cmd

var CommonFlags []cli.Flag = []cli.Flag{
	&cli.StringFlag{
		Name:    "config",
		Usage:   "指定 edgevpn 配置文件路径",
		EnvVars: []string{"EDGEVPNCONFIG"},
	},
	&cli.StringSliceFlag{
		Name:    "listen-maddrs",
		Usage:   "覆盖默认的 0.0.0.0 监听多地址",
		EnvVars: []string{"EDGEVPNLISTENMADDRS"},
	},
	&cli.StringSliceFlag{
		Name:    "dht-announce-maddrs",
		Usage:   "在 DHT 公告时覆盖监听多地址",
		EnvVars: []string{"EDGEVPNDHTANNOUNCEMADDRS"},
	},
	&cli.StringFlag{
		Name:    "timeout",
		Usage:   "指定连接流的默认超时时间",
		EnvVars: []string{"EDGEVPNTIMEOUT"},
		Value:   "15s",
	},
	&cli.IntFlag{
		Name:    "mtu",
		Usage:   "指定 MTU（最大传输单元）",
		EnvVars: []string{"EDGEVPNMTU"},
		Value:   1200,
	},
	&cli.BoolFlag{
		Name:    "bootstrap-iface",
		Usage:   "启动时设置接口（需要权限）",
		EnvVars: []string{"EDGEVPNBOOTSTRAPIFACE"},
		Value:   true,
	},
	&cli.IntFlag{
		Name:    "packet-mtu",
		Usage:   "指定数据包 MTU",
		EnvVars: []string{"EDGEVPNPACKETMTU"},
		Value:   1420,
	},
	&cli.IntFlag{
		Name:    "channel-buffer-size",
		Usage:   "指定通道缓冲区大小",
		EnvVars: []string{"EDGEVPNCHANNELBUFFERSIZE"},
		Value:   0,
	},
	&cli.IntFlag{
		Name:    "discovery-interval",
		Usage:   "DHT 发现间隔时间",
		EnvVars: []string{"EDGEVPNDHTINTERVAL"},
		Value:   720,
	},
	&cli.IntFlag{
		Name:    "ledger-announce-interval",
		Usage:   "账本公告间隔时间",
		EnvVars: []string{"EDGEVPNLEDGERINTERVAL"},
		Value:   10,
	},
	&cli.StringFlag{
		Name:    "autorelay-discovery-interval",
		Usage:   "自动中继发现间隔",
		EnvVars: []string{"EDGEVPNAUTORELAYDISCOVERYINTERVAL"},
		Value:   "5m",
	},
	&cli.BoolFlag{
		Name:    "autorelay-static-only",
		Usage:   "仅使用定义的静态中继",
		EnvVars: []string{"EDGEVPNAUTORELAYSTATICONLY"},
	},
	&cli.IntFlag{
		Name:    "ledger-synchronization-interval",
		Usage:   "账本同步间隔时间",
		EnvVars: []string{"EDGEVPNLEDGERSYNCINTERVAL"},
		Value:   10,
	},
	&cli.IntFlag{
		Name:    "nat-ratelimit-global",
		Usage:   "全局请求速率限制",
		EnvVars: []string{"EDGEVPNNATRATELIMITGLOBAL"},
		Value:   10,
	},
	&cli.IntFlag{
		Name:    "nat-ratelimit-peer",
		Usage:   "对等节点请求速率限制",
		EnvVars: []string{"EDGEVPNNATRATELIMITPEER"},
		Value:   10,
	},
	&cli.IntFlag{
		Name:    "nat-ratelimit-interval",
		Usage:   "速率限制间隔",
		EnvVars: []string{"EDGEVPNNATRATELIMITINTERVAL"},
		Value:   60,
	},
	&cli.BoolFlag{
		Name:    "nat-ratelimit",
		Usage:   "更改帮助其他对等节点确定其可达性状态的默认速率限制配置",
		EnvVars: []string{"EDGEVPNNATRATELIMIT"},
		Value:   true,
	},
	&cli.IntFlag{
		Name:    "max-connections",
		Usage:   "最大连接数",
		EnvVars: []string{"EDGEVPNMAXCONNS"},
		Value:   0,
	},
	&cli.StringFlag{
		Name:    "ledger-state",
		Usage:   "指定账本状态目录",
		EnvVars: []string{"EDGEVPNLEDGERSTATE"},
	},
	&cli.BoolFlag{
		Name:    "mdns",
		Usage:   "启用 mDNS 进行对等节点发现",
		EnvVars: []string{"EDGEVPNMDNS"},
		Value:   true,
	},
	&cli.BoolFlag{
		Name:    "autorelay",
		Usage:   "如果节点可以接受入站连接，则自动充当中继",
		EnvVars: []string{"EDGEVPNAUTORELAY"},
		Value:   true,
	},
	&cli.IntFlag{
		Name:  "concurrency",
		Usage: "要服务的并发请求数",
		Value: runtime.NumCPU(),
	},
	&cli.BoolFlag{
		Name:    "holepunch",
		Usage:   "在可能时自动尝试打洞",
		EnvVars: []string{"EDGEVPNHOLEPUNCH"},
		Value:   true,
	},
	&cli.BoolFlag{
		Name:    "natservice",
		Usage:   "尝试确定节点的可达性状态",
		EnvVars: []string{"EDGEVPNNATSERVICE"},
		Value:   true,
	},
	&cli.BoolFlag{
		Name:    "natmap",
		Usage:   "尝试通过 UPnP 在防火墙中打开端口",
		EnvVars: []string{"EDGEVPNNATMAP"},
		Value:   true,
	},
	&cli.BoolFlag{
		Name:    "dht",
		Usage:   "启用 DHT 进行对等节点发现",
		EnvVars: []string{"EDGEVPNDHT"},
		Value:   true,
	},
	&cli.BoolFlag{
		Name:    "low-profile",
		Usage:   "启用低配置模式。降低连接使用量",
		EnvVars: []string{"EDGEVPNLOWPROFILE"},
		Value:   true,
	},
	&cli.IntFlag{
		Name:    "aliveness-healthcheck-interval",
		Usage:   "健康检查间隔",
		EnvVars: []string{"HEALTHCHECKINTERVAL"},
		Value:   120,
	},
	&cli.IntFlag{
		Name:    "aliveness-healthcheck-scrub-interval",
		Usage:   "健康检查清理间隔",
		EnvVars: []string{"HEALTHCHECKSCRUBINTERVAL"},
		Value:   600,
	},
	&cli.IntFlag{
		Name:    "aliveness-healthcheck-max-interval",
		Usage:   "健康检查最大间隔。判定节点离线的阈值",
		EnvVars: []string{"HEALTHCHECKMAXINTERVAL"},
		Value:   900,
	},
	&cli.StringFlag{
		Name:    "log-level",
		Usage:   "指定日志级别",
		EnvVars: []string{"EDGEVPNLOGLEVEL"},
		Value:   "info",
	},
	&cli.StringFlag{
		Name:    "libp2p-log-level",
		Usage:   "指定 libp2p 日志级别",
		EnvVars: []string{"EDGEVPNLIBP2PLOGLEVEL"},
		Value:   "fatal",
	},
	&cli.StringSliceFlag{
		Name:    "discovery-bootstrap-peers",
		Usage:   "要使用的发现对等节点列表",
		EnvVars: []string{"EDGEVPNBOOTSTRAPPEERS"},
	},
	&cli.IntFlag{
		Name:    "connection-high-water",
		Usage:   "允许的最大连接数",
		EnvVars: []string{"EDGEVPN_CONNECTION_HIGH_WATER"},
		Value:   0,
	},
	&cli.IntFlag{
		Name:    "connection-low-water",
		Usage:   "允许的最小连接数",
		EnvVars: []string{"EDGEVPN_CONNECTION_LOW_WATER"},
		Value:   0,
	},
	&cli.StringSliceFlag{
		Name:    "autorelay-static-peer",
		Usage:   "要使用的自动中继静态对等节点列表",
		EnvVars: []string{"EDGEVPNAUTORELAYPEERS"},
	},
	&cli.StringSliceFlag{
		Name:    "blacklist",
		Usage:   "要限制的对等节点/CIDR 列表",
		EnvVars: []string{"EDGEVPNBLACKLIST"},
	},
	&cli.StringFlag{
		Name:    "token",
		Usage:   "指定 edgevpn 令牌以代替配置文件",
		EnvVars: []string{"EDGEVPNTOKEN"},
	},
	&cli.BoolFlag{
		Name:    "limit-enable",
		Usage:   "启用资源管理",
		EnvVars: []string{"LIMITENABLE"},
	},
	&cli.StringFlag{
		Name:    "limit-file",
		Usage:   "指定资源限制配置文件（JSON）",
		EnvVars: []string{"LIMITFILE"},
	},
	&cli.StringFlag{
		Name:    "limit-scope",
		Usage:   "指定限制范围",
		EnvVars: []string{"LIMITSCOPE"},
		Value:   "system",
	},
	&cli.IntFlag{
		Name:    "limit-config-streams",
		Usage:   "流资源限制配置",
		EnvVars: []string{"LIMITCONFIGSTREAMS"},
		Value:   200,
	},
	&cli.IntFlag{
		Name:    "limit-config-streams-inbound",
		Usage:   "入站流资源限制配置",
		EnvVars: []string{"LIMITCONFIGSTREAMSINBOUND"},
		Value:   30,
	},
	&cli.IntFlag{
		Name:    "limit-config-streams-outbound",
		Usage:   "出站流资源限制配置",
		EnvVars: []string{"LIMITCONFIGSTREAMSOUTBOUND"},
		Value:   30,
	},
	&cli.IntFlag{
		Name:    "limit-config-conn",
		Usage:   "连接资源限制配置",
		EnvVars: []string{"LIMITCONFIGCONNS"},
		Value:   200,
	},
	&cli.IntFlag{
		Name:    "limit-config-conn-inbound",
		Usage:   "入站连接资源限制配置",
		EnvVars: []string{"LIMITCONFIGCONNSINBOUND"},
		Value:   30,
	},
	&cli.IntFlag{
		Name:    "limit-config-conn-outbound",
		Usage:   "出站连接资源限制配置",
		EnvVars: []string{"LIMITCONFIGCONNSOUTBOUND"},
		Value:   30,
	},
	&cli.IntFlag{
		Name:    "limit-config-fd",
		Usage:   "最大文件描述符资源限制配置",
		EnvVars: []string{"LIMITCONFIGFD"},
		Value:   30,
	},
	&cli.BoolFlag{
		Name:    "peerguard",
		Usage:   "启用对等节点保护。（实验性）",
		EnvVars: []string{"PEERGUARD"},
	},
	&cli.BoolFlag{
		Name:    "privkey-cache",
		Usage:   "启用私钥缓存。（实验性）",
		EnvVars: []string{"EDGEVPNPRIVKEYCACHE"},
	},
	&cli.StringFlag{
		Name:    "privkey-cache-dir",
		Usage:   "指定用于存储生成的私钥的目录",
		EnvVars: []string{"EDGEVPNPRIVKEYCACHEDIR"},
		Value:   stateDir(),
	},
	&cli.StringSliceFlag{
		Name:    "static-peertable",
		Usage:   "要使用的静态对等节点列表（格式为 `ip:peerid`）",
		EnvVars: []string{"EDGEVPNSTATICPEERTABLE"},
	},
	&cli.StringSliceFlag{
		Name:    "whitelist",
		Usage:   "白名单中的对等节点列表",
		EnvVars: []string{"EDGEVPNWHITELIST"},
	},
	&cli.BoolFlag{
		Name:    "peergate",
		Usage:   "启用对等节点门控。（实验性）",
		EnvVars: []string{"PEERGATE"},
	},
	&cli.BoolFlag{
		Name:    "peergate-autoclean",
		Usage:   "启用对等节点门控自动清理。（实验性）",
		EnvVars: []string{"PEERGATE_AUTOCLEAN"},
	},
	&cli.BoolFlag{
		Name:    "peergate-relaxed",
		Usage:   "启用对等节点门控宽松模式。（实验性）",
		EnvVars: []string{"PEERGATE_RELAXED"},
	},
	&cli.StringFlag{
		Name:    "peergate-auth",
		Usage:   "对等节点门控认证",
		EnvVars: []string{"PEERGATE_AUTH"},
		Value:   "",
	},
	&cli.IntFlag{
		Name:    "peergate-interval",
		Usage:   "对等节点门控间隔时间",
		EnvVars: []string{"EDGEVPNPEERGATEINTERVAL"},
		Value:   120,
	},
}