README
¶
ndntdump NDN Traffic Dumper
ndntdump is a Go program that captures Named Data Networking network traffic. It can perform online processing including address anonymization for privacy protection and NDN packet name extraction.
This software is developed at the Communications Technology Laboratory of the National Institute of Standards and Technology. It is no longer in development but may see occasional maintenance updates.
Installation
This program is written in Go. You can compile and install this program with:
go install github.com/usnistgov/ndntdump/cmd/ndntdump@latest
This program is also available as a Docker container:
docker build -t localhost/ndntdump 'github.com/usnistgov/ndntdump#main'
Capture Modes
ndntdump can either live-capture from a network interface via AF_PACKET socket, or read from a tcpdump trace file. In both cases, it only recognizes Ethernet link mode.
To live-capture, set the network interface name in --ifname flag.
If the NDN forwarder is running in a Docker container, you must run ndntdump in the same network namespace as the forwarder, and specify the network interface name inside that network namespace.
It's possible to capture from all network interfaces with --ifname '*' flag; however, the network interface information isn't carried over to the output files.
To stop a live capture session, send SIGINT to the ndntdump process.
To read from a tcpdump trace file, set the filename in --input flag and set the local MAC address in --local flag.
This mode can recognize .pcap .pcap.gz .pcap.zst .pcapng .pcapng.gz .pcapng.zst file formats.
The local MAC address is necessary for determining traffic direction.
TCP flows with either source or destination port matching --wss-port flag (defaults to 9696) are analyzed for NDN over WebSocket traffic.
In live-capture mode, if the NDN forwarder and the HTTP server that performs TLS termination are communicating over lo interface, you must capture from this network interface by either running an additional ndntdump instance or using the --ifname '*' flag.
TCP flows with either source or destination port matching --tcp-port flag (defaults to 6363) are considered as NDN over TCP traffic.
These packets are anonymized and included in the output packets file.
However, this program cannot analyze NDN over TCP traffic, so that packet names and other properties do not appear in the output records file.
Output Files
ndntdump emits two output files.
The packets file is a pcapng file.
It contains Ethernet packets that carry NDN traffic.
Address anonymization has been performed on these packets.
When feasible, NDN packet payload, including Interest ApplicationParameters and Data Content, is zeroized, so that the output can be compressed effectively.
Payload blanking may be disabled with --keep-payload flag.
The records file is a Newline delimited JSON (NDJSON) file. Each line in this file is a JSON object that describes a NDN packet, either layer 2 or layer 3. See record.go for the definition of property keys. All information in the records file should be available by re-parsing the packets file.
Set output filenames in --pcapng and --json flags.
If the filename ends with .gz or .zst, the output file is compressed.
To rotate output files, send SIGHUP to the ndntdump process.
Upon receiving this signal, ndntdump closes and reopens each output file.
This may be used with logrotate's postrotate option.
Address Anonymization
To ensure privacy compliance, ndntdump anonymizes IP and MAC addresses before output files are written. IPv4 address keeps its leading 24 bits; IPv6 address keeps its leading 48 bits; MAC address keeps its leading 24 bits. Lower bits are XOR'ed with a random value, which is consistent in each run, so that the same original address yields the same anonymized address. Notice that this is a very simple and limited anonymization procedure, and we will incorporate better anonymization techniques in the future.
For WebSocket traffic, HTTP request header X-Forwarded-For may contain full client address.
This address is anonymized by changing the lower bits to zeros.
All IP addresses are anonymized by default.
Set IP subnets that should not be anonymized in --keep-ip flag (repeatable).
This may be set to subnets used by the network routers, to make it easier to identify router-to-router traffic.
A side effect is that it would expose non-router IP addresses within the same subnets.
MAC address anonymization is enabled by default.
It can be disabled with --keep-mac flag.
Documentation
¶
Overview ¶
Package ndntdump processes captured NDN traffic.
Index ¶
Constants ¶
const AnonymizerSecretLen = 14
AnonymizerSecretLen is the length of secret key inside Anonymizer.
Variables ¶
This section is empty.
Functions ¶
Types ¶
type Anonymizer ¶
type Anonymizer struct {
// contains filtered or unexported fields
}
Anonymizer anonymizes IP addresses and MAC addresses. IPv4 address keeps its leading 24 bits; IPv6 address keeps its leading 48 bits; MAC address keeps its leading 24 bits. Lower bits are XOR'ed with a random value.
func NewAnonymizer ¶
func NewAnonymizer(keepIPs *netipx.IPSet, keepMAC bool, secret *[AnonymizerSecretLen]byte) (anon *Anonymizer)
NewAnonymizer creates Anonymizer.
func (*Anonymizer) AnonymizeIP ¶
func (anon *Anonymizer) AnonymizeIP(ip net.IP)
AnonymizeIP anonymizes an IP address.
func (*Anonymizer) AnonymizeMAC ¶
func (anon *Anonymizer) AnonymizeMAC(mac net.HardwareAddr)
AnonymizeMAC anonymizes a MAC address.
type Reader ¶
type Reader struct {
// contains filtered or unexported fields
}
Reader reads NDN packets from ZeroCopyPacketDataSource.
func NewReader ¶
func NewReader(src gopacket.ZeroCopyPacketDataSource, opts ReaderOptions) (r *Reader)
NewReader creates Reader.
type ReaderOptions ¶
type ReaderOptions struct {
IsLocal func(net.HardwareAddr) bool
TCPPort int
WebSocketPort int
Anonymizer *Anonymizer
KeepPayload bool
}
ReaderOptions passes options to NewReader.
type Record ¶
type Record struct {
Wire []byte `json:"-"`
CaptureInfo gopacket.CaptureInfo `json:"-"`
DirType string `json:"t"` // packet direction and type
Timestamp int64 `json:"ts"` // Unix epoch nanoseconds
Flow []byte `json:"flow"` // flow key
Size2 int `json:"size2"` // packet size at NDNLPv2 layer
Size3 int `json:"size3,omitempty"` // packet size at L3
NackReason int `json:"nackReason,omitempty"` // Nack reason
Name ndn.Name `json:"name,omitempty"` // packet name
CanBePrefix bool `json:"cbp,omitempty"` // Interest CanBePrefix
MustBeFresh bool `json:"mbf,omitempty"` // Interest MustBeFresh
FwHint []ndn.Name `json:"fwHint,omitempty"` // Interest ForwardingHint
Lifetime int `json:"lifetime,omitempty"` // Interest InterestLifetime (ms)
HopLimit int `json:"hopLimit,omitempty"` // Interest HopLimit
ContentType int `json:"contentType,omitempty"` // Data ContentType
Freshness int `json:"freshness,omitempty"` // Data FreshnessPeriod (ms)
FinalBlock bool `json:"finalBlock,omitempty"` // Data is final block
}
Record describes a parsed NDN packet.
Source Files
Directories
¶
| Path | Synopsis |
|---|---|
|
cmd
|
|
|
ndntdump
command
Command ndntdump captures NDN traffic from a network interface.
|
Command ndntdump captures NDN traffic from a network interface. |
|
Package fileoutput saves captured NDN trafic to files.
|
Package fileoutput saves captured NDN trafic to files. |
|
Package pcapinput opens GoPacket input handle.
|
Package pcapinput opens GoPacket input handle. |
|
Package websocket parses WebSocket frames out of TCP payload.
|
Package websocket parses WebSocket frames out of TCP payload. |