v1beta2

type ContainerdOptions struct {
	// Config is an inline containerd configuration TOML that will be merged with the defaults.
	// +optional
	Config string `json:"config,omitempty"`

	// BaseRuntimeSpec is the OCI runtime specification upon which all containers will be based.
	// +optional
	// +kubebuilder:pruning:PreserveUnknownFields
	BaseRuntimeSpec *runtime.RawExtension `json:"baseRuntimeSpec,omitempty"`
}

type DiskSetup struct {
	// Partitions specifies the list of the partitions to setup.
	// +optional
	Partitions []Partition `json:"partitions,omitempty"`

	// Filesystems specifies the list of file systems to setup.
	// +optional
	Filesystems []Filesystem `json:"filesystems,omitempty"`
}

type EKSConfig struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   EKSConfigSpec   `json:"spec,omitempty"`
	Status EKSConfigStatus `json:"status,omitempty"`
}

type EKSConfigList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []EKSConfig `json:"items"`
}

type EKSConfigSpec struct {
	// KubeletExtraArgs passes the specified kubelet args into the Amazon EKS machine bootstrap script
	// +optional
	KubeletExtraArgs map[string]string `json:"kubeletExtraArgs,omitempty"`
	// ContainerRuntime specify the container runtime to use when bootstrapping EKS.
	// +optional
	ContainerRuntime *string `json:"containerRuntime,omitempty"`
	//  DNSClusterIP overrides the IP address to use for DNS queries within the cluster.
	// +optional
	DNSClusterIP *string `json:"dnsClusterIP,omitempty"`
	// DockerConfigJson is used for the contents of the /etc/docker/daemon.json file. Useful if you want a custom config differing from the default one in the AMI.
	// This is expected to be a json string.
	// +optional
	DockerConfigJSON *string `json:"dockerConfigJson,omitempty"`
	// APIRetryAttempts is the number of retry attempts for AWS API call.
	// +optional
	APIRetryAttempts *int `json:"apiRetryAttempts,omitempty"`
	// PauseContainer allows customization of the pause container to use.
	// +optional
	PauseContainer *PauseContainer `json:"pauseContainer,omitempty"`
	// UseMaxPods  sets --max-pods for the kubelet when true.
	// +optional
	UseMaxPods *bool `json:"useMaxPods,omitempty"`
	// ServiceIPV6Cidr is the ipv6 cidr range of the cluster. If this is specified then
	// the ip family will be set to ipv6.
	// +optional
	ServiceIPV6Cidr *string `json:"serviceIPV6Cidr,omitempty"`
	// PreBootstrapCommands specifies extra commands to run before bootstrapping nodes to the cluster
	// +optional
	PreBootstrapCommands []string `json:"preBootstrapCommands,omitempty"`
	// PostBootstrapCommands specifies extra commands to run after bootstrapping nodes to the cluster
	// +optional
	PostBootstrapCommands []string `json:"postBootstrapCommands,omitempty"`
	// BootstrapCommandOverride allows you to override the bootstrap command to use for EKS nodes.
	// +optional
	BootstrapCommandOverride *string `json:"boostrapCommandOverride,omitempty"`
	// Files specifies extra files to be passed to user_data upon creation.
	// +optional
	Files []File `json:"files,omitempty"`
	// DiskSetup specifies options for the creation of partition tables and file systems on devices.
	// +optional
	DiskSetup *DiskSetup `json:"diskSetup,omitempty"`
	// Mounts specifies a list of mount points to be setup.
	// +optional
	Mounts []MountPoints `json:"mounts,omitempty"`
	// Users specifies extra users to add
	// +optional
	Users []User `json:"users,omitempty"`
	// NTP specifies NTP configuration
	// +optional
	NTP *NTP `json:"ntp,omitempty"`
}

type EKSConfigStatus struct {
	// Ready indicates the BootstrapData secret is ready to be consumed
	Ready bool `json:"ready,omitempty"`

	// DataSecretName is the name of the secret that stores the bootstrap data script.
	// +optional
	DataSecretName *string `json:"dataSecretName,omitempty"`

	// FailureReason will be set on non-retryable errors
	// +optional
	FailureReason string `json:"failureReason,omitempty"`

	// FailureMessage will be set on non-retryable errors
	// +optional
	FailureMessage string `json:"failureMessage,omitempty"`

	// ObservedGeneration is the latest generation observed by the controller.
	// +optional
	ObservedGeneration int64 `json:"observedGeneration,omitempty"`

	// Conditions defines current service state of the EKSConfig.
	// +optional
	Conditions clusterv1.Conditions `json:"conditions,omitempty"`
}

type EKSConfigTemplate struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec EKSConfigTemplateSpec `json:"spec,omitempty"`
}

type EKSConfigTemplateList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []EKSConfigTemplate `json:"items"`
}

type EKSConfigTemplateResource struct {
	Spec EKSConfigSpec `json:"spec,omitempty"`
}

type EKSConfigTemplateSpec struct {
	Template EKSConfigTemplateResource `json:"template"`
}

type Encoding string

type Feature string

type File struct {
	// Path specifies the full path on disk where to store the file.
	Path string `json:"path"`

	// Owner specifies the ownership of the file, e.g. "root:root".
	// +optional
	Owner string `json:"owner,omitempty"`

	// Permissions specifies the permissions to assign to the file, e.g. "0640".
	// +optional
	Permissions string `json:"permissions,omitempty"`

	// Encoding specifies the encoding of the file contents.
	// +optional
	Encoding Encoding `json:"encoding,omitempty"`

	// Append specifies whether to append Content to existing file if Path exists.
	// +optional
	Append bool `json:"append,omitempty"`

	// Content is the actual content of the file.
	// +optional
	Content string `json:"content,omitempty"`

	// ContentFrom is a referenced source of content to populate the file.
	// +optional
	ContentFrom *FileSource `json:"contentFrom,omitempty"`
}

type FileSource struct {
	// Secret represents a secret that should populate this file.
	Secret SecretFileSource `json:"secret"`
}

type Filesystem struct {
	// Device specifies the device name
	Device string `json:"device"`
	// Filesystem specifies the file system type.
	Filesystem string `json:"filesystem"`
	// Label specifies the file system label to be used. If set to None, no label is used.
	Label string `json:"label"`
	// Partition specifies the partition to use. The valid options are: "auto|any", "auto", "any", "none", and <NUM>, where NUM is the actual partition number.
	// +optional
	Partition *string `json:"partition,omitempty"`
	// Overwrite defines whether or not to overwrite any existing filesystem.
	// If true, any pre-existing file system will be destroyed. Use with Caution.
	// +optional
	Overwrite *bool `json:"overwrite,omitempty"`
	// ExtraOpts defined extra options to add to the command for creating the file system.
	// +optional
	ExtraOpts []string `json:"extraOpts,omitempty"`
}

type KubeletOptions struct {
	// Config is a KubeletConfiguration that will be merged with the defaults.
	// +optional
	// +kubebuilder:pruning:PreserveUnknownFields
	Config *runtime.RawExtension `json:"config,omitempty"`

	// Flags are command-line kubelet arguments that will be appended to the defaults.
	// +optional
	Flags []string `json:"flags,omitempty"`
}

type MountPoints []string

type NTP struct {
	// Servers specifies which NTP servers to use
	// +optional
	Servers []string `json:"servers,omitempty"`

	// Enabled specifies whether NTP should be enabled
	// +optional
	Enabled *bool `json:"enabled,omitempty"`
}

type NodeadmConfig struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   NodeadmConfigSpec   `json:"spec,omitempty"`
	Status NodeadmConfigStatus `json:"status,omitempty"`
}

type NodeadmConfigList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []NodeadmConfig `json:"items"`
}

type NodeadmConfigSpec struct {
	// Kubelet contains options for kubelet.
	// +optional
	Kubelet *KubeletOptions `json:"kubelet,omitempty"`

	// Containerd contains options for containerd.
	// +optional
	Containerd *ContainerdOptions `json:"containerd,omitempty"`

	// FeatureGates holds key-value pairs to enable or disable application features.
	// +optional
	FeatureGates map[Feature]bool `json:"featureGates,omitempty"`

	// PreNodeadmCommands specifies extra commands to run before bootstrapping nodes.
	// +optional
	PreNodeadmCommands []string `json:"preNodeadmCommands,omitempty"`

	// Files specifies extra files to be passed to user_data upon creation.
	// +optional
	Files []File `json:"files,omitempty"`

	// Users specifies extra users to add.
	// +optional
	Users []User `json:"users,omitempty"`

	// NTP specifies NTP configuration.
	// +optional
	NTP *NTP `json:"ntp,omitempty"`

	// DiskSetup specifies options for the creation of partition tables and file systems on devices.
	// +optional
	DiskSetup *DiskSetup `json:"diskSetup,omitempty"`

	// Mounts specifies a list of mount points to be setup.
	// +optional
	Mounts []MountPoints `json:"mounts,omitempty"`
}

type NodeadmConfigStatus struct {
	// Ready indicates the BootstrapData secret is ready to be consumed.
	// +optional
	Ready bool `json:"ready,omitempty"`

	// DataSecretName is the name of the secret that stores the bootstrap data script.
	// +optional
	DataSecretName *string `json:"dataSecretName,omitempty"`

	// FailureReason will be set on non-retryable errors.
	// +optional
	FailureReason string `json:"failureReason,omitempty"`

	// FailureMessage will be set on non-retryable errors.
	// +optional
	FailureMessage string `json:"failureMessage,omitempty"`

	// ObservedGeneration is the latest generation observed by the controller.
	// +optional
	ObservedGeneration int64 `json:"observedGeneration,omitempty"`

	// Conditions defines current service state of the NodeadmConfig.
	// +optional
	Conditions clusterv1.Conditions `json:"conditions,omitempty"`
}

type NodeadmConfigTemplate struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec NodeadmConfigTemplateSpec `json:"spec,omitempty"`
}

type NodeadmConfigTemplateList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []NodeadmConfigTemplate `json:"items"`
}

type NodeadmConfigTemplateResource struct {
	Spec NodeadmConfigSpec `json:"spec,omitempty"`
}

type NodeadmConfigTemplateSpec struct {
	Template NodeadmConfigTemplateResource `json:"template"`
}

type Partition struct {
	// Device is the name of the device.
	Device string `json:"device"`
	// Layout specifies the device layout.
	// If it is true, a single partition will be created for the entire device.
	// When layout is false, it means don't partition or ignore existing partitioning.
	Layout bool `json:"layout"`
	// Overwrite describes whether to skip checks and create the partition if a partition or filesystem is found on the device.
	// Use with caution. Default is 'false'.
	// +optional
	Overwrite *bool `json:"overwrite,omitempty"`
	// TableType specifies the tupe of partition table. The following are supported:
	// 'mbr': default and setups a MS-DOS partition table
	// 'gpt': setups a GPT partition table
	// +optional
	TableType *string `json:"tableType,omitempty"`
}

type PasswdSource struct {
	// Secret represents a secret that should populate this password.
	Secret SecretPasswdSource `json:"secret"`
}

type PauseContainer struct {
	//  AccountNumber is the AWS account number to pull the pause container from.
	AccountNumber string `json:"accountNumber"`
	// Version is the tag of the pause container to use.
	Version string `json:"version"`
}

type SecretFileSource struct {
	// Name of the secret in the KubeadmBootstrapConfig's namespace to use.
	Name string `json:"name"`

	// Key is the key in the secret's data map for this value.
	Key string `json:"key"`
}

type SecretPasswdSource struct {
	// Name of the secret in the KubeadmBootstrapConfig's namespace to use.
	Name string `json:"name"`

	// Key is the key in the secret's data map for this value.
	Key string `json:"key"`
}

type User struct {
	// Name specifies the username
	Name string `json:"name"`

	// Gecos specifies the gecos to use for the user
	// +optional
	Gecos *string `json:"gecos,omitempty"`

	// Groups specifies the additional groups for the user
	// +optional
	Groups *string `json:"groups,omitempty"`

	// HomeDir specifies the home directory to use for the user
	// +optional
	HomeDir *string `json:"homeDir,omitempty"`

	// Inactive specifies whether to mark the user as inactive
	// +optional
	Inactive *bool `json:"inactive,omitempty"`

	// Shell specifies the user's shell
	// +optional
	Shell *string `json:"shell,omitempty"`

	// Passwd specifies a hashed password for the user
	// +optional
	Passwd *string `json:"passwd,omitempty"`

	// PasswdFrom is a referenced source of passwd to populate the passwd.
	// +optional
	PasswdFrom *PasswdSource `json:"passwdFrom,omitempty"`

	// PrimaryGroup specifies the primary group for the user
	// +optional
	PrimaryGroup *string `json:"primaryGroup,omitempty"`

	// LockPassword specifies if password login should be disabled
	// +optional
	LockPassword *bool `json:"lockPassword,omitempty"`

	// Sudo specifies a sudo role for the user
	// +optional
	Sudo *string `json:"sudo,omitempty"`

	// SSHAuthorizedKeys specifies a list of ssh authorized keys for the user
	// +optional
	SSHAuthorizedKeys []string `json:"sshAuthorizedKeys,omitempty"`
}