smartctl

smartctl JSON Input Plugin

This plugin collects Self-Monitoring, Analysis and Reporting Technology information for storage devices information using the [smartmontools][smartmon] package. Contrary to the smart plugin, this plugin does not use the nvme-cli package to collect additional information about NVMe devices.

[!NOTE] This plugin requires [smartmontools][smartmon] to be installed on your system. The smartctl command must to be executable by Telegraf and must supporting JSON output. JSON output was added in v7.0 and improved in subsequent releases

⭐ Telegraf v1.31.0 🏷️ hardware, system 💻 all

Global configuration options

Plugins support additional global and plugin configuration settings for tasks such as modifying metrics, tags, and fields, creating aliases, and configuring plugin ordering. See CONFIGURATION.md for more details.

Configuration

# Read metrics from SMART storage devices using smartclt's JSON output
[[inputs.smartctl]]
    ## Optionally specify the path to the smartctl executable
    # path = "/usr/sbin/smartctl"

    ## Use sudo
    ## On most platforms used, smartctl requires root access. Setting 'use_sudo'
    ## to true will make use of sudo to run smartctl. Sudo must be configured to
    ## allow the telegraf user to run smartctl without a password.
    # use_sudo = false

    ## Devices to include or exclude
    ## By default, the plugin will use all devices found in the output of
    ## `smartctl --scan-open`. Only one option is allowed at a time. If set, include
    ## sets the specific devices to scan, while exclude omits specific devices.
    # devices_include = []
    # devices_exclude = []

    ## Skip checking disks in specified power mode
    ## Defaults to "standby" to not wake up disks that have stopped rotating.
    ## For full details on the options here, see the --nocheck section in the
    ## smartctl man page. Choose from:
    ##   * never: always check the device
    ##   * sleep: check the device unless it is in sleep mode
    ##   * standby: check the device unless it is in sleep or standby mode
    ##   * idle: check the device unless it is in sleep, standby, or idle mode
    # nocheck = "standby"

    ## Timeout for the cli command to complete
    # timeout = "30s"

Permissions

It is important to note that this plugin references smartctl, which may require additional permissions to execute successfully. Depending on the user/group permissions of the telegraf user executing this plugin, users may need to use sudo.

Users need the following in the Telegraf config:

[[inputs.smart_json]]
  use_sudo = true

And to update the /etc/sudoers file to allow running smartctl:

$ visudo
# Add the following lines:
Cmnd_Alias SMARTCTL = /usr/sbin/smartctl
telegraf  ALL=(ALL) NOPASSWD: SMARTCTL
Defaults!SMARTCTL !logfile, !syslog, !pam_session

Troubleshooting

This plugin uses the following commands to determine devices and collect metrics:

• smartctl --json --scan-open
• smartctl --json --all $DEVICE --device $TYPE --nocheck=$NOCHECK

Please include the output of the above two commands for all devices that are having issues.

Metrics

• smartctl

  • tags
    • model (model name of the storage device)
    • name (device id in the system)
    • serial (serial number of the device)
    • type (device type like SATA etc)
    • wwn (world wide number of the device)
  • fields
    • depending on the device information

• smartctl_attributes

  • tags
    • model (model name of the storage device)
    • name (name of the attribute)
    • serial (serial number of the device)
    • type (device type like SATA etc)
    • wwn (world wide number of the device)
  • fields
    • raw_value (integer)
    • threshold (integer)
    • value (integer)
    • worst (integer)

Example Output

smartctl,model=SanDisk\ pSSD,name=/dev/sda,serial=06c9f4c44,type=sat,wwn=5001b4409f6c444c capacity=15693664256i,firmware="3",health_ok=true,logical_block_size=512i,power_on_hours=11i,temperature=0i 1711480345675066854
smartctl_attributes,model=SanDisk\ pSSD,name=Reallocated_Sector_Ct,serial=06c9f4c44,type=sat,wwn=5001b4409f6c444c raw_value=0i,threshold=0i,value=100i,worst=100i 1711480345675066854
smartctl_attributes,model=SanDisk\ pSSD,name=Power_On_Hours,serial=06c9f4c44,type=sat,wwn=5001b4409f6c444c raw_value=11i,threshold=0i,value=100i,worst=100i 1711480345675066854
smartctl_attributes,model=SanDisk\ pSSD,name=Power_Cycle_Count,serial=06c9f4c44,type=sat,wwn=5001b4409f6c444c raw_value=223i,threshold=0i,value=100i,worst=100i 1711480345675066854
smartctl_attributes,model=SanDisk\ pSSD,name=Program_Fail_Count,serial=06c9f4c44,type=sat,wwn=5001b4409f6c444c raw_value=0i,threshold=0i,value=100i,worst=100i 1711480345675066854
smartctl_attributes,model=SanDisk\ pSSD,name=Erase_Fail_Count,serial=06c9f4c44,type=sat,wwn=5001b4409f6c444c raw_value=0i,threshold=0i,value=100i,worst=100i 1711480345675066854
smartctl_attributes,model=SanDisk\ pSSD,name=Avg_Write/Erase_Count,serial=06c9f4c44,type=sat,wwn=5001b4409f6c444c raw_value=3i,threshold=0i,value=100i,worst=100i 1711480345675066854
smartctl_attributes,model=SanDisk\ pSSD,name=Unexpect_Power_Loss_Ct,serial=06c9f4c44,type=sat,wwn=5001b4409f6c444c raw_value=114i,threshold=0i,value=100i,worst=100i 1711480345675066854
smartctl_attributes,model=SanDisk\ pSSD,name=Reported_Uncorrect,serial=06c9f4c44,type=sat,wwn=5001b4409f6c444c raw_value=0i,threshold=0i,value=100i,worst=100i 1711480345675066854
smartctl_attributes,model=SanDisk\ pSSD,name=Perc_Write/Erase_Count,serial=06c9f4c44,type=sat,wwn=5001b4409f6c444c raw_value=10i,threshold=0i,value=100i,worst=100i 1711480345675066854
smartctl_attributes,model=SanDisk\ pSSD,name=Perc_Avail_Resrvd_Space,serial=06c9f4c44,type=sat,wwn=5001b4409f6c444c raw_value=0i,threshold=5i,value=100i,worst=100i 1711480345675066854
smartctl_attributes,model=SanDisk\ pSSD,name=Perc_Write/Erase_Ct_BC,serial=06c9f4c44,type=sat,wwn=5001b4409f6c444c raw_value=0i,threshold=0i,value=100i,worst=100i 1711480345675066854
smartctl_attributes,model=SanDisk\ pSSD,name=Total_LBAs_Written,serial=06c9f4c44,type=sat,wwn=5001b4409f6c444c raw_value=10171055i,threshold=0i,value=100i,worst=100i 1711480345675066854
smartctl_attributes,model=SanDisk\ pSSD,name=Total_LBAs_Read,serial=06c9f4c44,type=sat,wwn=5001b4409f6c444c raw_value=94845144i,threshold=0i,value=100i,worst=100i 1711480345675066854