v1

type AWSCSIDriverConfigSpec struct {
	// kmsKeyARN sets the cluster default storage class to encrypt volumes with a user-defined KMS key,
	// rather than the default KMS key used by AWS.
	// The value may be either the ARN or Alias ARN of a KMS key.
	// +kubebuilder:validation:Pattern:=`^arn:(aws|aws-cn|aws-us-gov):kms:[a-z0-9-]+:[0-9]{12}:(key|alias)\/.*$`
	// +optional
	KMSKeyARN string `json:"kmsKeyARN,omitempty"`
}

type AWSClassicLoadBalancerParameters struct {
	// connectionIdleTimeout specifies the maximum time period that a
	// connection may be idle before the load balancer closes the
	// connection.  The value must be parseable as a time duration value;
	// see <https://pkg.go.dev/time#ParseDuration>.  A nil or zero value
	// means no opinion, in which case a default value is used.  The default
	// value for this field is 60s.  This default is subject to change.
	//
	// +kubebuilder:validation:Optional
	// +kubebuilder:validation:Format=duration
	// +optional
	ConnectionIdleTimeout metav1.Duration `json:"connectionIdleTimeout,omitempty"`
}

type AWSLoadBalancerParameters struct {
	// type is the type of AWS load balancer to instantiate for an ingresscontroller.
	//
	// Valid values are:
	//
	// * "Classic": A Classic Load Balancer that makes routing decisions at either
	//   the transport layer (TCP/SSL) or the application layer (HTTP/HTTPS). See
	//   the following for additional details:
	//
	//     https://docs.aws.amazon.com/AmazonECS/latest/developerguide/load-balancer-types.html#clb
	//
	// * "NLB": A Network Load Balancer that makes routing decisions at the
	//   transport layer (TCP/SSL). See the following for additional details:
	//
	//     https://docs.aws.amazon.com/AmazonECS/latest/developerguide/load-balancer-types.html#nlb
	//
	// +unionDiscriminator
	// +kubebuilder:validation:Required
	// +required
	Type AWSLoadBalancerType `json:"type"`

	// classicLoadBalancerParameters holds configuration parameters for an AWS
	// classic load balancer. Present only if type is Classic.
	//
	// +optional
	ClassicLoadBalancerParameters *AWSClassicLoadBalancerParameters `json:"classicLoadBalancer,omitempty"`

	// networkLoadBalancerParameters holds configuration parameters for an AWS
	// network load balancer. Present only if type is NLB.
	//
	// +optional
	NetworkLoadBalancerParameters *AWSNetworkLoadBalancerParameters `json:"networkLoadBalancer,omitempty"`
}

type AWSLoadBalancerType string

type AWSNetworkLoadBalancerParameters struct {
}

type AccessLogging struct {
	// destination is where access logs go.
	//
	// +kubebuilder:validation:Required
	// +required
	Destination LoggingDestination `json:"destination"`

	// httpLogFormat specifies the format of the log message for an HTTP
	// request.
	//
	// If this field is empty, log messages use the implementation's default
	// HTTP log format.  For HAProxy's default HTTP log format, see the
	// HAProxy documentation:
	// http://cbonte.github.io/haproxy-dconv/2.0/configuration.html#8.2.3
	//
	// Note that this format only applies to cleartext HTTP connections
	// and to secure HTTP connections for which the ingress controller
	// terminates encryption (that is, edge-terminated or reencrypt
	// connections).  It does not affect the log format for TLS passthrough
	// connections.
	//
	// +optional
	HttpLogFormat string `json:"httpLogFormat,omitempty"`

	// httpCaptureHeaders defines HTTP headers that should be captured in
	// access logs.  If this field is empty, no headers are captured.
	//
	// Note that this option only applies to cleartext HTTP connections
	// and to secure HTTP connections for which the ingress controller
	// terminates encryption (that is, edge-terminated or reencrypt
	// connections).  Headers cannot be captured for TLS passthrough
	// connections.
	//
	// +optional
	HTTPCaptureHeaders IngressControllerCaptureHTTPHeaders `json:"httpCaptureHeaders,omitempty"`

	// httpCaptureCookies specifies HTTP cookies that should be captured in
	// access logs.  If this field is empty, no cookies are captured.
	//
	// +nullable
	// +optional
	// +kubebuilder:validation:MaxItems=1
	HTTPCaptureCookies []IngressControllerCaptureHTTPCookie `json:"httpCaptureCookies,omitempty"`

	// logEmptyRequests specifies how connections on which no request is
	// received should be logged.  Typically, these empty requests come from
	// load balancers' health probes or Web browsers' speculative
	// connections ("preconnect"), in which case logging these requests may
	// be undesirable.  However, these requests may also be caused by
	// network errors, in which case logging empty requests may be useful
	// for diagnosing the errors.  In addition, these requests may be caused
	// by port scans, in which case logging empty requests may aid in
	// detecting intrusion attempts.  Allowed values for this field are
	// "Log" and "Ignore".  The default value is "Log".
	//
	// +optional
	// +kubebuilder:default:="Log"
	LogEmptyRequests LoggingPolicy `json:"logEmptyRequests,omitempty"`
}

type AddPage struct {
	// disabledActions is a list of actions that are not shown to users.
	// Each action in the list is represented by its ID.
	// +kubebuilder:validation:Optional
	// +kubebuilder:validation:MinItems=1
	// +optional
	DisabledActions []string `json:"disabledActions,omitempty"`
}

type AdditionalNetworkDefinition struct {
	// type is the type of network
	// The supported values are NetworkTypeRaw, NetworkTypeSimpleMacvlan
	Type NetworkType `json:"type"`

	// name is the name of the network. This will be populated in the resulting CRD
	// This must be unique.
	Name string `json:"name"`

	// namespace is the namespace of the network. This will be populated in the resulting CRD
	// If not given the network will be created in the default namespace.
	Namespace string `json:"namespace,omitempty"`

	// rawCNIConfig is the raw CNI configuration json to create in the
	// NetworkAttachmentDefinition CRD
	RawCNIConfig string `json:"rawCNIConfig,omitempty"`

	// SimpleMacvlanConfig configures the macvlan interface in case of type:NetworkTypeSimpleMacvlan
	// +optional
	SimpleMacvlanConfig *SimpleMacvlanConfig `json:"simpleMacvlanConfig,omitempty"`
}

type Authentication struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ObjectMeta `json:"metadata,omitempty"`

	// +kubebuilder:validation:Required
	// +required
	Spec AuthenticationSpec `json:"spec,omitempty"`
	// +optional
	Status AuthenticationStatus `json:"status,omitempty"`
}

type AuthenticationList struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard list's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ListMeta `json:"metadata"`

	Items []Authentication `json:"items"`
}

type AuthenticationSpec struct {
	OperatorSpec `json:",inline"`
}

type AuthenticationStatus struct {
	// OAuthAPIServer holds status specific only to oauth-apiserver
	// +optional
	OAuthAPIServer OAuthAPIServerStatus `json:"oauthAPIServer,omitempty"`

	OperatorStatus `json:",inline"`
}

type AzureCSIDriverConfigSpec struct {
	// diskEncryptionSet sets the cluster default storage class to encrypt volumes with a
	// customer-managed encryption set, rather than the default platform-managed keys.
	// +optional
	DiskEncryptionSet *AzureDiskEncryptionSet `json:"diskEncryptionSet,omitempty"`
}

type AzureDiskEncryptionSet struct {
	// subscriptionID defines the Azure subscription that contains the disk encryption set.
	// The value should meet the following conditions:
	// 1. It should be a 128-bit number.
	// 2. It should be 36 characters (32 hexadecimal characters and 4 hyphens) long.
	// 3. It should be displayed in five groups separated by hyphens (-).
	// 4. The first group should be 8 characters long.
	// 5. The second, third, and fourth groups should be 4 characters long.
	// 6. The fifth group should be 12 characters long.
	// An Example SubscrionID: f2007bbf-f802-4a47-9336-cf7c6b89b378
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:MaxLength:=36
	// +kubebuilder:validation:Pattern:=`^[a-fA-F0-9]{8}-[a-fA-F0-9]{4}-[a-fA-F0-9]{4}-[a-fA-F0-9]{4}-[a-fA-F0-9]{12}$`
	SubscriptionID string `json:"subscriptionID"`

	// resourceGroup defines the Azure resource group that contains the disk encryption set.
	// The value should consist of only alphanumberic characters,
	// underscores (_), parentheses, hyphens and periods.
	// The value should not end in a period and be at most 90 characters in
	// length.
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:MaxLength:=90
	// +kubebuilder:validation:Pattern:=`^[\w\.\-\(\)]*[\w\-\(\)]$`
	ResourceGroup string `json:"resourceGroup"`

	// name is the name of the disk encryption set that will be set on the default storage class.
	// The value should consist of only alphanumberic characters,
	// underscores (_), hyphens, and be at most 80 characters in length.
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:MaxLength:=80
	// +kubebuilder:validation:Pattern:=`^[a-zA-Z0-9\_-]+$`
	Name string `json:"name"`
}

type Brand string

type CIDR string

type CSIDriverConfigSpec struct {
	// driverType indicates type of CSI driver for which the
	// driverConfig is being applied to.
	// Valid values are: AWS, Azure, GCP, vSphere and omitted.
	// Consumers should treat unknown values as a NO-OP.
	// +kubebuilder:validation:Required
	// +unionDiscriminator
	DriverType CSIDriverType `json:"driverType"`

	// aws is used to configure the AWS CSI driver.
	// +optional
	AWS *AWSCSIDriverConfigSpec `json:"aws,omitempty"`

	// azure is used to configure the Azure CSI driver.
	// +optional
	Azure *AzureCSIDriverConfigSpec `json:"azure,omitempty"`

	// gcp is used to configure the GCP CSI driver.
	// +optional
	GCP *GCPCSIDriverConfigSpec `json:"gcp,omitempty"`

	// vsphere is used to configure the vsphere CSI driver.
	// +optional
	VSphere *VSphereCSIDriverConfigSpec `json:"vSphere,omitempty"`
}

type CSIDriverName string

type CSIDriverType string

type CSISnapshotController struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ObjectMeta `json:"metadata,omitempty"`

	// spec holds user settable values for configuration
	// +kubebuilder:validation:Required
	// +required
	Spec CSISnapshotControllerSpec `json:"spec"`

	// status holds observed values from the cluster. They may not be overridden.
	// +optional
	Status CSISnapshotControllerStatus `json:"status"`
}

type CSISnapshotControllerList struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard list's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ListMeta `json:"metadata,omitempty"`

	Items []CSISnapshotController `json:"items"`
}

type CSISnapshotControllerSpec struct {
	OperatorSpec `json:",inline"`
}

type CSISnapshotControllerStatus struct {
	OperatorStatus `json:",inline"`
}

type CatalogTypesState string

type ClientCertificatePolicy string

type ClientTLS struct {
	// clientCertificatePolicy specifies whether the ingress controller
	// requires clients to provide certificates.  This field accepts the
	// values "Required" or "Optional".
	//
	// Note that the ingress controller only checks client certificates for
	// edge-terminated and reencrypt TLS routes; it cannot check
	// certificates for cleartext HTTP or passthrough TLS routes.
	//
	// +kubebuilder:validation:Required
	// +required
	ClientCertificatePolicy ClientCertificatePolicy `json:"clientCertificatePolicy"`

	// clientCA specifies a configmap containing the PEM-encoded CA
	// certificate bundle that should be used to verify a client's
	// certificate.  The administrator must create this configmap in the
	// openshift-config namespace.
	//
	// +kubebuilder:validation:Required
	// +required
	ClientCA configv1.ConfigMapNameReference `json:"clientCA"`

	// allowedSubjectPatterns specifies a list of regular expressions that
	// should be matched against the distinguished name on a valid client
	// certificate to filter requests.  The regular expressions must use
	// PCRE syntax.  If this list is empty, no filtering is performed.  If
	// the list is nonempty, then at least one pattern must match a client
	// certificate's distinguished name or else the ingress controller
	// rejects the certificate and denies the connection.
	//
	// +listType=atomic
	// +optional
	AllowedSubjectPatterns []string `json:"allowedSubjectPatterns,omitempty"`
}

type CloudCredential struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ObjectMeta `json:"metadata,omitempty"`

	// +kubebuilder:validation:Required
	// +required
	Spec CloudCredentialSpec `json:"spec"`
	// +optional
	Status CloudCredentialStatus `json:"status"`
}

type CloudCredentialList struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard list's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ListMeta `json:"metadata"`

	Items []CloudCredential `json:"items"`
}

type CloudCredentialSpec struct {
	OperatorSpec `json:",inline"`
	// CredentialsMode allows informing CCO that it should not attempt to dynamically
	// determine the root cloud credentials capabilities, and it should just run in
	// the specified mode.
	// It also allows putting the operator into "manual" mode if desired.
	// Leaving the field in default mode runs CCO so that the cluster's cloud credentials
	// will be dynamically probed for capabilities (on supported clouds/platforms).
	// Supported modes:
	//   AWS/Azure/GCP: "" (Default), "Mint", "Passthrough", "Manual"
	//   Others: Do not set value as other platforms only support running in "Passthrough"
	// +optional
	CredentialsMode CloudCredentialsMode `json:"credentialsMode,omitempty"`
}

type CloudCredentialStatus struct {
	OperatorStatus `json:",inline"`
}

type CloudCredentialsMode string

type ClusterCSIDriver struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ObjectMeta `json:"metadata,omitempty"`

	// spec holds user settable values for configuration
	// +kubebuilder:validation:Required
	// +required
	Spec ClusterCSIDriverSpec `json:"spec"`

	// status holds observed values from the cluster. They may not be overridden.
	// +optional
	Status ClusterCSIDriverStatus `json:"status"`
}

type ClusterCSIDriverList struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard list's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ListMeta `json:"metadata,omitempty"`

	Items []ClusterCSIDriver `json:"items"`
}

type ClusterCSIDriverSpec struct {
	OperatorSpec `json:",inline"`
	// StorageClassState determines if CSI operator should create and manage storage classes.
	// If this field value is empty or Managed - CSI operator will continuously reconcile
	// storage class and create if necessary.
	// If this field value is Unmanaged - CSI operator will not reconcile any previously created
	// storage class.
	// If this field value is Removed - CSI operator will delete the storage class it created previously.
	// When omitted, this means the user has no opinion and the platform chooses a reasonable default,
	// which is subject to change over time.
	// The current default behaviour is Managed.
	// +optional
	StorageClassState StorageClassStateName `json:"storageClassState,omitempty"`

	// driverConfig can be used to specify platform specific driver configuration.
	// When omitted, this means no opinion and the platform is left to choose reasonable
	// defaults. These defaults are subject to change over time.
	// +optional
	DriverConfig CSIDriverConfigSpec `json:"driverConfig"`
}

type ClusterCSIDriverStatus struct {
	OperatorStatus `json:",inline"`
}

type ClusterNetworkEntry struct {
	CIDR string `json:"cidr"`
	// +kubebuilder:validation:Minimum=0
	// +optional
	HostPrefix uint32 `json:"hostPrefix,omitempty"`
}

type CompressionMIMEType string

type ConditionStatus string

type Config struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ObjectMeta `json:"metadata"`

	// spec is the specification of the desired behavior of the Config Operator.
	// +kubebuilder:validation:Required
	// +required
	Spec ConfigSpec `json:"spec"`

	// status defines the observed status of the Config Operator.
	// +optional
	Status ConfigStatus `json:"status"`
}

type ConfigList struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard list's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ListMeta `json:"metadata"`

	// Items contains the items
	Items []Config `json:"items"`
}

type ConfigSpec struct {
	OperatorSpec `json:",inline"`
}

type ConfigStatus struct {
	OperatorStatus `json:",inline"`
}

type Console struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ObjectMeta `json:"metadata,omitempty"`

	// +kubebuilder:validation:Required
	// +required
	Spec ConsoleSpec `json:"spec,omitempty"`
	// +optional
	Status ConsoleStatus `json:"status,omitempty"`
}

type ConsoleConfigRoute struct {
	// hostname is the desired custom domain under which console will be available.
	Hostname string `json:"hostname"`
	// secret points to secret in the openshift-config namespace that contains custom
	// certificate and key and needs to be created manually by the cluster admin.
	// Referenced Secret is required to contain following key value pairs:
	// - "tls.crt" - to specifies custom certificate
	// - "tls.key" - to specifies private key of the custom certificate
	// If the custom hostname uses the default routing suffix of the cluster,
	// the Secret specification for a serving certificate will not be needed.
	// +optional
	Secret configv1.SecretNameReference `json:"secret"`
}

type ConsoleCustomization struct {
	// brand is the default branding of the web console which can be overridden by
	// providing the brand field.  There is a limited set of specific brand options.
	// This field controls elements of the console such as the logo.
	// Invalid value will prevent a console rollout.
	// +kubebuilder:validation:Enum:=openshift;okd;online;ocp;dedicated;azure;OpenShift;OKD;Online;OCP;Dedicated;Azure;ROSA
	Brand Brand `json:"brand,omitempty"`
	// documentationBaseURL links to external documentation are shown in various sections
	// of the web console.  Providing documentationBaseURL will override the default
	// documentation URL.
	// Invalid value will prevent a console rollout.
	// +kubebuilder:validation:Pattern=`^$|^((https):\/\/?)[^\s()<>]+(?:\([\w\d]+\)|([^[:punct:]\s]|\/?))\/$`
	DocumentationBaseURL string `json:"documentationBaseURL,omitempty"`
	// customProductName is the name that will be displayed in page titles, logo alt text, and the about dialog
	// instead of the normal OpenShift product name.
	// +optional
	CustomProductName string `json:"customProductName,omitempty"`
	// customLogoFile replaces the default OpenShift logo in the masthead and about dialog. It is a reference to a
	// ConfigMap in the openshift-config namespace. This can be created with a command like
	// 'oc create configmap custom-logo --from-file=/path/to/file -n openshift-config'.
	// Image size must be less than 1 MB due to constraints on the ConfigMap size.
	// The ConfigMap key should include a file extension so that the console serves the file
	// with the correct MIME type.
	// Recommended logo specifications:
	// Dimensions: Max height of 68px and max width of 200px
	// SVG format preferred
	// +optional
	CustomLogoFile configv1.ConfigMapFileReference `json:"customLogoFile,omitempty"`
	// developerCatalog allows to configure the shown developer catalog categories (filters) and types (sub-catalogs).
	// +kubebuilder:validation:Optional
	// +optional
	DeveloperCatalog DeveloperConsoleCatalogCustomization `json:"developerCatalog,omitempty"`
	// projectAccess allows customizing the available list of ClusterRoles in the Developer perspective
	// Project access page which can be used by a project admin to specify roles to other users and
	// restrict access within the project. If set, the list will replace the default ClusterRole options.
	// +kubebuilder:validation:Optional
	// +optional
	ProjectAccess ProjectAccess `json:"projectAccess,omitempty"`
	// quickStarts allows customization of available ConsoleQuickStart resources in console.
	// +kubebuilder:validation:Optional
	// +optional
	QuickStarts QuickStarts `json:"quickStarts,omitempty"`
	// addPage allows customizing actions on the Add page in developer perspective.
	// +kubebuilder:validation:Optional
	// +optional
	AddPage AddPage `json:"addPage,omitempty"`
	// perspectives allows enabling/disabling of perspective(s) that user can see in the Perspective switcher dropdown.
	// +listType=map
	// +listMapKey=id
	// +optional
	Perspectives []Perspective `json:"perspectives"`
}

type ConsoleList struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard list's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ListMeta `json:"metadata"`

	Items []Console `json:"items"`
}

type ConsoleProviders struct {
	// statuspage contains ID for statuspage.io page that provides status info about.
	// +optional
	Statuspage *StatuspageProvider `json:"statuspage,omitempty"`
}

type ConsoleSpec struct {
	OperatorSpec `json:",inline"`
	// customization is used to optionally provide a small set of
	// customization options to the web console.
	// +optional
	Customization ConsoleCustomization `json:"customization"`
	// providers contains configuration for using specific service providers.
	Providers ConsoleProviders `json:"providers"`
	// route contains hostname and secret reference that contains the serving certificate.
	// If a custom route is specified, a new route will be created with the
	// provided hostname, under which console will be available.
	// In case of custom hostname uses the default routing suffix of the cluster,
	// the Secret specification for a serving certificate will not be needed.
	// In case of custom hostname points to an arbitrary domain, manual DNS configurations steps are necessary.
	// The default console route will be maintained to reserve the default hostname
	// for console if the custom route is removed.
	// If not specified, default route will be used.
	// DEPRECATED
	// +optional
	Route ConsoleConfigRoute `json:"route"`
	// plugins defines a list of enabled console plugin names.
	// +optional
	Plugins []string `json:"plugins,omitempty"`
}

type ConsoleStatus struct {
	OperatorStatus `json:",inline"`
}

type ContainerLoggingDestinationParameters struct {
	// maxLength is the maximum length of the log message.
	//
	// Valid values are integers in the range 480 to 8192, inclusive.
	//
	// When omitted, the default value is 1024.
	//
	// +kubebuilder:validation:Maximum=8192
	// +kubebuilder:validation:Minimum=480
	// +kubebuilder:default=1024
	// +default:=1024
	// +optional
	MaxLength int32 `json:"maxLength,omitempty"`
}

type CookieMatchType string

type DNS struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ObjectMeta `json:"metadata,omitempty"`

	// spec is the specification of the desired behavior of the DNS.
	Spec DNSSpec `json:"spec,omitempty"`
	// status is the most recently observed status of the DNS.
	Status DNSStatus `json:"status,omitempty"`
}

type DNSCache struct {
	// positiveTTL is optional and specifies the amount of time that a positive response should be cached.
	//
	// If configured, it must be a value of 1s (1 second) or greater up to a theoretical maximum of several years. This
	// field expects an unsigned duration string of decimal numbers, each with optional fraction and a unit suffix,
	// e.g. "100s", "1m30s", "12h30m10s". Values that are fractions of a second are rounded down to the nearest second.
	// If the configured value is less than 1s, the default value will be used.
	// If not configured, the value will be 0s and OpenShift will use a default value of 900 seconds unless noted
	// otherwise in the respective Corefile for your version of OpenShift. The default value of 900 seconds is subject
	// to change.
	// +kubebuilder:validation:Pattern=^(0|([0-9]+(\.[0-9]+)?(ns|us|µs|μs|ms|s|m|h))+)$
	// +kubebuilder:validation:Type:=string
	// +optional
	PositiveTTL metav1.Duration `json:"positiveTTL,omitempty"`

	// negativeTTL is optional and specifies the amount of time that a negative response should be cached.
	//
	// If configured, it must be a value of 1s (1 second) or greater up to a theoretical maximum of several years. This
	// field expects an unsigned duration string of decimal numbers, each with optional fraction and a unit suffix,
	// e.g. "100s", "1m30s", "12h30m10s". Values that are fractions of a second are rounded down to the nearest second.
	// If the configured value is less than 1s, the default value will be used.
	// If not configured, the value will be 0s and OpenShift will use a default value of 30 seconds unless noted
	// otherwise in the respective Corefile for your version of OpenShift. The default value of 30 seconds is subject
	// to change.
	// +kubebuilder:validation:Pattern=^(0|([0-9]+(\.[0-9]+)?(ns|us|µs|μs|ms|s|m|h))+)$
	// +kubebuilder:validation:Type:=string
	// +optional
	NegativeTTL metav1.Duration `json:"negativeTTL,omitempty"`
}

type DNSList struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard list's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ListMeta `json:"metadata,omitempty"`

	Items []DNS `json:"items"`
}

type DNSLogLevel string

type DNSNodePlacement struct {
	// nodeSelector is the node selector applied to DNS pods.
	//
	// If empty, the default is used, which is currently the following:
	//
	//   kubernetes.io/os: linux
	//
	// This default is subject to change.
	//
	// If set, the specified selector is used and replaces the default.
	//
	// +optional
	NodeSelector map[string]string `json:"nodeSelector,omitempty"`

	// tolerations is a list of tolerations applied to DNS pods.
	//
	// If empty, the DNS operator sets a toleration for the
	// "node-role.kubernetes.io/master" taint.  This default is subject to
	// change.  Specifying tolerations without including a toleration for
	// the "node-role.kubernetes.io/master" taint may be risky as it could
	// lead to an outage if all worker nodes become unavailable.
	//
	// Note that the daemon controller adds some tolerations as well.  See
	// https://kubernetes.io/docs/concepts/scheduling-eviction/taint-and-toleration/
	//
	// +optional
	Tolerations []corev1.Toleration `json:"tolerations,omitempty"`
}

type DNSOverTLSConfig struct {
	// serverName is the upstream server to connect to when forwarding DNS queries. This is required when Transport is
	// set to "TLS". ServerName will be validated against the DNS naming conventions in RFC 1123 and should match the
	// TLS certificate installed in the upstream resolver(s).
	//
	// + ---
	// + Inspired by the DNS1123 patterns in Kubernetes: https://github.com/kubernetes/kubernetes/blob/7c46f40bdf89a437ecdbc01df45e235b5f6d9745/staging/src/k8s.io/apimachinery/pkg/util/validation/validation.go#L178-L218
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:MaxLength=253
	// +kubebuilder:validation:Pattern=`^([a-zA-Z0-9]|[a-zA-Z0-9][a-zA-Z0-9\-]{0,61}[a-zA-Z0-9])(\.([a-zA-Z0-9]|[a-zA-Z0-9][a-zA-Z0-9\-]{0,61}[a-zA-Z0-9]))*$`
	ServerName string `json:"serverName"`

	// caBundle references a ConfigMap that must contain either a single
	// CA Certificate or a CA Bundle. This allows cluster administrators to provide their
	// own CA or CA bundle for validating the certificate of upstream resolvers.
	//
	// 1. The configmap must contain a `ca-bundle.crt` key.
	// 2. The value must be a PEM encoded CA certificate or CA bundle.
	// 3. The administrator must create this configmap in the openshift-config namespace.
	// 4. The upstream server certificate must contain a Subject Alternative Name (SAN) that matches ServerName.
	//
	// +optional
	CABundle v1.ConfigMapNameReference `json:"caBundle,omitempty"`
}

type DNSSpec struct {
	// servers is a list of DNS resolvers that provide name query delegation for one or
	// more subdomains outside the scope of the cluster domain. If servers consists of
	// more than one Server, longest suffix match will be used to determine the Server.
	//
	// For example, if there are two Servers, one for "foo.com" and another for "a.foo.com",
	// and the name query is for "www.a.foo.com", it will be routed to the Server with Zone
	// "a.foo.com".
	//
	// If this field is nil, no servers are created.
	//
	// +optional
	Servers []Server `json:"servers,omitempty"`

	// upstreamResolvers defines a schema for configuring CoreDNS
	// to proxy DNS messages to upstream resolvers for the case of the
	// default (".") server
	//
	// If this field is not specified, the upstream used will default to
	// /etc/resolv.conf, with policy "sequential"
	//
	// +optional
	UpstreamResolvers UpstreamResolvers `json:"upstreamResolvers"`

	// nodePlacement provides explicit control over the scheduling of DNS
	// pods.
	//
	// Generally, it is useful to run a DNS pod on every node so that DNS
	// queries are always handled by a local DNS pod instead of going over
	// the network to a DNS pod on another node.  However, security policies
	// may require restricting the placement of DNS pods to specific nodes.
	// For example, if a security policy prohibits pods on arbitrary nodes
	// from communicating with the API, a node selector can be specified to
	// restrict DNS pods to nodes that are permitted to communicate with the
	// API.  Conversely, if running DNS pods on nodes with a particular
	// taint is desired, a toleration can be specified for that taint.
	//
	// If unset, defaults are used. See nodePlacement for more details.
	//
	// +optional
	NodePlacement DNSNodePlacement `json:"nodePlacement,omitempty"`

	// managementState indicates whether the DNS operator should manage cluster
	// DNS
	// +optional
	ManagementState ManagementState `json:"managementState,omitempty"`

	// operatorLogLevel controls the logging level of the DNS Operator.
	// Valid values are: "Normal", "Debug", "Trace".
	// Defaults to "Normal".
	// setting operatorLogLevel: Trace will produce extremely verbose logs.
	// +optional
	// +kubebuilder:default=Normal
	OperatorLogLevel DNSLogLevel `json:"operatorLogLevel,omitempty"`

	// logLevel describes the desired logging verbosity for CoreDNS.
	// Any one of the following values may be specified:
	// * Normal logs errors from upstream resolvers.
	// * Debug logs errors, NXDOMAIN responses, and NODATA responses.
	// * Trace logs errors and all responses.
	//  Setting logLevel: Trace will produce extremely verbose logs.
	// Valid values are: "Normal", "Debug", "Trace".
	// Defaults to "Normal".
	// +optional
	// +kubebuilder:default=Normal
	LogLevel DNSLogLevel `json:"logLevel,omitempty"`

	// cache describes the caching configuration that applies to all server blocks listed in the Corefile.
	// This field allows a cluster admin to optionally configure:
	// * positiveTTL which is a duration for which positive responses should be cached.
	// * negativeTTL which is a duration for which negative responses should be cached.
	// If this is not configured, OpenShift will configure positive and negative caching with a default value that is
	// subject to change. At the time of writing, the default positiveTTL is 900 seconds and the default negativeTTL is
	// 30 seconds or as noted in the respective Corefile for your version of OpenShift.
	// +optional
	Cache DNSCache `json:"cache,omitempty"`
}

type DNSStatus struct {
	// clusterIP is the service IP through which this DNS is made available.
	//
	// In the case of the default DNS, this will be a well known IP that is used
	// as the default nameserver for pods that are using the default ClusterFirst DNS policy.
	//
	// In general, this IP can be specified in a pod's spec.dnsConfig.nameservers list
	// or used explicitly when performing name resolution from within the cluster.
	// Example: dig foo.com @<service IP>
	//
	// More info: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
	//
	// +kubebuilder:validation:Required
	// +required
	ClusterIP string `json:"clusterIP"`

	// clusterDomain is the local cluster DNS domain suffix for DNS services.
	// This will be a subdomain as defined in RFC 1034,
	// section 3.5: https://tools.ietf.org/html/rfc1034#section-3.5
	// Example: "cluster.local"
	//
	// More info: https://kubernetes.io/docs/concepts/services-networking/dns-pod-service
	//
	// +kubebuilder:validation:Required
	// +required
	ClusterDomain string `json:"clusterDomain"`

	// conditions provide information about the state of the DNS on the cluster.
	//
	// These are the supported DNS conditions:
	//
	//   * Available
	//   - True if the following conditions are met:
	//     * DNS controller daemonset is available.
	//   - False if any of those conditions are unsatisfied.
	//
	// +patchMergeKey=type
	// +patchStrategy=merge
	// +optional
	Conditions []OperatorCondition `json:"conditions,omitempty" patchStrategy:"merge" patchMergeKey:"type"`
}

type DNSTransport string

type DNSTransportConfig struct {
	// transport allows cluster administrators to opt-in to using a DNS-over-TLS
	// connection between cluster DNS and an upstream resolver(s). Configuring
	// TLS as the transport at this level without configuring a CABundle will
	// result in the system certificates being used to verify the serving
	// certificate of the upstream resolver(s).
	//
	// Possible values:
	// "" (empty) - This means no explicit choice has been made and the platform chooses the default which is subject
	// to change over time. The current default is "Cleartext".
	// "Cleartext" - Cluster admin specified cleartext option. This results in the same functionality
	// as an empty value but may be useful when a cluster admin wants to be more explicit about the transport,
	// or wants to switch from "TLS" to "Cleartext" explicitly.
	// "TLS" - This indicates that DNS queries should be sent over a TLS connection. If Transport is set to TLS,
	// you MUST also set ServerName. If a port is not included with the upstream IP, port 853 will be tried by default
	// per RFC 7858 section 3.1; https://datatracker.ietf.org/doc/html/rfc7858#section-3.1.
	//
	// +optional
	// +unionDiscriminator
	Transport DNSTransport `json:"transport,omitempty"`

	// tls contains the additional configuration options to use when Transport is set to "TLS".
	TLS *DNSOverTLSConfig `json:"tls,omitempty"`
}

type DefaultNetworkDefinition struct {
	// type is the type of network
	// All NetworkTypes are supported except for NetworkTypeRaw
	Type NetworkType `json:"type"`

	// openShiftSDNConfig configures the openshift-sdn plugin
	// +optional
	OpenShiftSDNConfig *OpenShiftSDNConfig `json:"openshiftSDNConfig,omitempty"`

	// ovnKubernetesConfig configures the ovn-kubernetes plugin.
	// +optional
	OVNKubernetesConfig *OVNKubernetesConfig `json:"ovnKubernetesConfig,omitempty"`

	// KuryrConfig configures the kuryr plugin
	// +optional
	KuryrConfig *KuryrConfig `json:"kuryrConfig,omitempty"`
}

type DeveloperConsoleCatalogCategory struct {
	// defines top level category ID, label and filter tags.
	DeveloperConsoleCatalogCategoryMeta `json:",inline"`
	// subcategories defines a list of child categories.
	// +kubebuilder:validation:Optional
	// +optional
	Subcategories []DeveloperConsoleCatalogCategoryMeta `json:"subcategories,omitempty"`
}

type DeveloperConsoleCatalogCategoryMeta struct {
	// ID is an identifier used in the URL to enable deep linking in console.
	// ID is required and must have 1-32 URL safe (A-Z, a-z, 0-9, - and _) characters.
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:MinLength=1
	// +kubebuilder:validation:MaxLength=32
	// +kubebuilder:validation:Pattern=`^[A-Za-z0-9-_]+$`
	// +required
	ID string `json:"id"`
	// label defines a category display label. It is required and must have 1-64 characters.
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:MinLength=1
	// +kubebuilder:validation:MaxLength=64
	// +required
	Label string `json:"label"`
	// tags is a list of strings that will match the category. A selected category
	// show all items which has at least one overlapping tag between category and item.
	// +kubebuilder:validation:Optional
	// +optional
	Tags []string `json:"tags,omitempty"`
}

type DeveloperConsoleCatalogCustomization struct {
	// categories which are shown in the developer catalog.
	// +kubebuilder:validation:Optional
	// +optional
	Categories []DeveloperConsoleCatalogCategory `json:"categories,omitempty"`
	// types allows enabling or disabling of sub-catalog types that user can see in the Developer catalog.
	// When omitted, all the sub-catalog types will be shown.
	// +optional
	Types DeveloperConsoleCatalogTypes `json:"types,omitempty"`
}

type DeveloperConsoleCatalogTypes struct {
	// state defines if a list of catalog types should be enabled or disabled.
	// +unionDiscriminator
	// +kubebuilder:validation:Enum:="Enabled";"Disabled";
	// +kubebuilder:default:="Enabled"
	// +default="Enabled"
	// +kubebuilder:validation:Required
	State CatalogTypesState `json:"state,omitempty"`
	// enabled is a list of developer catalog types (sub-catalogs IDs) that will be shown to users.
	// Types (sub-catalogs) are added via console plugins, the available types (sub-catalog IDs) are available
	// in the console on the cluster configuration page, or when editing the YAML in the console.
	// Example: "Devfile", "HelmChart", "BuilderImage"
	// If the list is non-empty, a new type will not be shown to the user until it is added to list.
	// If the list is empty the complete developer catalog will be shown.
	// +listType=set
	// +unionMember,optional
	Enabled *[]string `json:"enabled,omitempty"`
	// disabled is a list of developer catalog types (sub-catalogs IDs) that are not shown to users.
	// Types (sub-catalogs) are added via console plugins, the available types (sub-catalog IDs) are available
	// in the console on the cluster configuration page, or when editing the YAML in the console.
	// Example: "Devfile", "HelmChart", "BuilderImage"
	// If the list is empty or all the available sub-catalog types are added, then the complete developer catalog should be hidden.
	// +listType=set
	// +unionMember,optional
	Disabled *[]string `json:"disabled,omitempty"`
}

type EgressIPConfig struct {
	// reachabilityTotalTimeout configures the EgressIP node reachability check total timeout in seconds.
	// If the EgressIP node cannot be reached within this timeout, the node is declared down.
	// Setting a large value may cause the EgressIP feature to react slowly to node changes.
	// In particular, it may react slowly for EgressIP nodes that really have a genuine problem and are unreachable.
	// When omitted, this means the user has no opinion and the platform is left to choose a reasonable default, which is subject to change over time.
	// The current default is 1 second.
	// A value of 0 disables the EgressIP node's reachability check.
	// +kubebuilder:validation:Minimum=0
	// +kubebuilder:validation:Maximum=60
	// +optional
	ReachabilityTotalTimeoutSeconds *uint32 `json:"reachabilityTotalTimeoutSeconds,omitempty"`
}

type EndpointPublishingStrategy struct {
	// type is the publishing strategy to use. Valid values are:
	//
	// * LoadBalancerService
	//
	// Publishes the ingress controller using a Kubernetes LoadBalancer Service.
	//
	// In this configuration, the ingress controller deployment uses container
	// networking. A LoadBalancer Service is created to publish the deployment.
	//
	// See: https://kubernetes.io/docs/concepts/services-networking/service/#loadbalancer
	//
	// If domain is set, a wildcard DNS record will be managed to point at the
	// LoadBalancer Service's external name. DNS records are managed only in DNS
	// zones defined by dns.config.openshift.io/cluster .spec.publicZone and
	// .spec.privateZone.
	//
	// Wildcard DNS management is currently supported only on the AWS, Azure,
	// and GCP platforms.
	//
	// * HostNetwork
	//
	// Publishes the ingress controller on node ports where the ingress controller
	// is deployed.
	//
	// In this configuration, the ingress controller deployment uses host
	// networking, bound to node ports 80 and 443. The user is responsible for
	// configuring an external load balancer to publish the ingress controller via
	// the node ports.
	//
	// * Private
	//
	// Does not publish the ingress controller.
	//
	// In this configuration, the ingress controller deployment uses container
	// networking, and is not explicitly published. The user must manually publish
	// the ingress controller.
	//
	// * NodePortService
	//
	// Publishes the ingress controller using a Kubernetes NodePort Service.
	//
	// In this configuration, the ingress controller deployment uses container
	// networking. A NodePort Service is created to publish the deployment. The
	// specific node ports are dynamically allocated by OpenShift; however, to
	// support static port allocations, user changes to the node port
	// field of the managed NodePort Service will preserved.
	//
	// +unionDiscriminator
	// +kubebuilder:validation:Required
	// +required
	Type EndpointPublishingStrategyType `json:"type"`

	// loadBalancer holds parameters for the load balancer. Present only if
	// type is LoadBalancerService.
	// +optional
	LoadBalancer *LoadBalancerStrategy `json:"loadBalancer,omitempty"`

	// hostNetwork holds parameters for the HostNetwork endpoint publishing
	// strategy. Present only if type is HostNetwork.
	// +optional
	HostNetwork *HostNetworkStrategy `json:"hostNetwork,omitempty"`

	// private holds parameters for the Private endpoint publishing
	// strategy. Present only if type is Private.
	// +optional
	Private *PrivateStrategy `json:"private,omitempty"`

	// nodePort holds parameters for the NodePortService endpoint publishing strategy.
	// Present only if type is NodePortService.
	// +optional
	NodePort *NodePortStrategy `json:"nodePort,omitempty"`
}

type EndpointPublishingStrategyType string

type Etcd struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ObjectMeta `json:"metadata"`

	// +kubebuilder:validation:Required
	// +required
	Spec EtcdSpec `json:"spec"`
	// +optional
	Status EtcdStatus `json:"status"`
}

type EtcdList struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard list's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ListMeta `json:"metadata"`

	// Items contains the items
	Items []Etcd `json:"items"`
}

type EtcdSpec struct {
	StaticPodOperatorSpec `json:",inline"`
}

type EtcdStatus struct {
	StaticPodOperatorStatus `json:",inline"`
}

type ExportNetworkFlows struct {
	// netFlow defines the NetFlow configuration.
	// +optional
	NetFlow *NetFlowConfig `json:"netFlow,omitempty"`
	// sFlow defines the SFlow configuration.
	// +optional
	SFlow *SFlowConfig `json:"sFlow,omitempty"`
	// ipfix defines IPFIX configuration.
	// +optional
	IPFIX *IPFIXConfig `json:"ipfix,omitempty"`
}

type FeaturesMigration struct {
	// egressIP specifies whether or not the Egress IP configuration is migrated
	// automatically when changing the cluster default network provider.
	// If unset, this property defaults to 'true' and Egress IP configure is migrated.
	// +optional
	// +kubebuilder:default:=true
	EgressIP bool `json:"egressIP,omitempty"`
	// egressFirewall specifies whether or not the Egress Firewall configuration is migrated
	// automatically when changing the cluster default network provider.
	// If unset, this property defaults to 'true' and Egress Firewall configure is migrated.
	// +optional
	// +kubebuilder:default:=true
	EgressFirewall bool `json:"egressFirewall,omitempty"`
	// multicast specifies whether or not the multicast configuration is migrated
	// automatically when changing the cluster default network provider.
	// If unset, this property defaults to 'true' and multicast configure is migrated.
	// +optional
	// +kubebuilder:default:=true
	Multicast bool `json:"multicast,omitempty"`
}

type ForwardPlugin struct {
	// upstreams is a list of resolvers to forward name queries for subdomains of Zones.
	// Each instance of CoreDNS performs health checking of Upstreams. When a healthy upstream
	// returns an error during the exchange, another resolver is tried from Upstreams. The
	// Upstreams are selected in the order specified in Policy. Each upstream is represented
	// by an IP address or IP:port if the upstream listens on a port other than 53.
	//
	// A maximum of 15 upstreams is allowed per ForwardPlugin.
	//
	// +kubebuilder:validation:MaxItems=15
	Upstreams []string `json:"upstreams"`

	// policy is used to determine the order in which upstream servers are selected for querying.
	// Any one of the following values may be specified:
	//
	// * "Random" picks a random upstream server for each query.
	// * "RoundRobin" picks upstream servers in a round-robin order, moving to the next server for each new query.
	// * "Sequential" tries querying upstream servers in a sequential order until one responds, starting with the first server for each new query.
	//
	// The default value is "Random"
	//
	// +optional
	// +kubebuilder:default:="Random"
	Policy ForwardingPolicy `json:"policy,omitempty"`

	// transportConfig is used to configure the transport type, server name, and optional custom CA or CA bundle to use
	// when forwarding DNS requests to an upstream resolver.
	//
	// The default value is "" (empty) which results in a standard cleartext connection being used when forwarding DNS
	// requests to an upstream resolver.
	//
	// +optional
	TransportConfig DNSTransportConfig `json:"transportConfig,omitempty"`

	// protocolStrategy specifies the protocol to use for upstream DNS
	// requests.
	// Valid values for protocolStrategy are "TCP" and omitted.
	// When omitted, this means no opinion and the platform is left to choose
	// a reasonable default, which is subject to change over time.
	// The current default is to use the protocol of the original client request.
	// "TCP" specifies that the platform should use TCP for all upstream DNS requests,
	// even if the client request uses UDP.
	// "TCP" is useful for UDP-specific issues such as those created by
	// non-compliant upstream resolvers, but may consume more bandwidth or
	// increase DNS response time. Note that protocolStrategy only affects
	// the protocol of DNS requests that CoreDNS makes to upstream resolvers.
	// It does not affect the protocol of DNS requests between clients and
	// CoreDNS.
	//
	// +optional
	ProtocolStrategy ProtocolStrategy `json:"protocolStrategy"`
}

type ForwardingPolicy string

type GCPCSIDriverConfigSpec struct {
	// kmsKey sets the cluster default storage class to encrypt volumes with customer-supplied
	// encryption keys, rather than the default keys managed by GCP.
	// +optional
	KMSKey *GCPKMSKeyReference `json:"kmsKey,omitempty"`
}

type GCPClientAccess string

type GCPKMSKeyReference struct {
	// name is the name of the customer-managed encryption key to be used for disk encryption.
	// The value should correspond to an existing KMS key and should
	// consist of only alphanumeric characters, hyphens (-) and underscores (_),
	// and be at most 63 characters in length.
	// +kubebuilder:validation:Pattern:=`^[a-zA-Z0-9\_-]+$`
	// +kubebuilder:validation:MinLength:=1
	// +kubebuilder:validation:MaxLength:=63
	// +kubebuilder:validation:Required
	Name string `json:"name"`

	// keyRing is the name of the KMS Key Ring which the KMS Key belongs to.
	// The value should correspond to an existing KMS key ring and should
	// consist of only alphanumeric characters, hyphens (-) and underscores (_),
	// and be at most 63 characters in length.
	// +kubebuilder:validation:Pattern:=`^[a-zA-Z0-9\_-]+$`
	// +kubebuilder:validation:MinLength:=1
	// +kubebuilder:validation:MaxLength:=63
	// +kubebuilder:validation:Required
	KeyRing string `json:"keyRing"`

	// projectID is the ID of the Project in which the KMS Key Ring exists.
	// It must be 6 to 30 lowercase letters, digits, or hyphens.
	// It must start with a letter. Trailing hyphens are prohibited.
	// +kubebuilder:validation:Pattern:=`^[a-z][a-z0-9-]+[a-z0-9]$`
	// +kubebuilder:validation:MinLength:=6
	// +kubebuilder:validation:MaxLength:=30
	// +kubebuilder:validation:Required
	ProjectID string `json:"projectID"`

	// location is the GCP location in which the Key Ring exists.
	// The value must match an existing GCP location, or "global".
	// Defaults to global, if not set.
	// +kubebuilder:validation:Pattern:=`^[a-zA-Z0-9\_-]+$`
	// +optional
	Location string `json:"location,omitempty"`
}

type GCPLoadBalancerParameters struct {
	// clientAccess describes how client access is restricted for internal
	// load balancers.
	//
	// Valid values are:
	// * "Global": Specifying an internal load balancer with Global client access
	//   allows clients from any region within the VPC to communicate with the load
	//   balancer.
	//
	//     https://cloud.google.com/kubernetes-engine/docs/how-to/internal-load-balancing#global_access
	//
	// * "Local": Specifying an internal load balancer with Local client access
	//   means only clients within the same region (and VPC) as the GCP load balancer
	//   can communicate with the load balancer. Note that this is the default behavior.
	//
	//     https://cloud.google.com/load-balancing/docs/internal#client_access
	//
	// +optional
	ClientAccess GCPClientAccess `json:"clientAccess,omitempty"`
}

type GatewayConfig struct {
	// RoutingViaHost allows pod egress traffic to exit via the ovn-k8s-mp0 management port
	// into the host before sending it out. If this is not set, traffic will always egress directly
	// from OVN to outside without touching the host stack. Setting this to true means hardware
	// offload will not be supported. Default is false if GatewayConfig is specified.
	// +kubebuilder:default:=false
	// +optional
	RoutingViaHost bool `json:"routingViaHost,omitempty"`
	// IPForwarding controls IP forwarding for all traffic on OVN-Kubernetes managed interfaces (such as br-ex).
	// By default this is set to Restricted, and Kubernetes related traffic is still forwarded appropriately, but other
	// IP traffic will not be routed by the OCP node. If there is a desire to allow the host to forward traffic across
	// OVN-Kubernetes managed interfaces, then set this field to "Global".
	// The supported values are "Restricted" and "Global".
	// +optional
	IPForwarding IPForwardingMode `json:"ipForwarding,omitempty"`
}

type GatherStatus struct {
	// lastGatherTime is the last time when Insights data gathering finished.
	// An empty value means that no data has been gathered yet.
	// +optional
	LastGatherTime metav1.Time `json:"lastGatherTime,omitempty"`
	// lastGatherDuration is the total time taken to process
	// all gatherers during the last gather event.
	// +optional
	// +kubebuilder:validation:Pattern="^0|([1-9][0-9]*(\\.[0-9]+)?(ns|us|µs|ms|s|m|h))+$"
	// +kubebuilder:validation:Type=string
	LastGatherDuration metav1.Duration `json:"lastGatherDuration,omitempty"`
	// gatherers is a list of active gatherers (and their statuses) in the last gathering.
	// +listType=atomic
	// +optional
	Gatherers []GathererStatus `json:"gatherers,omitempty"`
}

type GathererStatus struct {
	// conditions provide details on the status of each gatherer.
	// +listType=atomic
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:MinItems=1
	Conditions []metav1.Condition `json:"conditions"`
	// name is the name of the gatherer.
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:MaxLength=256
	// +kubebuilder:validation:MinLength=5
	Name string `json:"name"`
	// lastGatherDuration represents the time spent gathering.
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:Type=string
	// +kubebuilder:validation:Pattern="^([1-9][0-9]*(\\.[0-9]+)?(ns|us|µs|ms|s|m|h))+$"
	LastGatherDuration metav1.Duration `json:"lastGatherDuration"`
}

type GenerationStatus struct {
	// group is the group of the thing you're tracking
	Group string `json:"group"`
	// resource is the resource type of the thing you're tracking
	Resource string `json:"resource"`
	// namespace is where the thing you're tracking is
	Namespace string `json:"namespace"`
	// name is the name of the thing you're tracking
	Name string `json:"name"`
	// lastGeneration is the last generation of the workload controller involved
	LastGeneration int64 `json:"lastGeneration"`
	// hash is an optional field set for resources without generation that are content sensitive like secrets and configmaps
	Hash string `json:"hash"`
}

type HTTPCompressionPolicy struct {
	// mimeTypes is a list of MIME types that should have compression applied.
	// This list can be empty, in which case the ingress controller does not apply compression.
	//
	// Note: Not all MIME types benefit from compression, but HAProxy will still use resources
	// to try to compress if instructed to.  Generally speaking, text (html, css, js, etc.)
	// formats benefit from compression, but formats that are already compressed (image,
	// audio, video, etc.) benefit little in exchange for the time and cpu spent on compressing
	// again. See https://joehonton.medium.com/the-gzip-penalty-d31bd697f1a2
	//
	// +listType=set
	MimeTypes []CompressionMIMEType `json:"mimeTypes,omitempty"`
}

type HTTPEmptyRequestsPolicy string

type HealthCheck struct {
	// description provides basic description of the healtcheck.
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:MaxLength=2048
	// +kubebuilder:validation:MinLength=10
	Description string `json:"description"`
	// totalRisk of the healthcheck. Indicator of the total risk posed
	// by the detected issue; combination of impact and likelihood. The values can be from 1 to 4,
	// and the higher the number, the more important the issue.
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:Minimum=1
	// +kubebuilder:validation:Maximum=4
	TotalRisk int32 `json:"totalRisk"`
	// advisorURI provides the URL link to the Insights Advisor.
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:Pattern=`^https:\/\/\S+`
	AdvisorURI string `json:"advisorURI"`
	// state determines what the current state of the health check is.
	// Health check is enabled by default and can be disabled
	// by the user in the Insights advisor user interface.
	// +kubebuilder:validation:Required
	State HealthCheckState `json:"state"`
}

type HealthCheckState string

type HostNetworkStrategy struct {
	// protocol specifies whether the IngressController expects incoming
	// connections to use plain TCP or whether the IngressController expects
	// PROXY protocol.
	//
	// PROXY protocol can be used with load balancers that support it to
	// communicate the source addresses of client connections when
	// forwarding those connections to the IngressController.  Using PROXY
	// protocol enables the IngressController to report those source
	// addresses instead of reporting the load balancer's address in HTTP
	// headers and logs.  Note that enabling PROXY protocol on the
	// IngressController will cause connections to fail if you are not using
	// a load balancer that uses PROXY protocol to forward connections to
	// the IngressController.  See
	// http://www.haproxy.org/download/2.2/doc/proxy-protocol.txt for
	// information about PROXY protocol.
	//
	// The following values are valid for this field:
	//
	// * The empty string.
	// * "TCP".
	// * "PROXY".
	//
	// The empty string specifies the default, which is TCP without PROXY
	// protocol.  Note that the default is subject to change.
	//
	// +kubebuilder:validation:Optional
	// +optional
	Protocol IngressControllerProtocol `json:"protocol,omitempty"`

	// httpPort is the port on the host which should be used to listen for
	// HTTP requests. This field should be set when port 80 is already in use.
	// The value should not coincide with the NodePort range of the cluster.
	// When the value is 0 or is not specified it defaults to 80.
	// +kubebuilder:validation:Optional
	// +kubebuilder:validation:Maximum=65535
	// +kubebuilder:validation:Minimum=0
	// +kubebuilder:default=80
	// +optional
	HTTPPort int32 `json:"httpPort,omitempty"`

	// httpsPort is the port on the host which should be used to listen for
	// HTTPS requests. This field should be set when port 443 is already in use.
	// The value should not coincide with the NodePort range of the cluster.
	// When the value is 0 or is not specified it defaults to 443.
	// +kubebuilder:validation:Optional
	// +kubebuilder:validation:Maximum=65535
	// +kubebuilder:validation:Minimum=0
	// +kubebuilder:default=443
	// +optional
	HTTPSPort int32 `json:"httpsPort,omitempty"`

	// statsPort is the port on the host where the stats from the router are
	// published. The value should not coincide with the NodePort range of the
	// cluster. If an external load balancer is configured to forward connections
	// to this IngressController, the load balancer should use this port for
	// health checks. The load balancer can send HTTP probes on this port on a
	// given node, with the path /healthz/ready to determine if the ingress
	// controller is ready to receive traffic on the node. For proper operation
	// the load balancer must not forward traffic to a node until the health
	// check reports ready. The load balancer should also stop forwarding requests
	// within a maximum of 45 seconds after /healthz/ready starts reporting
	// not-ready. Probing every 5 to 10 seconds, with a 5-second timeout and with
	// a threshold of two successful or failed requests to become healthy or
	// unhealthy respectively, are well-tested values. When the value is 0 or
	// is not specified it defaults to 1936.
	// +kubebuilder:validation:Optional
	// +kubebuilder:validation:Maximum=65535
	// +kubebuilder:validation:Minimum=0
	// +kubebuilder:default=1936
	// +optional
	StatsPort int32 `json:"statsPort,omitempty"`
}

type HybridOverlayConfig struct {
	// HybridClusterNetwork defines a network space given to nodes on an additional overlay network.
	HybridClusterNetwork []ClusterNetworkEntry `json:"hybridClusterNetwork"`
	// HybridOverlayVXLANPort defines the VXLAN port number to be used by the additional overlay network.
	// Default is 4789
	// +optional
	HybridOverlayVXLANPort *uint32 `json:"hybridOverlayVXLANPort,omitempty"`
}

type IBMLoadBalancerParameters struct {
	// protocol specifies whether the load balancer uses PROXY protocol to forward connections to
	// the IngressController. See "service.kubernetes.io/ibm-load-balancer-cloud-provider-enable-features:
	// "proxy-protocol"" at https://cloud.ibm.com/docs/containers?topic=containers-vpc-lbaas"
	//
	// PROXY protocol can be used with load balancers that support it to
	// communicate the source addresses of client connections when
	// forwarding those connections to the IngressController.  Using PROXY
	// protocol enables the IngressController to report those source
	// addresses instead of reporting the load balancer's address in HTTP
	// headers and logs.  Note that enabling PROXY protocol on the
	// IngressController will cause connections to fail if you are not using
	// a load balancer that uses PROXY protocol to forward connections to
	// the IngressController.  See
	// http://www.haproxy.org/download/2.2/doc/proxy-protocol.txt for
	// information about PROXY protocol.
	//
	// Valid values for protocol are TCP, PROXY and omitted.
	// When omitted, this means no opinion and the platform is left to choose a reasonable default, which is subject to change over time.
	// The current default is TCP, without the proxy protocol enabled.
	//
	// +optional
	Protocol IngressControllerProtocol `json:"protocol,omitempty"`
}

type IPAMConfig struct {
	// Type is the type of IPAM module will be used for IP Address Management(IPAM).
	// The supported values are IPAMTypeDHCP, IPAMTypeStatic
	Type IPAMType `json:"type"`

	// StaticIPAMConfig configures the static IP address in case of type:IPAMTypeStatic
	// +optional
	StaticIPAMConfig *StaticIPAMConfig `json:"staticIPAMConfig,omitempty"`
}

type IPAMType string

type IPFIXConfig struct {
	// ipfixCollectors is list of strings formatted as ip:port with a maximum of ten items
	// +kubebuilder:validation:MinItems=1
	// +kubebuilder:validation:MaxItems=10
	Collectors []IPPort `json:"collectors,omitempty"`
}

type IPForwardingMode string

type IPPort string

type IPsecConfig struct {
}

type IngressController struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ObjectMeta `json:"metadata,omitempty"`

	// spec is the specification of the desired behavior of the IngressController.
	Spec IngressControllerSpec `json:"spec,omitempty"`
	// status is the most recently observed status of the IngressController.
	Status IngressControllerStatus `json:"status,omitempty"`
}

type IngressControllerCaptureHTTPCookie struct {
	IngressControllerCaptureHTTPCookieUnion `json:",inline"`

	// maxLength specifies a maximum length of the string that will be
	// logged, which includes the cookie name, cookie value, and
	// one-character delimiter.  If the log entry exceeds this length, the
	// value will be truncated in the log message.  Note that the ingress
	// controller may impose a separate bound on the total length of HTTP
	// headers in a request.
	//
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:Minimum=1
	// +kubebuilder:validation:Maximum=1024
	// +required
	MaxLength int `json:"maxLength"`
}

type IngressControllerCaptureHTTPCookieUnion struct {
	// matchType specifies the type of match to be performed on the cookie
	// name.  Allowed values are "Exact" for an exact string match and
	// "Prefix" for a string prefix match.  If "Exact" is specified, a name
	// must be specified in the name field.  If "Prefix" is provided, a
	// prefix must be specified in the namePrefix field.  For example,
	// specifying matchType "Prefix" and namePrefix "foo" will capture a
	// cookie named "foo" or "foobar" but not one named "bar".  The first
	// matching cookie is captured.
	//
	// +unionDiscriminator
	// +kubebuilder:validation:Required
	// +required
	MatchType CookieMatchType `json:"matchType,omitempty"`

	// name specifies a cookie name.  Its value must be a valid HTTP cookie
	// name as defined in RFC 6265 section 4.1.
	//
	// +kubebuilder:validation:Pattern="^[-!#$%&'*+.0-9A-Z^_`a-z|~]*$"
	// +kubebuilder:validation:MinLength=0
	// +kubebuilder:validation:MaxLength=1024
	// +optional
	Name string `json:"name"`

	// namePrefix specifies a cookie name prefix.  Its value must be a valid
	// HTTP cookie name as defined in RFC 6265 section 4.1.
	//
	// +kubebuilder:validation:Pattern="^[-!#$%&'*+.0-9A-Z^_`a-z|~]*$"
	// +kubebuilder:validation:MinLength=0
	// +kubebuilder:validation:MaxLength=1024
	// +optional
	NamePrefix string `json:"namePrefix"`
}

type IngressControllerCaptureHTTPHeader struct {
	// name specifies a header name.  Its value must be a valid HTTP header
	// name as defined in RFC 2616 section 4.2.
	//
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:Pattern="^[-!#$%&'*+.0-9A-Z^_`a-z|~]+$"
	// +required
	Name string `json:"name"`

	// maxLength specifies a maximum length for the header value.  If a
	// header value exceeds this length, the value will be truncated in the
	// log message.  Note that the ingress controller may impose a separate
	// bound on the total length of HTTP headers in a request.
	//
	// +kubebuilder:validation:Required
	// +kubebuilder:validation:Minimum=1
	// +required
	MaxLength int `json:"maxLength"`
}

type IngressControllerCaptureHTTPHeaders struct {
	// request specifies which HTTP request headers to capture.
	//
	// If this field is empty, no request headers are captured.
	//
	// +nullable
	// +optional
	Request []IngressControllerCaptureHTTPHeader `json:"request,omitempty"`

	// response specifies which HTTP response headers to capture.
	//
	// If this field is empty, no response headers are captured.
	//
	// +nullable
	// +optional
	Response []IngressControllerCaptureHTTPHeader `json:"response,omitempty"`
}

type IngressControllerHTTPHeaderNameCaseAdjustment string

type IngressControllerHTTPHeaderPolicy string

type IngressControllerHTTPHeaders struct {
	// forwardedHeaderPolicy specifies when and how the IngressController
	// sets the Forwarded, X-Forwarded-For, X-Forwarded-Host,
	// X-Forwarded-Port, X-Forwarded-Proto, and X-Forwarded-Proto-Version
	// HTTP headers.  The value may be one of the following:
	//
	// * "Append", which specifies that the IngressController appends the
	//   headers, preserving existing headers.
	//
	// * "Replace", which specifies that the IngressController sets the
	//   headers, replacing any existing Forwarded or X-Forwarded-* headers.
	//
	// * "IfNone", which specifies that the IngressController sets the
	//   headers if they are not already set.
	//
	// * "Never", which specifies that the IngressController never sets the
	//   headers, preserving any existing headers.
	//
	// By default, the policy is "Append".
	//
	// +optional
	ForwardedHeaderPolicy IngressControllerHTTPHeaderPolicy `json:"forwardedHeaderPolicy,omitempty"`

	// uniqueId describes configuration for a custom HTTP header that the
	// ingress controller should inject into incoming HTTP requests.
	// Typically, this header is configured to have a value that is unique
	// to the HTTP request.  The header can be used by applications or
	// included in access logs to facilitate tracing individual HTTP
	// requests.
	//
	// If this field is empty, no such header is injected into requests.
	//
	// +optional
	UniqueId IngressControllerHTTPUniqueIdHeaderPolicy `json:"uniqueId,omitempty"`

	// headerNameCaseAdjustments specifies case adjustments that can be
	// applied to HTTP header names.  Each adjustment is specified as an
	// HTTP header name with the desired capitalization.  For example,
	// specifying "X-Forwarded-For" indicates that the "x-forwarded-for"
	// HTTP header should be adjusted to have the specified capitalization.
	//
	// These adjustments are only applied to cleartext, edge-terminated, and
	// re-encrypt routes, and only when using HTTP/1.
	//
	// For request headers, these adjustments are applied only for routes
	// that have the haproxy.router.openshift.io/h1-adjust-case=true
	// annotation.  For response headers, these adjustments are applied to
	// all HTTP responses.
	//
	// If this field is empty, no request headers are adjusted.
	//
	// +nullable
	// +optional
	HeaderNameCaseAdjustments []IngressControllerHTTPHeaderNameCaseAdjustment `json:"headerNameCaseAdjustments,omitempty"`
}

type IngressControllerHTTPUniqueIdHeaderPolicy struct {
	// name specifies the name of the HTTP header (for example, "unique-id")
	// that the ingress controller should inject into HTTP requests.  The
	// field's value must be a valid HTTP header name as defined in RFC 2616
	// section 4.2.  If the field is empty, no header is injected.
	//
	// +optional
	// +kubebuilder:validation:Pattern="^$|^[-!#$%&'*+.0-9A-Z^_`a-z|~]+$"
	// +kubebuilder:validation:MinLength=0
	// +kubebuilder:validation:MaxLength=1024
	Name string `json:"name,omitempty"`

	// format specifies the format for the injected HTTP header's value.
	// This field has no effect unless name is specified.  For the
	// HAProxy-based ingress controller implementation, this format uses the
	// same syntax as the HTTP log format.  If the field is empty, the
	// default value is "%{+X}o\\ %ci:%cp_%fi:%fp_%Ts_%rt:%pid"; see the
	// corresponding HAProxy documentation:
	// http://cbonte.github.io/haproxy-dconv/2.0/configuration.html#8.2.3
	//
	// +optional
	// +kubebuilder:validation:Pattern="^(%(%|(\\{[-+]?[QXE](,[-+]?[QXE])*\\})?([A-Za-z]+|\\[[.0-9A-Z_a-z]+(\\([^)]+\\))?(,[.0-9A-Z_a-z]+(\\([^)]+\\))?)*\\]))|[^%[:cntrl:]])*$"
	// +kubebuilder:validation:MinLength=0
	// +kubebuilder:validation:MaxLength=1024
	Format string `json:"format,omitempty"`
}

type IngressControllerList struct {
	metav1.TypeMeta `json:",inline"`

	// metadata is the standard list's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	metav1.ListMeta `json:"metadata,omitempty"`

	Items []IngressController `json:"items"`
}

type IngressControllerLogging struct {
	// access describes how the client requests should be logged.
	//
	// If this field is empty, access logging is disabled.
	//
	// +optional
	Access *AccessLogging `json:"access,omitempty"`
}