Documentation
¶
Overview ¶
Package netutil sets up the Linux networking for endpoints: veth pairs, routing and NAT.
Index ¶
- Constants
- Variables
- func AddIPAMAddress(nsPath, ifName, ip string) error
- func CleanupAllNAT() error
- func CleanupNAT(vethHost string) error
- func CleanupTailnetBlackhole(nsPath string) error
- func ConfigureHostEndpoints(c HostEndpointsConfig)
- func ConfigurePortMapping(sport int, ports PortRange)
- func CreateVethPair(baseName string, mtu int) (string, string, error)
- func DeleteVeth(name string) error
- func HostEndpointAddrs() ([]netip.Addr, error)
- func HostEndpoints(vethHost string) ([]netip.AddrPort, error)
- func ListenInNetNS(nsPath, addr string) (net.Listener, error)
- func MoveToNetNS(ifName string, nsPath string) error
- func RemoveHostIsolation() error
- func SetupBypassRoute(nsPath, ifName, gatewayIP string) error
- func SetupContainerRouting(nsPath string, ifName string, containerIP string, gatewayIP string) error
- func SetupHostIsolation(bridges []string) error
- func SetupHostRouting(vethHost string, hostIP string) error
- func SetupInterfaceInNS(nsPath string, ifName string, newName string) error
- func SetupNAT(vethHost string) error
- func SetupTailnetBlackhole(nsPath string) error
- func SetupVethIsolation(port int) error
- func SyncPortMappings() error
- func UsedVethSubnets() (map[netip.Prefix]bool, error)
- func VethIPv4(name string) (string, error)
- type HostEndpointsConfig
- type PortRange
Constants ¶
const DefaultMTU = 1500
DefaultMTU is the veth MTU when the network sets none.
const MaxHostEndpoints = 3
MaxHostEndpoints is how many endpoints tailscaled takes from TS_DEBUG_PRETENDPOINT; it drops more without a word.
Variables ¶
var DefaultPortRange = PortRange{61000, 65535}
DefaultPortRange holds the external ports of tailscaled's WireGuard traffic. It lies above Linux's default ephemeral range (32768-60999), so the host's own connections do not use them.
var ErrNoPortMapping = errors.New("no external port mapped")
ErrNoPortMapping is HostEndpoints' error for a container whose tailscaled has no external port (portMapChain) at the moment, as while its rule is missing until the next SyncPortMappings.
Functions ¶
func AddIPAMAddress ¶ added in v0.2.3
AddIPAMAddress puts the address Docker's IPAM assigned to an endpoint on the interface ifName in the namespace at nsPath, as a /32. tslink connects the container through its own veth subnet, but Docker lists the IPAM address in the container's /etc/hosts: a process that resolves its own name to it, as RabbitMQ's epmd does, must be able to reach it. A /32 adds no route, so the network's other addresses stay unreachable here.
func CleanupAllNAT ¶
func CleanupAllNAT() error
CleanupAllNAT removes the entire custom chain and all its rules. This is useful for complete plugin cleanup.
func CleanupNAT ¶
CleanupNAT removes the FORWARD rules and the port mapping for a specific veth interface, and the port mappings of veths that are gone. The global MASQUERADE rule and chain structure are intentionally left in place.
func CleanupTailnetBlackhole ¶
CleanupTailnetBlackhole removes the routes added by SetupTailnetBlackhole. A namespace or route that is already gone is not an error.
Note that a container that stays attached to another network regains a path to the tailnet ranges through the host once these routes are removed.
func ConfigureHostEndpoints ¶ added in v0.2.2
func ConfigureHostEndpoints(c HostEndpointsConfig)
ConfigureHostEndpoints sets the addresses HostEndpointAddrs returns.
func ConfigurePortMapping ¶ added in v0.2.1
ConfigurePortMapping sets tailscaled's UDP port in the containers and the range of external ports SetupNAT maps it to. Rules in place keep their ports.
func CreateVethPair ¶
CreateVethPair creates a veth pair with the given base name and MTU (0 for DefaultMTU). Returns the host-side name and container-side name.
func HostEndpointAddrs ¶ added in v0.2.2
HostEndpointAddrs returns the addresses tslink nodes advertise, as configured: none, the given ones, or the host's private addresses (selectHostAddrs).
func HostEndpoints ¶ added in v0.2.2
HostEndpoints returns the endpoints the tailscaled behind vethHost advertises: each of HostEndpointAddrs with its external port. None if no address is configured or found.
func ListenInNetNS ¶
ListenInNetNS opens a TCP listener on addr in the network namespace at nsPath. The socket belongs to the namespace it was created in, so it keeps listening there after the thread returns to the plugin's namespace, and only that namespace's processes reach a loopback address.
func MoveToNetNS ¶
MoveToNetNS moves a network interface to the specified network namespace.
func RemoveHostIsolation ¶
func RemoveHostIsolation() error
RemoveHostIsolation removes the host's tailnet isolation, and tolerates its absence.
func SetupBypassRoute ¶
SetupBypassRoute sends tailscaled's own traffic through the tslink veth, whatever the container's default route. A task on an overlay network defaults via docker_gwbridge, and Docker may detach that network before tslink's: tailscaled would then lose the control plane before it can log out, and the device would linger.
func SetupContainerRouting ¶
func SetupContainerRouting( nsPath string, ifName string, containerIP string, gatewayIP string, ) error
SetupContainerRouting sets up routing inside the container namespace.
func SetupHostIsolation ¶
SetupHostIsolation installs the host's tailnet isolation, or restores it: rules another program removed, and jumps it pushed down. bridges are the interface names of Docker's bridge networks, which containerInterfaces may not match. It changes nothing that is in place, so it can run periodically.
func SetupHostRouting ¶
SetupHostRouting sets up routing on the host side for internet access.
func SetupInterfaceInNS ¶
SetupInterfaceInNS sets up an interface inside a network namespace.
func SetupNAT ¶
SetupNAT sets up MASQUERADE for traffic from the container. Uses a custom chain (TS-CNI-FORWARD) for organized rule management. vethHost must have its address: the container's tailscaled gets its own external port (see portMapChain).
func SetupTailnetBlackhole ¶
SetupTailnetBlackhole installs unreachable routes for the tailnet ranges in the main table of the container namespace. tailscaled's policy rules consult table 52 first, so peers it can reach still route via tailscale0.
The IPv4 route is mandatory. The IPv6 route may fail when IPv6 is disabled in the namespace; that is accepted only if the namespace has no route to the IPv6 range anyway.
func SetupVethIsolation ¶
SetupVethIsolation installs the veth isolation, or restores it, letting only replies and UDP to port from tslink's veths through to them. It also installs TSLINK-WG-IN and syncs the veths' WireGuard port mappings (SyncPortMappings). IPv4 only: the veths have no other addresses than link-local IPv6 ones. It changes nothing that is in place, so it can run periodically.
func SyncPortMappings ¶ added in v0.2.1
func SyncPortMappings() error
SyncPortMappings maps the tailscaled behind each of the host's veths to a port of its own, unless it has one, and removes the mappings of addresses no veth has. It changes nothing that is in place, so it can run periodically: it maps containers whose veth an older version set up, and removes the mappings of veths that went away with their container.
func UsedVethSubnets ¶
UsedVethSubnets returns the /30 subnets in tslink's veth range that links of the current network namespace have addresses in.
Types ¶
type HostEndpointsConfig ¶ added in v0.2.2
HostEndpointsConfig selects the addresses tslink nodes advertise: none if Off, Addrs if given, and otherwise the host's private addresses.
type PortRange ¶ added in v0.2.1
type PortRange struct{ First, Last int }
PortRange is an inclusive range of ports.
func ParsePortRange ¶ added in v0.2.1
ParsePortRange parses "first-last", ports from 1024 to 65535.