proto3#json and
	// https://www.envoyproxy.io/docs/envoy/v1.9.0/api-v2/config/bootstrap/v2/bootstrap.proto#bootstrap
	StatsFlushInterval string `mapstructure:"envoy_stats_flush_interval"`

	// TracingConfigJSON is a JSON string containing an object in the right format
	// to be rendered as the body of the `tracing` field at the top level of
	// the bootstrap config. It's format may vary based on Envoy version used.
	// See https://www.envoyproxy.io/docs/envoy/v1.9.0/api-v2/config/trace/v2/trace.proto.
	TracingConfigJSON string `mapstructure:"envoy_tracing_json"`
}

type BootstrapTplArgs struct {
	GRPC

	// ProxyCluster is the cluster name for the the Envoy `node` specification and
	// is typically the same as the ProxyID.
	ProxyCluster string

	// ProxyID is the ID of the proxy service instance as registered with the
	// local Consul agent. This must be used as the Envoy `node.id` in order for
	// the agent to deliver the correct configuration.
	ProxyID string

	// NodeName is the name of the node on which the proxy service instance is registered.
	NodeName string

	// ProxySourceService is the Consul service name to report for this proxy
	// instance's source service label. For sidecars it should be the
	// Proxy.DestinationServiceName. For gateways and similar it is the service
	// name of the proxy service itself.
	ProxySourceService string

	// AgentCAPEM is the CA to use to verify the local agent gRPC service if
	// TLS is enabled.
	AgentCAPEM string

	// AdminAccessLogConfig string representations of Envoy access log
	// configurations for the admin interface.
	AdminAccessLogConfig []string

	// AdminAccessLogPath The path to write the access log for the
	// administration server. If no access log is desired specify
	// "/dev/null". By default it will use "/dev/null". Will be overriden by
	// AdminAccessLogConfig.
	// DEPRECATED: use AdminAccessLogConfig
	AdminAccessLogPath string

	// AdminBindAddress is the address the Envoy admin server should bind to.
	AdminBindAddress string

	// AdminBindPort is the port the Envoy admin server should bind to.
	AdminBindPort string

	// LocalAgentClusterName is the name reserved for the local Consul agent gRPC
	// service and is expected to be used for that purpose.
	LocalAgentClusterName string

	// Token is the Consul ACL token provided which is required to make gRPC
	// discovery requests. If non-empty, this must be configured as the gRPC
	// service "initial_metadata" with the key "x-consul-token" in order to
	// authorize the discovery streaming RPCs.
	Token string

	// StaticClustersJSON is JSON string, each is expected to be a valid Cluster
	// definition. They are appended to the "static_resources.clusters" list. Note
	// that cluster names should be chosen in such a way that they won't collide
	// with service names since we use plain service names as cluster names in xDS
	// to make metrics population simpler and cluster names mush be unique. See
	// https://www.envoyproxy.io/docs/envoy/v1.9.0/api-v2/api/v2/cds.proto.
	StaticClustersJSON string

	// StaticListenersJSON is a JSON string containing zero or more Listener
	// definitions. They are appended to the "static_resources.listeners" list. A
	// single listener should be given as a plain object, if more than one is to
	// be added, they should be separated by a comma suitable for direct injection
	// into a JSON array.
	// See https://www.envoyproxy.io/docs/envoy/v1.9.0/api-v2/api/v2/lds.proto.
	StaticListenersJSON string

	// StatsSinksJSON is a JSON string containing an array in the right format
	// to be rendered as the body of the `stats_sinks` field at the top level of
	// the bootstrap config. It's format may vary based on Envoy version used. See
	// https://www.envoyproxy.io/docs/envoy/v1.9.0/api-v2/config/metrics/v2/stats.proto#config-metrics-v2-statssink.
	StatsSinksJSON string

	// StatsConfigJSON is a JSON string containing an object in the right format
	// to be rendered as the body of the `stats_config` field at the top level of
	// the bootstrap config. It's format may vary based on Envoy version used. See
	// https://www.envoyproxy.io/docs/envoy/v1.9.0/api-v2/config/metrics/v2/stats.proto#envoy-api-msg-config-metrics-v2-statsconfig.
	StatsConfigJSON string

	// StaticSecretsJSON is a JSON string containing zero or more Secret definitions.
	// See https://www.envoyproxy.io/docs/envoy/latest/api-v3/extensions/transport_sockets/tls/v3/secret.proto#envoy-v3-api-msg-extensions-transport-sockets-tls-v3-secret
	StaticSecretsJSON string

	// StatsFlushInterval is the time duration between Envoy stats flushes. It is
	// in proto3 "duration" string format for example "1.12s" See
	// https://developers.google.com/protocol-buffers/docs/proto3#json and
	// https://www.envoyproxy.io/docs/envoy/v1.9.0/api-v2/config/bootstrap/v2/bootstrap.proto#bootstrap
	StatsFlushInterval string

	// TracingConfigJSON is a JSON string containing an object in the right format
	// to be rendered as the body of the `tracing` field at the top level of
	// the bootstrap config. It's format may vary based on Envoy version used.
	// See https://www.envoyproxy.io/docs/envoy/v1.9.0/api-v2/config/trace/v2/trace.proto.
	TracingConfigJSON string

	// Namespace is the Consul Enterprise Namespace of the proxy service instance
	// as registered with the Consul agent.
	Namespace string

	// Partition is the Consul Enterprise Partition of the proxy service instance
	// as registered with the Consul agent.
	Partition string

	// Datacenter is the datacenter where the proxy service instance is registered.
	Datacenter string

	// PrometheusBackendPort will configure a "prometheus_backend" cluster which
	// envoy_prometheus_bind_addr will point to.
	PrometheusBackendPort string

	// PrometheusScrapePath will configure the path where metrics are exposed on
	// the envoy_prometheus_bind_addr listener.
	PrometheusScrapePath string

	// PrometheusCAFile is the path to a CA file for Envoy to use when serving TLS on the Prometheius metrics
	// endpoint. Only applicable when envoy_prometheus_bind_addr is set in the proxy config.
	PrometheusCAFile string

	// PrometheusCAPath is the path to a directory of CA certificates for Envoy to use when serving the Prometheus
	// metrics endpoint. Only applicable when envoy_prometheus_bind_addr is set in the proxy config.
	PrometheusCAPath string

	// PrometheusCertFile is the path to a certificate file for Envoy to use when serving TLS on the Prometheus
	// metrics endpoint. Only applicable when envoy_prometheus_bind_addr is set in the proxy config.
	PrometheusCertFile string

	// PrometheusKeyFile is the path to a private key file Envoy to use when serving TLS on the Prometheus metrics
	// endpoint. Only applicable when envoy_prometheus_bind_addr is set in the proxy config.
	PrometheusKeyFile string
}

type GRPC struct {
	// AgentAddress is the IP address of the local agent where the proxy instance
	// is registered.
	AgentAddress string

	// AgentPort is the gRPC port exposed on the local agent.
	AgentPort string

	// AgentTLS is true if the local agent gRPC service should be accessed over
	// TLS.
	AgentTLS bool

	// AgentSocket is the path to a Unix Socket for communicating with the
	// local agent's gRPC endpoint. Disabled if the empty (the default),
	// but overrides AgentAddress and AgentPort if set.
	AgentSocket string
}

type ServiceAddressMapValue struct {
	// contains filtered or unexported fields
}

type ServiceAddressValue struct {
	// contains filtered or unexported fields
}