appstream

type DirectoryConfig struct {
	pulumi.CustomResourceState

	// Date and time, in UTC and extended RFC 3339 format, when the directory config was created.
	CreatedTime pulumi.StringOutput `pulumi:"createdTime"`
	// Fully qualified name of the directory.
	DirectoryName pulumi.StringOutput `pulumi:"directoryName"`
	// Distinguished names of the organizational units for computer accounts.
	OrganizationalUnitDistinguishedNames pulumi.StringArrayOutput `pulumi:"organizationalUnitDistinguishedNames"`
	// Region where this resource will be [managed](https://docs.aws.amazon.com/general/latest/gr/rande.html#regional-endpoints). Defaults to the Region set in the provider configuration.
	Region pulumi.StringOutput `pulumi:"region"`
	// Configuration block for the name of the directory and organizational unit (OU) to use to join the directory config to a Microsoft Active Directory domain. See `serviceAccountCredentials` below.
	ServiceAccountCredentials DirectoryConfigServiceAccountCredentialsOutput `pulumi:"serviceAccountCredentials"`
}

type DirectoryConfigArgs struct {
	// Fully qualified name of the directory.
	DirectoryName pulumi.StringInput
	// Distinguished names of the organizational units for computer accounts.
	OrganizationalUnitDistinguishedNames pulumi.StringArrayInput
	// Region where this resource will be [managed](https://docs.aws.amazon.com/general/latest/gr/rande.html#regional-endpoints). Defaults to the Region set in the provider configuration.
	Region pulumi.StringPtrInput
	// Configuration block for the name of the directory and organizational unit (OU) to use to join the directory config to a Microsoft Active Directory domain. See `serviceAccountCredentials` below.
	ServiceAccountCredentials DirectoryConfigServiceAccountCredentialsInput
}

type DirectoryConfigArray []DirectoryConfigInput

type DirectoryConfigArrayInput interface {
	pulumi.Input

	ToDirectoryConfigArrayOutput() DirectoryConfigArrayOutput
	ToDirectoryConfigArrayOutputWithContext(context.Context) DirectoryConfigArrayOutput
}

type DirectoryConfigArrayOutput struct{ *pulumi.OutputState }

type DirectoryConfigInput interface {
	pulumi.Input

	ToDirectoryConfigOutput() DirectoryConfigOutput
	ToDirectoryConfigOutputWithContext(ctx context.Context) DirectoryConfigOutput
}

type DirectoryConfigMap map[string]DirectoryConfigInput

type DirectoryConfigMapInput interface {
	pulumi.Input

	ToDirectoryConfigMapOutput() DirectoryConfigMapOutput
	ToDirectoryConfigMapOutputWithContext(context.Context) DirectoryConfigMapOutput
}

type DirectoryConfigMapOutput struct{ *pulumi.OutputState }

type DirectoryConfigOutput struct{ *pulumi.OutputState }

type DirectoryConfigServiceAccountCredentials struct {
	// User name of the account. This account must have the following privileges: create computer objects, join computers to the domain, and change/reset the password on descendant computer objects for the organizational units specified.
	AccountName string `pulumi:"accountName"`
	// Password for the account.
	AccountPassword string `pulumi:"accountPassword"`
}

type DirectoryConfigServiceAccountCredentialsArgs struct {
	// User name of the account. This account must have the following privileges: create computer objects, join computers to the domain, and change/reset the password on descendant computer objects for the organizational units specified.
	AccountName pulumi.StringInput `pulumi:"accountName"`
	// Password for the account.
	AccountPassword pulumi.StringInput `pulumi:"accountPassword"`
}

type DirectoryConfigServiceAccountCredentialsInput interface {
	pulumi.Input

	ToDirectoryConfigServiceAccountCredentialsOutput() DirectoryConfigServiceAccountCredentialsOutput
	ToDirectoryConfigServiceAccountCredentialsOutputWithContext(context.Context) DirectoryConfigServiceAccountCredentialsOutput
}

type DirectoryConfigServiceAccountCredentialsOutput struct{ *pulumi.OutputState }

type DirectoryConfigServiceAccountCredentialsPtrInput interface {
	pulumi.Input

	ToDirectoryConfigServiceAccountCredentialsPtrOutput() DirectoryConfigServiceAccountCredentialsPtrOutput
	ToDirectoryConfigServiceAccountCredentialsPtrOutputWithContext(context.Context) DirectoryConfigServiceAccountCredentialsPtrOutput
}

type DirectoryConfigServiceAccountCredentialsPtrOutput struct{ *pulumi.OutputState }

type DirectoryConfigState struct {
	// Date and time, in UTC and extended RFC 3339 format, when the directory config was created.
	CreatedTime pulumi.StringPtrInput
	// Fully qualified name of the directory.
	DirectoryName pulumi.StringPtrInput
	// Distinguished names of the organizational units for computer accounts.
	OrganizationalUnitDistinguishedNames pulumi.StringArrayInput
	// Region where this resource will be [managed](https://docs.aws.amazon.com/general/latest/gr/rande.html#regional-endpoints). Defaults to the Region set in the provider configuration.
	Region pulumi.StringPtrInput
	// Configuration block for the name of the directory and organizational unit (OU) to use to join the directory config to a Microsoft Active Directory domain. See `serviceAccountCredentials` below.
	ServiceAccountCredentials DirectoryConfigServiceAccountCredentialsPtrInput
}

type Fleet struct {
	pulumi.CustomResourceState

	// ARN of the appstream fleet.
	Arn pulumi.StringOutput `pulumi:"arn"`
	// Configuration block for the desired capacity of the fleet. See below.
	ComputeCapacity FleetComputeCapacityOutput `pulumi:"computeCapacity"`
	// Date and time, in UTC and extended RFC 3339 format, when the fleet was created.
	CreatedTime pulumi.StringOutput `pulumi:"createdTime"`
	// Description to display.
	Description pulumi.StringOutput `pulumi:"description"`
	// Amount of time that a streaming session remains active after users disconnect.
	DisconnectTimeoutInSeconds pulumi.IntOutput `pulumi:"disconnectTimeoutInSeconds"`
	// Human-readable friendly name for the AppStream fleet.
	DisplayName pulumi.StringOutput `pulumi:"displayName"`
	// Configuration block for the name of the directory and organizational unit (OU) to use to join the fleet to a Microsoft Active Directory domain. See below.
	DomainJoinInfo FleetDomainJoinInfoOutput `pulumi:"domainJoinInfo"`
	// Enables or disables default internet access for the fleet.
	EnableDefaultInternetAccess pulumi.BoolOutput `pulumi:"enableDefaultInternetAccess"`
	// Fleet type. Valid values are: `ON_DEMAND`, `ALWAYS_ON`
	FleetType pulumi.StringOutput `pulumi:"fleetType"`
	// ARN of the IAM role to apply to the fleet.
	IamRoleArn pulumi.StringOutput `pulumi:"iamRoleArn"`
	// Amount of time that users can be idle (inactive) before they are disconnected from their streaming session and the `disconnectTimeoutInSeconds` time interval begins. Defaults to `0`. Valid value is between `60` and ` 3600  `seconds.
	IdleDisconnectTimeoutInSeconds pulumi.IntPtrOutput `pulumi:"idleDisconnectTimeoutInSeconds"`
	// ARN of the public, private, or shared image to use.
	ImageArn pulumi.StringOutput `pulumi:"imageArn"`
	// Name of the image used to create the fleet.
	ImageName pulumi.StringOutput `pulumi:"imageName"`
	// Instance type to use when launching fleet instances.
	InstanceType pulumi.StringOutput `pulumi:"instanceType"`
	// The maximum number of user sessions on an instance. This only applies to multi-session fleets.
	MaxSessionsPerInstance pulumi.IntPtrOutput `pulumi:"maxSessionsPerInstance"`
	// Maximum amount of time that a streaming session can remain active, in seconds.
	MaxUserDurationInSeconds pulumi.IntOutput `pulumi:"maxUserDurationInSeconds"`
	// Unique name for the fleet.
	//
	// The following arguments are optional:
	Name pulumi.StringOutput `pulumi:"name"`
	// Region where this resource will be [managed](https://docs.aws.amazon.com/general/latest/gr/rande.html#regional-endpoints). Defaults to the Region set in the provider configuration.
	Region pulumi.StringOutput `pulumi:"region"`
	// State of the fleet. Can be `STARTING`, `RUNNING`, `STOPPING` or `STOPPED`
	State pulumi.StringOutput `pulumi:"state"`
	// AppStream 2.0 view that is displayed to your users when they stream from the fleet. When `APP` is specified, only the windows of applications opened by users display. When `DESKTOP` is specified, the standard desktop that is provided by the operating system displays. If not specified, defaults to `APP`.
	StreamView pulumi.StringOutput `pulumi:"streamView"`
	// Map of tags to attach to AppStream instances.
	Tags    pulumi.StringMapOutput `pulumi:"tags"`
	TagsAll pulumi.StringMapOutput `pulumi:"tagsAll"`
	// Configuration block for the VPC configuration for the image builder. See below.
	VpcConfig FleetVpcConfigOutput `pulumi:"vpcConfig"`
}

type FleetArgs struct {
	// Configuration block for the desired capacity of the fleet. See below.
	ComputeCapacity FleetComputeCapacityInput
	// Description to display.
	Description pulumi.StringPtrInput
	// Amount of time that a streaming session remains active after users disconnect.
	DisconnectTimeoutInSeconds pulumi.IntPtrInput
	// Human-readable friendly name for the AppStream fleet.
	DisplayName pulumi.StringPtrInput
	// Configuration block for the name of the directory and organizational unit (OU) to use to join the fleet to a Microsoft Active Directory domain. See below.
	DomainJoinInfo FleetDomainJoinInfoPtrInput
	// Enables or disables default internet access for the fleet.
	EnableDefaultInternetAccess pulumi.BoolPtrInput
	// Fleet type. Valid values are: `ON_DEMAND`, `ALWAYS_ON`
	FleetType pulumi.StringPtrInput
	// ARN of the IAM role to apply to the fleet.
	IamRoleArn pulumi.StringPtrInput
	// Amount of time that users can be idle (inactive) before they are disconnected from their streaming session and the `disconnectTimeoutInSeconds` time interval begins. Defaults to `0`. Valid value is between `60` and ` 3600  `seconds.
	IdleDisconnectTimeoutInSeconds pulumi.IntPtrInput
	// ARN of the public, private, or shared image to use.
	ImageArn pulumi.StringPtrInput
	// Name of the image used to create the fleet.
	ImageName pulumi.StringPtrInput
	// Instance type to use when launching fleet instances.
	InstanceType pulumi.StringInput
	// The maximum number of user sessions on an instance. This only applies to multi-session fleets.
	MaxSessionsPerInstance pulumi.IntPtrInput
	// Maximum amount of time that a streaming session can remain active, in seconds.
	MaxUserDurationInSeconds pulumi.IntPtrInput
	// Unique name for the fleet.
	//
	// The following arguments are optional:
	Name pulumi.StringPtrInput
	// Region where this resource will be [managed](https://docs.aws.amazon.com/general/latest/gr/rande.html#regional-endpoints). Defaults to the Region set in the provider configuration.
	Region pulumi.StringPtrInput
	// AppStream 2.0 view that is displayed to your users when they stream from the fleet. When `APP` is specified, only the windows of applications opened by users display. When `DESKTOP` is specified, the standard desktop that is provided by the operating system displays. If not specified, defaults to `APP`.
	StreamView pulumi.StringPtrInput
	// Map of tags to attach to AppStream instances.
	Tags pulumi.StringMapInput
	// Configuration block for the VPC configuration for the image builder. See below.
	VpcConfig FleetVpcConfigPtrInput
}

type FleetArray []FleetInput

type FleetArrayInput interface {
	pulumi.Input

	ToFleetArrayOutput() FleetArrayOutput
	ToFleetArrayOutputWithContext(context.Context) FleetArrayOutput
}

type FleetArrayOutput struct{ *pulumi.OutputState }

type FleetComputeCapacity struct {
	// Number of currently available instances that can be used to stream sessions.
	Available *int `pulumi:"available"`
	// Desired number of streaming instances.
	DesiredInstances *int `pulumi:"desiredInstances"`
	// Desired number of user sessions for a multi-session fleet. This is not allowed for single-session fleets.
	DesiredSessions *int `pulumi:"desiredSessions"`
	// Number of instances in use for streaming.
	InUse *int `pulumi:"inUse"`
	// Total number of simultaneous streaming instances that are running.
	Running *int `pulumi:"running"`
}

type FleetComputeCapacityArgs struct {
	// Number of currently available instances that can be used to stream sessions.
	Available pulumi.IntPtrInput `pulumi:"available"`
	// Desired number of streaming instances.
	DesiredInstances pulumi.IntPtrInput `pulumi:"desiredInstances"`
	// Desired number of user sessions for a multi-session fleet. This is not allowed for single-session fleets.
	DesiredSessions pulumi.IntPtrInput `pulumi:"desiredSessions"`
	// Number of instances in use for streaming.
	InUse pulumi.IntPtrInput `pulumi:"inUse"`
	// Total number of simultaneous streaming instances that are running.
	Running pulumi.IntPtrInput `pulumi:"running"`
}

type FleetComputeCapacityInput interface {
	pulumi.Input

	ToFleetComputeCapacityOutput() FleetComputeCapacityOutput
	ToFleetComputeCapacityOutputWithContext(context.Context) FleetComputeCapacityOutput
}

type FleetComputeCapacityOutput struct{ *pulumi.OutputState }

type FleetComputeCapacityPtrInput interface {
	pulumi.Input

	ToFleetComputeCapacityPtrOutput() FleetComputeCapacityPtrOutput
	ToFleetComputeCapacityPtrOutputWithContext(context.Context) FleetComputeCapacityPtrOutput
}

type FleetComputeCapacityPtrOutput struct{ *pulumi.OutputState }

type FleetDomainJoinInfo struct {
	// Fully qualified name of the directory (for example, corp.example.com).
	DirectoryName *string `pulumi:"directoryName"`
	// Distinguished name of the organizational unit for computer accounts.
	OrganizationalUnitDistinguishedName *string `pulumi:"organizationalUnitDistinguishedName"`
}

type FleetDomainJoinInfoArgs struct {
	// Fully qualified name of the directory (for example, corp.example.com).
	DirectoryName pulumi.StringPtrInput `pulumi:"directoryName"`
	// Distinguished name of the organizational unit for computer accounts.
	OrganizationalUnitDistinguishedName pulumi.StringPtrInput `pulumi:"organizationalUnitDistinguishedName"`
}

type FleetDomainJoinInfoInput interface {
	pulumi.Input

	ToFleetDomainJoinInfoOutput() FleetDomainJoinInfoOutput
	ToFleetDomainJoinInfoOutputWithContext(context.Context) FleetDomainJoinInfoOutput
}

type FleetDomainJoinInfoOutput struct{ *pulumi.OutputState }

type FleetDomainJoinInfoPtrInput interface {
	pulumi.Input

	ToFleetDomainJoinInfoPtrOutput() FleetDomainJoinInfoPtrOutput
	ToFleetDomainJoinInfoPtrOutputWithContext(context.Context) FleetDomainJoinInfoPtrOutput
}

type FleetDomainJoinInfoPtrOutput struct{ *pulumi.OutputState }

type FleetInput interface {
	pulumi.Input

	ToFleetOutput() FleetOutput
	ToFleetOutputWithContext(ctx context.Context) FleetOutput
}

type FleetMap map[string]FleetInput

type FleetMapInput interface {
	pulumi.Input

	ToFleetMapOutput() FleetMapOutput
	ToFleetMapOutputWithContext(context.Context) FleetMapOutput
}

type FleetMapOutput struct{ *pulumi.OutputState }

type FleetOutput struct{ *pulumi.OutputState }

type FleetStackAssociation struct {
	pulumi.CustomResourceState

	// Name of the fleet.
	FleetName pulumi.StringOutput `pulumi:"fleetName"`
	// Region where this resource will be [managed](https://docs.aws.amazon.com/general/latest/gr/rande.html#regional-endpoints). Defaults to the Region set in the provider configuration.
	Region pulumi.StringOutput `pulumi:"region"`
	// Name of the stack.
	StackName pulumi.StringOutput `pulumi:"stackName"`
}

type FleetStackAssociationArgs struct {
	// Name of the fleet.
	FleetName pulumi.StringInput
	// Region where this resource will be [managed](https://docs.aws.amazon.com/general/latest/gr/rande.html#regional-endpoints). Defaults to the Region set in the provider configuration.
	Region pulumi.StringPtrInput
	// Name of the stack.
	StackName pulumi.StringInput
}

type FleetStackAssociationArray []FleetStackAssociationInput

type FleetStackAssociationArrayInput interface {
	pulumi.Input

	ToFleetStackAssociationArrayOutput() FleetStackAssociationArrayOutput
	ToFleetStackAssociationArrayOutputWithContext(context.Context) FleetStackAssociationArrayOutput
}

type FleetStackAssociationArrayOutput struct{ *pulumi.OutputState }

type FleetStackAssociationInput interface {
	pulumi.Input

	ToFleetStackAssociationOutput() FleetStackAssociationOutput
	ToFleetStackAssociationOutputWithContext(ctx context.Context) FleetStackAssociationOutput
}

type FleetStackAssociationMap map[string]FleetStackAssociationInput

type FleetStackAssociationMapInput interface {
	pulumi.Input

	ToFleetStackAssociationMapOutput() FleetStackAssociationMapOutput
	ToFleetStackAssociationMapOutputWithContext(context.Context) FleetStackAssociationMapOutput
}

type FleetStackAssociationMapOutput struct{ *pulumi.OutputState }

type FleetStackAssociationOutput struct{ *pulumi.OutputState }

type FleetStackAssociationState struct {
	// Name of the fleet.
	FleetName pulumi.StringPtrInput
	// Region where this resource will be [managed](https://docs.aws.amazon.com/general/latest/gr/rande.html#regional-endpoints). Defaults to the Region set in the provider configuration.
	Region pulumi.StringPtrInput
	// Name of the stack.
	StackName pulumi.StringPtrInput
}

type FleetState struct {
	// ARN of the appstream fleet.
	Arn pulumi.StringPtrInput
	// Configuration block for the desired capacity of the fleet. See below.
	ComputeCapacity FleetComputeCapacityPtrInput
	// Date and time, in UTC and extended RFC 3339 format, when the fleet was created.
	CreatedTime pulumi.StringPtrInput
	// Description to display.
	Description pulumi.StringPtrInput
	// Amount of time that a streaming session remains active after users disconnect.
	DisconnectTimeoutInSeconds pulumi.IntPtrInput
	// Human-readable friendly name for the AppStream fleet.
	DisplayName pulumi.StringPtrInput
	// Configuration block for the name of the directory and organizational unit (OU) to use to join the fleet to a Microsoft Active Directory domain. See below.
	DomainJoinInfo FleetDomainJoinInfoPtrInput
	// Enables or disables default internet access for the fleet.
	EnableDefaultInternetAccess pulumi.BoolPtrInput
	// Fleet type. Valid values are: `ON_DEMAND`, `ALWAYS_ON`
	FleetType pulumi.StringPtrInput
	// ARN of the IAM role to apply to the fleet.
	IamRoleArn pulumi.StringPtrInput
	// Amount of time that users can be idle (inactive) before they are disconnected from their streaming session and the `disconnectTimeoutInSeconds` time interval begins. Defaults to `0`. Valid value is between `60` and ` 3600  `seconds.
	IdleDisconnectTimeoutInSeconds pulumi.IntPtrInput
	// ARN of the public, private, or shared image to use.
	ImageArn pulumi.StringPtrInput
	// Name of the image used to create the fleet.
	ImageName pulumi.StringPtrInput
	// Instance type to use when launching fleet instances.
	InstanceType pulumi.StringPtrInput
	// The maximum number of user sessions on an instance. This only applies to multi-session fleets.
	MaxSessionsPerInstance pulumi.IntPtrInput
	// Maximum amount of time that a streaming session can remain active, in seconds.
	MaxUserDurationInSeconds pulumi.IntPtrInput
	// Unique name for the fleet.
	//
	// The following arguments are optional:
	Name pulumi.StringPtrInput
	// Region where this resource will be [managed](https://docs.aws.amazon.com/general/latest/gr/rande.html#regional-endpoints). Defaults to the Region set in the provider configuration.
	Region pulumi.StringPtrInput
	// State of the fleet. Can be `STARTING`, `RUNNING`, `STOPPING` or `STOPPED`
	State pulumi.StringPtrInput
	// AppStream 2.0 view that is displayed to your users when they stream from the fleet. When `APP` is specified, only the windows of applications opened by users display. When `DESKTOP` is specified, the standard desktop that is provided by the operating system displays. If not specified, defaults to `APP`.
	StreamView pulumi.StringPtrInput
	// Map of tags to attach to AppStream instances.
	Tags    pulumi.StringMapInput
	TagsAll pulumi.StringMapInput
	// Configuration block for the VPC configuration for the image builder. See below.
	VpcConfig FleetVpcConfigPtrInput
}

type FleetVpcConfig struct {
	// Identifiers of the security groups for the fleet or image builder.
	SecurityGroupIds []string `pulumi:"securityGroupIds"`
	// Identifiers of the subnets to which a network interface is attached from the fleet instance or image builder instance.
	SubnetIds []string `pulumi:"subnetIds"`
}

type FleetVpcConfigArgs struct {
	// Identifiers of the security groups for the fleet or image builder.
	SecurityGroupIds pulumi.StringArrayInput `pulumi:"securityGroupIds"`
	// Identifiers of the subnets to which a network interface is attached from the fleet instance or image builder instance.
	SubnetIds pulumi.StringArrayInput `pulumi:"subnetIds"`
}

type FleetVpcConfigInput interface {
	pulumi.Input

	ToFleetVpcConfigOutput() FleetVpcConfigOutput
	ToFleetVpcConfigOutputWithContext(context.Context) FleetVpcConfigOutput
}

type FleetVpcConfigOutput struct{ *pulumi.OutputState }

type FleetVpcConfigPtrInput interface {
	pulumi.Input

	ToFleetVpcConfigPtrOutput() FleetVpcConfigPtrOutput
	ToFleetVpcConfigPtrOutputWithContext(context.Context) FleetVpcConfigPtrOutput
}

type FleetVpcConfigPtrOutput struct{ *pulumi.OutputState }

type GetImageApplication struct {
	// The app block ARN of the application.
	AppBlockArn string `pulumi:"appBlockArn"`
	// Arn of the image being searched for. Cannot be used with nameRegex or name.
	Arn string `pulumi:"arn"`
	// Time at which this image was created.
	CreatedTime string `pulumi:"createdTime"`
	// Description of image.
	Description string `pulumi:"description"`
	// Image name to display.
	DisplayName string `pulumi:"displayName"`
	// Bool based on if the application is enabled.
	Enabled bool `pulumi:"enabled"`
	// A list named iconS3Location that contains the following:
	IconS3Locations []GetImageApplicationIconS3Location `pulumi:"iconS3Locations"`
	// URL of the application icon. This URL may be time-limited.
	IconUrl string `pulumi:"iconUrl"`
	// List of the instance families of the application.
	InstanceFamilies []string `pulumi:"instanceFamilies"`
	// Arguments that are passed to the application at it's launch.
	LaunchParameters string `pulumi:"launchParameters"`
	// Path to the application's excecutable in the instance.
	LaunchPath string `pulumi:"launchPath"`
	// String to string map that contains additional attributes used to describe the application.
	// * `Name` - Name of the application.
	Metadata map[string]string `pulumi:"metadata"`
	// Name of the image being searched for. Cannot be used with nameRegex or arn.
	Name string `pulumi:"name"`
	// Array of strings describing the platforms on which the application can run.
	// Values will be from: WINDOWS | WINDOWS_SERVER_2016 | WINDOWS_SERVER_2019 | WINDOWS_SERVER_2022 | AMAZON_LINUX2
	Platforms []string `pulumi:"platforms"`
	// Working directory for the application.
	WorkingDirectory string `pulumi:"workingDirectory"`
}

type GetImageApplicationArgs struct {
	// The app block ARN of the application.
	AppBlockArn pulumi.StringInput `pulumi:"appBlockArn"`
	// Arn of the image being searched for. Cannot be used with nameRegex or name.
	Arn pulumi.StringInput `pulumi:"arn"`
	// Time at which this image was created.
	CreatedTime pulumi.StringInput `pulumi:"createdTime"`
	// Description of image.
	Description pulumi.StringInput `pulumi:"description"`
	// Image name to display.
	DisplayName pulumi.StringInput `pulumi:"displayName"`
	// Bool based on if the application is enabled.
	Enabled pulumi.BoolInput `pulumi:"enabled"`
	// A list named iconS3Location that contains the following:
	IconS3Locations GetImageApplicationIconS3LocationArrayInput `pulumi:"iconS3Locations"`
	// URL of the application icon. This URL may be time-limited.
	IconUrl pulumi.StringInput `pulumi:"iconUrl"`
	// List of the instance families of the application.
	InstanceFamilies pulumi.StringArrayInput `pulumi:"instanceFamilies"`
	// Arguments that are passed to the application at it's launch.
	LaunchParameters pulumi.StringInput `pulumi:"launchParameters"`
	// Path to the application's excecutable in the instance.
	LaunchPath pulumi.StringInput `pulumi:"launchPath"`
	// String to string map that contains additional attributes used to describe the application.
	// * `Name` - Name of the application.
	Metadata pulumi.StringMapInput `pulumi:"metadata"`
	// Name of the image being searched for. Cannot be used with nameRegex or arn.
	Name pulumi.StringInput `pulumi:"name"`
	// Array of strings describing the platforms on which the application can run.
	// Values will be from: WINDOWS | WINDOWS_SERVER_2016 | WINDOWS_SERVER_2019 | WINDOWS_SERVER_2022 | AMAZON_LINUX2
	Platforms pulumi.StringArrayInput `pulumi:"platforms"`
	// Working directory for the application.
	WorkingDirectory pulumi.StringInput `pulumi:"workingDirectory"`
}

type GetImageApplicationArray []GetImageApplicationInput

type GetImageApplicationArrayInput interface {
	pulumi.Input

	ToGetImageApplicationArrayOutput() GetImageApplicationArrayOutput
	ToGetImageApplicationArrayOutputWithContext(context.Context) GetImageApplicationArrayOutput
}

type GetImageApplicationArrayOutput struct{ *pulumi.OutputState }

type GetImageApplicationIconS3Location struct {
	// S3 bucket of the S3 object.
	S3Bucket string `pulumi:"s3Bucket"`
	// S3 key of the S3 object.
	S3Key string `pulumi:"s3Key"`
}

type GetImageApplicationIconS3LocationArgs struct {
	// S3 bucket of the S3 object.
	S3Bucket pulumi.StringInput `pulumi:"s3Bucket"`
	// S3 key of the S3 object.
	S3Key pulumi.StringInput `pulumi:"s3Key"`
}

type GetImageApplicationIconS3LocationArray []GetImageApplicationIconS3LocationInput

type GetImageApplicationIconS3LocationArrayInput interface {
	pulumi.Input

	ToGetImageApplicationIconS3LocationArrayOutput() GetImageApplicationIconS3LocationArrayOutput
	ToGetImageApplicationIconS3LocationArrayOutputWithContext(context.Context) GetImageApplicationIconS3LocationArrayOutput
}

type GetImageApplicationIconS3LocationArrayOutput struct{ *pulumi.OutputState }

type GetImageApplicationIconS3LocationInput interface {
	pulumi.Input

	ToGetImageApplicationIconS3LocationOutput() GetImageApplicationIconS3LocationOutput
	ToGetImageApplicationIconS3LocationOutputWithContext(context.Context) GetImageApplicationIconS3LocationOutput
}

type GetImageApplicationIconS3LocationOutput struct{ *pulumi.OutputState }

type GetImageApplicationInput interface {
	pulumi.Input

	ToGetImageApplicationOutput() GetImageApplicationOutput
	ToGetImageApplicationOutputWithContext(context.Context) GetImageApplicationOutput
}

type GetImageApplicationOutput struct{ *pulumi.OutputState }

type GetImageArgs struct {
	// Arn of the image being searched for. Cannot be used with nameRegex or name.
	Arn *string `pulumi:"arn"`
	// Boolean that if it is set to true and there are multiple images returned the most recent will be returned. If it is set to false and there are multiple images return the datasource will error.
	MostRecent *bool `pulumi:"mostRecent"`
	// Name of the image being searched for. Cannot be used with nameRegex or arn.
	Name *string `pulumi:"name"`
	// Regular expression name of the image being searched for. Cannot be used with arn or name.
	NameRegex *string `pulumi:"nameRegex"`
	// Region where this resource will be [managed](https://docs.aws.amazon.com/general/latest/gr/rande.html#regional-endpoints). Defaults to the Region set in the provider configuration.
	Region *string `pulumi:"region"`
	// The type of image which must be (PUBLIC, PRIVATE, or SHARED).
	Type *string `pulumi:"type"`
}

type GetImageImagePermission struct {
	// Boolean indicating if the image can be used for a fleet.
	AllowFleet bool `pulumi:"allowFleet"`
	// indicated whether the image can be used for an image builder.
	AllowImageBuilder bool `pulumi:"allowImageBuilder"`
}

type GetImageImagePermissionArgs struct {
	// Boolean indicating if the image can be used for a fleet.
	AllowFleet pulumi.BoolInput `pulumi:"allowFleet"`
	// indicated whether the image can be used for an image builder.
	AllowImageBuilder pulumi.BoolInput `pulumi:"allowImageBuilder"`
}

type GetImageImagePermissionArray []GetImageImagePermissionInput

type GetImageImagePermissionArrayInput interface {
	pulumi.Input

	ToGetImageImagePermissionArrayOutput() GetImageImagePermissionArrayOutput
	ToGetImageImagePermissionArrayOutputWithContext(context.Context) GetImageImagePermissionArrayOutput
}

type GetImageImagePermissionArrayOutput struct{ *pulumi.OutputState }

type GetImageImagePermissionInput interface {
	pulumi.Input

	ToGetImageImagePermissionOutput() GetImageImagePermissionOutput
	ToGetImageImagePermissionOutputWithContext(context.Context) GetImageImagePermissionOutput
}

type GetImageImagePermissionOutput struct{ *pulumi.OutputState }

type GetImageOutputArgs struct {
	// Arn of the image being searched for. Cannot be used with nameRegex or name.
	Arn pulumi.StringPtrInput `pulumi:"arn"`
	// Boolean that if it is set to true and there are multiple images returned the most recent will be returned. If it is set to false and there are multiple images return the datasource will error.
	MostRecent pulumi.BoolPtrInput `pulumi:"mostRecent"`
	// Name of the image being searched for. Cannot be used with nameRegex or arn.
	Name pulumi.StringPtrInput `pulumi:"name"`
	// Regular expression name of the image being searched for. Cannot be used with arn or name.
	NameRegex pulumi.StringPtrInput `pulumi:"nameRegex"`
	// Region where this resource will be [managed](https://docs.aws.amazon.com/general/latest/gr/rande.html#regional-endpoints). Defaults to the Region set in the provider configuration.
	Region pulumi.StringPtrInput `pulumi:"region"`
	// The type of image which must be (PUBLIC, PRIVATE, or SHARED).
	Type pulumi.StringPtrInput `pulumi:"type"`
}

type GetImageResult struct {
	Applications []GetImageApplication `pulumi:"applications"`
	// Version of the AppStream 2.0 agent to use for instances that are launched from this image. Has a maximum length of 100 characters.
	AppstreamAgentVersion string `pulumi:"appstreamAgentVersion"`
	// ARN of the image.
	Arn string `pulumi:"arn"`
	// ARN of the image from which the image was created.
	BaseImageArn string `pulumi:"baseImageArn"`
	// Time at which this image was created.
	CreatedTime string `pulumi:"createdTime"`
	// Description of image.
	Description string `pulumi:"description"`
	// Image name to display.
	DisplayName string `pulumi:"displayName"`
	// The provider-assigned unique ID for this managed resource.
	Id string `pulumi:"id"`
	// The name of the image builder that was used to created the private image. If the image is sharedthen the value is null.
	ImageBuilderName string `pulumi:"imageBuilderName"`
	// Boolean to indicate whether an image builder can be launched from this image.
	// * `image error` - Resource error object that describes the error containing the following:
	ImageBuilderSupported bool `pulumi:"imageBuilderSupported"`
	// List of strings describing the image permissions containing the following:
	ImagePermissions []GetImageImagePermission `pulumi:"imagePermissions"`
	MostRecent       *bool                     `pulumi:"mostRecent"`
	Name             string                    `pulumi:"name"`
	NameRegex        *string                   `pulumi:"nameRegex"`
	// Operating system platform of the image. Values will be from: WINDOWS | WINDOWS_SERVER_2016 | WINDOWS_SERVER_2019 | WINDOWS_SERVER_2022 | AMAZON_LINUX2
	Platform                    string `pulumi:"platform"`
	PublicBaseImageReleasedDate string `pulumi:"publicBaseImageReleasedDate"`
	Region                      string `pulumi:"region"`
	// Current state of image. Image starts in PENDING state which changes to AVAILABLE if creation passes and FAILED if it fails. Values will be from: PENDING | AVAILABLE | FAILED | COPYING | DELETING | CREATING | IMPORTING.
	State              string                      `pulumi:"state"`
	StateChangeReasons []GetImageStateChangeReason `pulumi:"stateChangeReasons"`
	Type               *string                     `pulumi:"type"`
}

type GetImageResultOutput struct{ *pulumi.OutputState }

type GetImageStateChangeReason struct {
	Code    string `pulumi:"code"`
	Message string `pulumi:"message"`
}

type GetImageStateChangeReasonArgs struct {
	Code    pulumi.StringInput `pulumi:"code"`
	Message pulumi.StringInput `pulumi:"message"`
}

type GetImageStateChangeReasonArray []GetImageStateChangeReasonInput

type GetImageStateChangeReasonArrayInput interface {
	pulumi.Input

	ToGetImageStateChangeReasonArrayOutput() GetImageStateChangeReasonArrayOutput
	ToGetImageStateChangeReasonArrayOutputWithContext(context.Context) GetImageStateChangeReasonArrayOutput
}

type GetImageStateChangeReasonArrayOutput struct{ *pulumi.OutputState }

type GetImageStateChangeReasonInput interface {
	pulumi.Input

	ToGetImageStateChangeReasonOutput() GetImageStateChangeReasonOutput
	ToGetImageStateChangeReasonOutputWithContext(context.Context) GetImageStateChangeReasonOutput
}

type GetImageStateChangeReasonOutput struct{ *pulumi.OutputState }

type ImageBuilder struct {
	pulumi.CustomResourceState

	// Set of interface VPC endpoint (interface endpoint) objects. Maximum of 4. See below.
	AccessEndpoints ImageBuilderAccessEndpointArrayOutput `pulumi:"accessEndpoints"`
	// Version of the AppStream 2.0 agent to use for this image builder.
	AppstreamAgentVersion pulumi.StringOutput `pulumi:"appstreamAgentVersion"`
	// ARN of the appstream image builder.
	Arn pulumi.StringOutput `pulumi:"arn"`
	// Date and time, in UTC and extended RFC 3339 format, when the image builder was created.
	CreatedTime pulumi.StringOutput `pulumi:"createdTime"`
	// Description to display.
	Description pulumi.StringOutput `pulumi:"description"`
	// Human-readable friendly name for the AppStream image builder.
	DisplayName pulumi.StringOutput `pulumi:"displayName"`
	// Configuration block for the name of the directory and organizational unit (OU) to use to join the image builder to a Microsoft Active Directory domain. See below.
	DomainJoinInfo ImageBuilderDomainJoinInfoOutput `pulumi:"domainJoinInfo"`
	// Enables or disables default internet access for the image builder.
	EnableDefaultInternetAccess pulumi.BoolOutput `pulumi:"enableDefaultInternetAccess"`
	// ARN of the IAM role to apply to the image builder.
	IamRoleArn pulumi.StringOutput `pulumi:"iamRoleArn"`
	// ARN of the public, private, or shared image to use.
	ImageArn pulumi.StringOutput `pulumi:"imageArn"`
	// Name of the image used to create the image builder.
	ImageName pulumi.StringOutput `pulumi:"imageName"`
	// Instance type to use when launching the image builder.
	InstanceType pulumi.StringOutput `pulumi:"instanceType"`
	// Unique name for the image builder.
	//
	// The following arguments are optional:
	Name pulumi.StringOutput `pulumi:"name"`
	// Region where this resource will be [managed](https://docs.aws.amazon.com/general/latest/gr/rande.html#regional-endpoints). Defaults to the Region set in the provider configuration.
	Region pulumi.StringOutput `pulumi:"region"`
	// State of the image builder. For valid values, refer to the [AWS documentation](https://docs.aws.amazon.com/appstream2/latest/APIReference/API_ImageBuilder.html#AppStream2-Type-ImageBuilder-State).
	State pulumi.StringOutput `pulumi:"state"`
	// Map of tags to assign to the instance. If configured with a provider `defaultTags` configuration block present, tags with matching keys will overwrite those defined at the provider-level.
	Tags pulumi.StringMapOutput `pulumi:"tags"`
	// Map of tags assigned to the resource, including those inherited from the provider `defaultTags` configuration block.
	TagsAll pulumi.StringMapOutput `pulumi:"tagsAll"`
	// Configuration block for the VPC configuration for the image builder. See below.
	VpcConfig ImageBuilderVpcConfigOutput `pulumi:"vpcConfig"`
}

type ImageBuilderAccessEndpoint struct {
	// Type of interface endpoint. For valid values, refer to the [AWS documentation](https://docs.aws.amazon.com/appstream2/latest/APIReference/API_AccessEndpoint.html).
	EndpointType string `pulumi:"endpointType"`
	// Identifier (ID) of the interface VPC endpoint.
	VpceId *string `pulumi:"vpceId"`
}

type ImageBuilderAccessEndpointArgs struct {
	// Type of interface endpoint. For valid values, refer to the [AWS documentation](https://docs.aws.amazon.com/appstream2/latest/APIReference/API_AccessEndpoint.html).
	EndpointType pulumi.StringInput `pulumi:"endpointType"`
	// Identifier (ID) of the interface VPC endpoint.
	VpceId pulumi.StringPtrInput `pulumi:"vpceId"`
}

type ImageBuilderAccessEndpointArray []ImageBuilderAccessEndpointInput

type ImageBuilderAccessEndpointArrayInput interface {
	pulumi.Input

	ToImageBuilderAccessEndpointArrayOutput() ImageBuilderAccessEndpointArrayOutput
	ToImageBuilderAccessEndpointArrayOutputWithContext(context.Context) ImageBuilderAccessEndpointArrayOutput
}

type ImageBuilderAccessEndpointArrayOutput struct{ *pulumi.OutputState }

type ImageBuilderAccessEndpointInput interface {
	pulumi.Input

	ToImageBuilderAccessEndpointOutput() ImageBuilderAccessEndpointOutput
	ToImageBuilderAccessEndpointOutputWithContext(context.Context) ImageBuilderAccessEndpointOutput
}

type ImageBuilderAccessEndpointOutput struct{ *pulumi.OutputState }

type ImageBuilderArgs struct {
	// Set of interface VPC endpoint (interface endpoint) objects. Maximum of 4. See below.
	AccessEndpoints ImageBuilderAccessEndpointArrayInput
	// Version of the AppStream 2.0 agent to use for this image builder.
	AppstreamAgentVersion pulumi.StringPtrInput
	// Description to display.
	Description pulumi.StringPtrInput
	// Human-readable friendly name for the AppStream image builder.
	DisplayName pulumi.StringPtrInput
	// Configuration block for the name of the directory and organizational unit (OU) to use to join the image builder to a Microsoft Active Directory domain. See below.
	DomainJoinInfo ImageBuilderDomainJoinInfoPtrInput
	// Enables or disables default internet access for the image builder.
	EnableDefaultInternetAccess pulumi.BoolPtrInput
	// ARN of the IAM role to apply to the image builder.
	IamRoleArn pulumi.StringPtrInput
	// ARN of the public, private, or shared image to use.
	ImageArn pulumi.StringPtrInput
	// Name of the image used to create the image builder.
	ImageName pulumi.StringPtrInput
	// Instance type to use when launching the image builder.
	InstanceType pulumi.StringInput
	// Unique name for the image builder.
	//
	// The following arguments are optional:
	Name pulumi.StringPtrInput
	// Region where this resource will be [managed](https://docs.aws.amazon.com/general/latest/gr/rande.html#regional-endpoints). Defaults to the Region set in the provider configuration.
	Region pulumi.StringPtrInput
	// Map of tags to assign to the instance. If configured with a provider `defaultTags` configuration block present, tags with matching keys will overwrite those defined at the provider-level.
	Tags pulumi.StringMapInput
	// Configuration block for the VPC configuration for the image builder. See below.
	VpcConfig ImageBuilderVpcConfigPtrInput
}

type ImageBuilderArray []ImageBuilderInput

type ImageBuilderArrayInput interface {
	pulumi.Input

	ToImageBuilderArrayOutput() ImageBuilderArrayOutput
	ToImageBuilderArrayOutputWithContext(context.Context) ImageBuilderArrayOutput
}

type ImageBuilderArrayOutput struct{ *pulumi.OutputState }

type ImageBuilderDomainJoinInfo struct {
	// Fully qualified name of the directory (for example, corp.example.com).
	DirectoryName *string `pulumi:"directoryName"`
	// Distinguished name of the organizational unit for computer accounts.
	OrganizationalUnitDistinguishedName *string `pulumi:"organizationalUnitDistinguishedName"`
}

type ImageBuilderDomainJoinInfoArgs struct {
	// Fully qualified name of the directory (for example, corp.example.com).
	DirectoryName pulumi.StringPtrInput `pulumi:"directoryName"`
	// Distinguished name of the organizational unit for computer accounts.
	OrganizationalUnitDistinguishedName pulumi.StringPtrInput `pulumi:"organizationalUnitDistinguishedName"`
}

type ImageBuilderDomainJoinInfoInput interface {
	pulumi.Input

	ToImageBuilderDomainJoinInfoOutput() ImageBuilderDomainJoinInfoOutput
	ToImageBuilderDomainJoinInfoOutputWithContext(context.Context) ImageBuilderDomainJoinInfoOutput
}

type ImageBuilderDomainJoinInfoOutput struct{ *pulumi.OutputState }

type ImageBuilderDomainJoinInfoPtrInput interface {
	pulumi.Input

	ToImageBuilderDomainJoinInfoPtrOutput() ImageBuilderDomainJoinInfoPtrOutput
	ToImageBuilderDomainJoinInfoPtrOutputWithContext(context.Context) ImageBuilderDomainJoinInfoPtrOutput
}

type ImageBuilderDomainJoinInfoPtrOutput struct{ *pulumi.OutputState }

type ImageBuilderInput interface {
	pulumi.Input

	ToImageBuilderOutput() ImageBuilderOutput
	ToImageBuilderOutputWithContext(ctx context.Context) ImageBuilderOutput
}

type ImageBuilderMap map[string]ImageBuilderInput

type ImageBuilderMapInput interface {
	pulumi.Input

	ToImageBuilderMapOutput() ImageBuilderMapOutput
	ToImageBuilderMapOutputWithContext(context.Context) ImageBuilderMapOutput
}

type ImageBuilderMapOutput struct{ *pulumi.OutputState }

type ImageBuilderOutput struct{ *pulumi.OutputState }