server

type APIConfig struct {
	// Enabled selects whether the api is enabled
	Enabled bool `hcl:"enabled,optional" toml:"enabled,optional"`

	// Port is the port number for this api
	Port uint64 `hcl:"port,optional" toml:"port,optional"`

	// Prefix is the http prefix to expose this api
	Prefix string `hcl:"prefix,optional" toml:"prefix,optional"`

	// Host is the address to bind the api
	Host string `hcl:"host,optional" toml:"host,optional"`

	// API is the list of enabled api modules
	API []string `hcl:"api,optional" toml:"api,optional"`

	// VHost is the list of valid virtual hosts
	VHost []string `hcl:"vhosts,optional" toml:"vhosts,optional"`

	// Cors is the list of Cors endpoints
	Cors []string `hcl:"corsdomain,optional" toml:"corsdomain,optional"`

	// Origins is the list of endpoints to accept requests from (only consumed for websockets)
	Origins []string `hcl:"origins,optional" toml:"origins,optional"`

	// ExecutionPoolSize is max size of workers to be used for rpc execution
	ExecutionPoolSize uint64 `hcl:"ep-size,optional" toml:"ep-size,optional"`

	// ExecutionPoolRequestTimeout is timeout used by execution pool for rpc execution
	ExecutionPoolRequestTimeout    time.Duration `hcl:"-,optional" toml:"-"`
	ExecutionPoolRequestTimeoutRaw string        `hcl:"ep-requesttimeout,optional" toml:"ep-requesttimeout,optional"`
}

type AUTHConfig struct {
	// JWTSecret is the hex-encoded jwt secret.
	JWTSecret string `hcl:"jwtsecret,optional" toml:"jwtsecret,optional"`

	// Addr is the listening address on which authenticated APIs are provided.
	Addr string `hcl:"addr,optional" toml:"addr,optional"`

	// Port is the port number on which authenticated APIs are provided.
	Port uint64 `hcl:"port,optional" toml:"port,optional"`

	// VHosts is the list of virtual hostnames which are allowed on incoming requests
	// for the authenticated api. This is by default {'localhost'}.
	VHosts []string `hcl:"vhosts,optional" toml:"vhosts,optional"`
}

type AccountsConfig struct {
	// Unlock is the list of addresses to unlock in the node
	Unlock []string `hcl:"unlock,optional" toml:"unlock,optional"`

	// PasswordFile is the file where the account passwords are stored
	PasswordFile string `hcl:"password,optional" toml:"password,optional"`

	// AllowInsecureUnlock allows user to unlock accounts in unsafe http environment.
	AllowInsecureUnlock bool `hcl:"allow-insecure-unlock,optional" toml:"allow-insecure-unlock,optional"`

	// UseLightweightKDF enables a faster but less secure encryption of accounts
	UseLightweightKDF bool `hcl:"lightkdf,optional" toml:"lightkdf,optional"`

	// DisableEireneWallet disables the personal wallet endpoints
	DisableEireneWallet bool `hcl:"disable-eirene-wallet,optional" toml:"disable-eirene-wallet,optional"`
}

type CacheConfig struct {
	// Cache is the amount of cache of the node
	Cache uint64 `hcl:"cache,optional" toml:"cache,optional"`

	// PercGc is percentage of cache used for garbage collection
	PercGc uint64 `hcl:"gc,optional" toml:"gc,optional"`

	// PercSnapshot is percentage of cache used for snapshots
	PercSnapshot uint64 `hcl:"snapshot,optional" toml:"snapshot,optional"`

	// PercDatabase is percentage of cache used for the database
	PercDatabase uint64 `hcl:"database,optional" toml:"database,optional"`

	// PercTrie is percentage of cache used for the trie
	PercTrie uint64 `hcl:"trie,optional" toml:"trie,optional"`

	// NoPrefetch is used to disable prefetch of tries
	NoPrefetch bool `hcl:"noprefetch,optional" toml:"noprefetch,optional"`

	// Preimages is used to enable the track of hash preimages
	Preimages bool `hcl:"preimages,optional" toml:"preimages,optional"`

	// TxLookupLimit sets the maximum number of blocks from head whose tx indices are reserved.
	TxLookupLimit uint64 `hcl:"txlookuplimit,optional" toml:"txlookuplimit,optional"`

	// Number of block states to keep in memory (default = 128)
	TriesInMemory uint64 `hcl:"triesinmemory,optional" toml:"triesinmemory,optional"`

	// This is the number of blocks for which logs will be cached in the filter system.
	FilterLogCacheSize int `hcl:"blocklogs,optional" toml:"blocklogs,optional"`

	// Time after which the Merkle Patricia Trie is stored to disc from memory
	TrieTimeout    time.Duration `hcl:"-,optional" toml:"-"`
	TrieTimeoutRaw string        `hcl:"timeout,optional" toml:"timeout,optional"`

	// Raise the open file descriptor resource limit (default = system fd limit)
	FDLimit int `hcl:"fdlimit,optional" toml:"fdlimit,optional"`
}

type Command struct {
	UI cli.Ui
	// contains filtered or unexported fields
}

type Config struct {

	// Chain is the chain to sync with
	Chain string `hcl:"chain,optional" toml:"chain,optional"`

	// Identity of the node
	Identity string `hcl:"identity,optional" toml:"identity,optional"`

	// RequiredBlocks is a list of required (block number, hash) pairs to accept
	RequiredBlocks map[string]string `hcl:"eth.requiredblocks,optional" toml:"eth.requiredblocks,optional"`

	// Verbosity is the level of the logs to put out
	Verbosity int `hcl:"verbosity,optional" toml:"verbosity,optional"`

	// LogLevel is the level of the logs to put out
	LogLevel string `hcl:"log-level,optional" toml:"log-level,optional"`

	// Record information useful for VM and contract debugging
	EnablePreimageRecording bool `hcl:"vmdebug,optional" toml:"vmdebug,optional"`

	// DataDir is the directory to store the state in
	DataDir string `hcl:"datadir,optional" toml:"datadir,optional"`

	// Ancient is the directory to store the state in
	Ancient string `hcl:"ancient,optional" toml:"ancient,optional"`

	// DBEngine is used to select leveldb or pebble as database
	DBEngine string `hcl:"db.engine,optional" toml:"db.engine,optional"`

	// KeyStoreDir is the directory to store keystores
	KeyStoreDir string `hcl:"keystore,optional" toml:"keystore,optional"`

	// Maximum number of messages in a batch (default=100, use 0 for no limits)
	RPCBatchLimit uint64 `hcl:"rpc.batchlimit,optional" toml:"rpc.batchlimit,optional"`

	// Maximum size (in bytes) a result of an rpc request could have (default=100000, use 0 for no limits)
	RPCReturnDataLimit uint64 `hcl:"rpc.returndatalimit,optional" toml:"rpc.returndatalimit,optional"`

	// SyncMode selects the sync protocol
	SyncMode string `hcl:"syncmode,optional" toml:"syncmode,optional"`

	// GcMode selects the garbage collection mode for the trie
	GcMode string `hcl:"gcmode,optional" toml:"gcmode,optional"`

	// state.scheme selects the Scheme to use for storing zenanet state ('hash' or 'path')
	StateScheme string `hcl:"state.scheme,optional" toml:"state.scheme,optional"`

	// Snapshot enables the snapshot database mode
	Snapshot bool `hcl:"snapshot,optional" toml:"snapshot,optional"`

	// EireneLogs enables eirene log retrieval
	EireneLogs bool `hcl:"eirene.logs,optional" toml:"eirene.logs,optional"`

	// Ethstats is the address of the ethstats server to send telemetry
	Ethstats string `hcl:"ethstats,optional" toml:"ethstats,optional"`

	// Logging has the logging related settings
	Logging *LoggingConfig `hcl:"log,block" toml:"log,block"`

	// P2P has the p2p network related settings
	P2P *P2PConfig `hcl:"p2p,block" toml:"p2p,block"`

	// Harmonia has the harmonia connection related settings
	Harmonia *HarmoniaConfig `hcl:"harmonia,block" toml:"harmonia,block"`

	// TxPool has the transaction pool related settings
	TxPool *TxPoolConfig `hcl:"txpool,block" toml:"txpool,block"`

	// Sealer has the validator related settings
	Sealer *SealerConfig `hcl:"miner,block" toml:"miner,block"`

	// JsonRPC has the json-rpc related settings
	JsonRPC *JsonRPCConfig `hcl:"jsonrpc,block" toml:"jsonrpc,block"`

	// Gpo has the gas price oracle related settings
	Gpo *GpoConfig `hcl:"gpo,block" toml:"gpo,block"`

	// Telemetry has the telemetry related settings
	Telemetry *TelemetryConfig `hcl:"telemetry,block" toml:"telemetry,block"`

	// Cache has the cache related settings
	Cache *CacheConfig `hcl:"cache,block" toml:"cache,block"`

	ExtraDB *ExtraDBConfig `hcl:"leveldb,block" toml:"leveldb,block"`

	// Account has the validator account related settings
	Accounts *AccountsConfig `hcl:"accounts,block" toml:"accounts,block"`

	// GRPC has the grpc server related settings
	GRPC *GRPCConfig `hcl:"grpc,block" toml:"grpc,block"`

	// Developer has the developer mode related settings
	Developer *DeveloperConfig `hcl:"developer,block" toml:"developer,block"`

	// ParallelEVM has the parallel evm related settings
	ParallelEVM *ParallelEVMConfig `hcl:"parallelevm,block" toml:"parallelevm,block"`

	// Develop Fake Author mode to produce blocks without authorisation
	DevFakeAuthor bool `hcl:"devfakeauthor,optional" toml:"devfakeauthor,optional"`

	// Pprof has the pprof related settings
	Pprof *PprofConfig `hcl:"pprof,block" toml:"pprof,block"`
	// contains filtered or unexported fields
}

type DeveloperConfig struct {
	// Enabled enables the developer mode
	Enabled bool `hcl:"dev,optional" toml:"dev,optional"`

	// Period is the block period to use in developer mode
	Period uint64 `hcl:"period,optional" toml:"period,optional"`

	// Initial block gas limit
	GasLimit uint64 `hcl:"gaslimit,optional" toml:"gaslimit,optional"`
}

type ExtraDBConfig struct {
	LevelDbCompactionTableSize           uint64  `hcl:"compactiontablesize,optional" toml:"compactiontablesize,optional"`
	LevelDbCompactionTableSizeMultiplier float64 `hcl:"compactiontablesizemultiplier,optional" toml:"compactiontablesizemultiplier,optional"`
	LevelDbCompactionTotalSize           uint64  `hcl:"compactiontotalsize,optional" toml:"compactiontotalsize,optional"`
	LevelDbCompactionTotalSizeMultiplier float64 `hcl:"compactiontotalsizemultiplier,optional" toml:"compactiontotalsizemultiplier,optional"`
}

type GRPCConfig struct {
	// Addr is the bind address for the grpc rpc server
	Addr string `hcl:"addr,optional" toml:"addr,optional"`
}

type GpoConfig struct {
	// Blocks is the number of blocks to track to compute the price oracle
	Blocks uint64 `hcl:"blocks,optional" toml:"blocks,optional"`

	// Percentile sets the weights to new blocks
	Percentile uint64 `hcl:"percentile,optional" toml:"percentile,optional"`

	// Maximum header history of gasprice oracle
	MaxHeaderHistory int `hcl:"maxheaderhistory,optional" toml:"maxheaderhistory,optional"`

	// Maximum block history of gasprice oracle
	MaxBlockHistory int `hcl:"maxblockhistory,optional" toml:"maxblockhistory,optional"`

	// MaxPrice is an upper bound gas price
	MaxPrice    *big.Int `hcl:"-,optional" toml:"-"`
	MaxPriceRaw string   `hcl:"maxprice,optional" toml:"maxprice,optional"`

	// IgnorePrice is a lower bound gas price
	IgnorePrice    *big.Int `hcl:"-,optional" toml:"-"`
	IgnorePriceRaw string   `hcl:"ignoreprice,optional" toml:"ignoreprice,optional"`
}

type HarmoniaConfig struct {
	// URL is the url of the harmonia server
	URL string `hcl:"url,optional" toml:"url,optional"`

	// Without is used to disable remote harmonia during testing
	Without bool `hcl:"eirene.without,optional" toml:"eirene.without,optional"`

	// GRPCAddress is the address of the harmonia grpc server
	GRPCAddress string `hcl:"grpc-address,optional" toml:"grpc-address,optional"`

	// RunHarmonia is used to run harmonia as a child process
	RunHarmonia bool `hcl:"eirene.runharmonia,optional" toml:"eirene.runharmonia,optional"`

	// RunHarmonia args are the arguments to run harmonia with
	RunHarmoniaArgs string `hcl:"eirene.runharmoniaargs,optional" toml:"eirene.runharmoniaargs,optional"`

	// UseHarmoniaApp is used to fetch data from harmonia app when running harmonia as a child process
	UseHarmoniaApp bool `hcl:"eirene.useharmoniaapp,optional" toml:"eirene.useharmoniaapp,optional"`
}

type HttpTimeouts struct {
	// ReadTimeout is the maximum duration for reading the entire
	// request, including the body.
	//
	// Because ReadTimeout does not let Handlers make per-request
	// decisions on each request body's acceptable deadline or
	// upload rate, most users will prefer to use
	// ReadHeaderTimeout. It is valid to use them both.
	ReadTimeout    time.Duration `hcl:"-,optional" toml:"-"`
	ReadTimeoutRaw string        `hcl:"read,optional" toml:"read,optional"`

	// WriteTimeout is the maximum duration before timing out
	// writes of the response. It is reset whenever a new
	// request's header is read. Like ReadTimeout, it does not
	// let Handlers make decisions on a per-request basis.
	WriteTimeout    time.Duration `hcl:"-,optional" toml:"-"`
	WriteTimeoutRaw string        `hcl:"write,optional" toml:"write,optional"`

	// IdleTimeout is the maximum amount of time to wait for the
	// next request when keep-alives are enabled. If IdleTimeout
	// is zero, the value of ReadTimeout is used. If both are
	// zero, ReadHeaderTimeout is used.
	IdleTimeout    time.Duration `hcl:"-,optional" toml:"-"`
	IdleTimeoutRaw string        `hcl:"idle,optional" toml:"idle,optional"`
}

type InfluxDBConfig struct {
	// V1Enabled enables influx v1 mode
	V1Enabled bool `hcl:"influxdb,optional" toml:"influxdb,optional"`

	// Endpoint is the url endpoint of the influxdb service
	Endpoint string `hcl:"endpoint,optional" toml:"endpoint,optional"`

	// Database is the name of the database in Influxdb to store the metrics.
	Database string `hcl:"database,optional" toml:"database,optional"`

	// Enabled is the username to authorize access to Influxdb
	Username string `hcl:"username,optional" toml:"username,optional"`

	// Password is the password to authorize access to Influxdb
	Password string `hcl:"password,optional" toml:"password,optional"`

	// Tags are tags attaches to all generated metrics
	Tags map[string]string `hcl:"tags,optional" toml:"tags,optional"`

	// Enabled enables influx v2 mode
	V2Enabled bool `hcl:"influxdbv2,optional" toml:"influxdbv2,optional"`

	// Token is the token to authorize access to Influxdb V2.
	Token string `hcl:"token,optional" toml:"token,optional"`

	// Bucket is the bucket to store metrics in Influxdb V2.
	Bucket string `hcl:"bucket,optional" toml:"bucket,optional"`

	// Organization is the name of the organization for Influxdb V2.
	Organization string `hcl:"organization,optional" toml:"organization,optional"`
}

type JsonRPCConfig struct {
	// IPCDisable enables whether ipc is enabled or not
	IPCDisable bool `hcl:"ipcdisable,optional" toml:"ipcdisable,optional"`

	// IPCPath is the path of the ipc endpoint
	IPCPath string `hcl:"ipcpath,optional" toml:"ipcpath,optional"`

	// GasCap is the global gas cap for eth-call variants.
	GasCap uint64 `hcl:"gascap,optional" toml:"gascap,optional"`

	// Sets a timeout used for eth_call (0=infinite)
	RPCEVMTimeout    time.Duration `hcl:"-,optional" toml:"-"`
	RPCEVMTimeoutRaw string        `hcl:"evmtimeout,optional" toml:"evmtimeout,optional"`

	// TxFeeCap is the global transaction fee cap for send-transaction variants
	TxFeeCap float64 `hcl:"txfeecap,optional" toml:"txfeecap,optional"`

	// Http has the json-rpc http related settings
	Http *APIConfig `hcl:"http,block" toml:"http,block"`

	// Ws has the json-rpc websocket related settings
	Ws *APIConfig `hcl:"ws,block" toml:"ws,block"`

	// Graphql has the json-rpc graphql related settings
	Graphql *APIConfig `hcl:"graphql,block" toml:"graphql,block"`

	// AUTH RPC related settings
	Auth *AUTHConfig `hcl:"auth,block" toml:"auth,block"`

	HttpTimeout *HttpTimeouts `hcl:"timeouts,block" toml:"timeouts,block"`

	AllowUnprotectedTxs bool `hcl:"allow-unprotected-txs,optional" toml:"allow-unprotected-txs,optional"`

	// EnablePersonal enables the deprecated personal namespace.
	EnablePersonal bool `hcl:"enabledeprecatedpersonal,optional" toml:"enabledeprecatedpersonal,optional"`
}

type LoggingConfig struct {
	// Per-module verbosity: comma-separated list of <pattern>=<level> (e.g. eth/*=5,p2p=4)
	Vmodule string `hcl:"vmodule,optional" toml:"vmodule,optional"`

	// Format logs with JSON
	Json bool `hcl:"json,optional" toml:"json,optional"`

	// Request a stack trace at a specific logging statement (e.g. "block.go:271")
	Backtrace string `hcl:"backtrace,optional" toml:"backtrace,optional"`

	// Prepends log messages with call-site location (file and line number)
	Debug bool `hcl:"debug,optional" toml:"debug,optional"`

	// EnableBlockTracking allows logging of information collected while tracking block lifecycle
	EnableBlockTracking bool `hcl:"enable-block-tracking,optional" toml:"enable-block-tracking,optional"`
}

type P2PConfig struct {
	// MaxPeers sets the maximum number of connected peers
	MaxPeers uint64 `hcl:"maxpeers,optional" toml:"maxpeers,optional"`

	// MaxPendPeers sets the maximum number of pending connected peers
	MaxPendPeers uint64 `hcl:"maxpendpeers,optional" toml:"maxpendpeers,optional"`

	// Bind is the bind address
	Bind string `hcl:"bind,optional" toml:"bind,optional"`

	// Port is the port number
	Port uint64 `hcl:"port,optional" toml:"port,optional"`

	// NoDiscover is used to disable discovery
	NoDiscover bool `hcl:"nodiscover,optional" toml:"nodiscover,optional"`

	// NAT it used to set NAT options
	NAT string `hcl:"nat,optional" toml:"nat,optional"`

	// Connectivity can be restricted to certain IP networks.
	// If this option is set to a non-nil value, only hosts which match one of the
	// IP networks contained in the list are considered.
	NetRestrict string `hcl:"netrestrict,optional" toml:"netrestrict,optional"`

	// P2P node key file
	NodeKey string `hcl:"nodekey,optional" toml:"nodekey,optional"`

	// P2P node key as hex
	NodeKeyHex string `hcl:"nodekeyhex,optional" toml:"nodekeyhex,optional"`

	// Discovery has the p2p discovery related settings
	Discovery *P2PDiscovery `hcl:"discovery,block" toml:"discovery,block"`

	// TxArrivalWait sets the maximum duration the transaction fetcher will wait for
	// an announced transaction to arrive before explicitly requesting it
	TxArrivalWait    time.Duration `hcl:"-,optional" toml:"-"`
	TxArrivalWaitRaw string        `hcl:"txarrivalwait,optional" toml:"txarrivalwait,optional"`
}

type P2PDiscovery struct {
	// DiscoveryV4 specifies whether V4 discovery should be started.
	DiscoveryV4 bool `hcl:"v4disc,optional" toml:"v4disc,optional"`

	// V5Enabled is used to enable disc v5 discovery mode
	V5Enabled bool `hcl:"v5disc,optional" toml:"v5disc,optional"`

	// Bootnodes is the list of initial bootnodes
	Bootnodes []string `hcl:"bootnodes,optional" toml:"bootnodes,optional"`

	// BootnodesV4 is the list of initial v4 bootnodes
	BootnodesV4 []string `hcl:"bootnodesv4,optional" toml:"bootnodesv4,optional"`

	// BootnodesV5 is the list of initial v5 bootnodes
	BootnodesV5 []string `hcl:"bootnodesv5,optional" toml:"bootnodesv5,optional"`

	// StaticNodes is the list of static nodes
	StaticNodes []string `hcl:"static-nodes,optional" toml:"static-nodes,optional"`

	// TrustedNodes is the list of trusted nodes
	TrustedNodes []string `hcl:"trusted-nodes,optional" toml:"trusted-nodes,optional"`

	// DNS is the list of enrtree:// URLs which will be queried for nodes to connect to
	DNS []string `hcl:"dns,optional" toml:"dns,optional"`
}

type ParallelEVMConfig struct {
	Enable bool `hcl:"enable,optional" toml:"enable,optional"`

	SpeculativeProcesses int `hcl:"procs,optional" toml:"procs,optional"`
}

type PprofConfig struct {
	// Enableed enable the pprof HTTP server
	Enabled bool `hcl:"pprof,optional" toml:"pprof,optional"`

	// pprof HTTP server listening port
	Port int `hcl:"port,optional" toml:"port,optional"`

	// pprof HTTP server listening interface
	Addr string `hcl:"addr,optional" toml:"addr,optional"`

	// Turn on memory profiling with the given rate
	MemProfileRate int `hcl:"memprofilerate,optional" toml:"memprofilerate,optional"`

	// Turn on block profiling with the given rate
	BlockProfileRate int `hcl:"blockprofilerate,optional" toml:"blockprofilerate,optional"`
}

type SealerConfig struct {
	// Enabled is used to enable validator mode
	Enabled bool `hcl:"mine,optional" toml:"mine,optional"`

	// Zenbase is the address of the validator
	Zenbase string `hcl:"zenbase,optional" toml:"zenbase,optional"`

	// ExtraData is the block extra data set by the miner
	ExtraData string `hcl:"extradata,optional" toml:"extradata,optional"`

	// GasCeil is the target gas ceiling for mined blocks.
	GasCeil uint64 `hcl:"gaslimit,optional" toml:"gaslimit,optional"`

	// GasPrice is the minimum gas price for mining a transaction
	GasPrice    *big.Int `hcl:"-,optional" toml:"-"`
	GasPriceRaw string   `hcl:"gasprice,optional" toml:"gasprice,optional"`

	// The time interval for miner to re-create mining work.
	Recommit    time.Duration `hcl:"-,optional" toml:"-"`
	RecommitRaw string        `hcl:"recommit,optional" toml:"recommit,optional"`

	CommitInterruptFlag bool `hcl:"commitinterrupt,optional" toml:"commitinterrupt,optional"`
}

type Server struct {
	proto.UnimplementedeireneServer
	protobor.UnimplementedEireneApiServer
	// contains filtered or unexported fields
}

type TelemetryConfig struct {
	// Enabled enables metrics
	Enabled bool `hcl:"metrics,optional" toml:"metrics,optional"`

	// Expensive enables expensive metrics
	Expensive bool `hcl:"expensive,optional" toml:"expensive,optional"`

	// InfluxDB has the influxdb related settings
	InfluxDB *InfluxDBConfig `hcl:"influx,block" toml:"influx,block"`

	// Prometheus Address
	PrometheusAddr string `hcl:"prometheus-addr,optional" toml:"prometheus-addr,optional"`

	// Open collector endpoint
	OpenCollectorEndpoint string `hcl:"opencollector-endpoint,optional" toml:"opencollector-endpoint,optional"`
}

type TxPoolConfig struct {
	// Locals are the addresses that should be treated by default as local
	Locals []string `hcl:"locals,optional" toml:"locals,optional"`

	// NoLocals enables whether local transaction handling should be disabled
	NoLocals bool `hcl:"nolocals,optional" toml:"nolocals,optional"`

	// Journal is the path to store local transactions to survive node restarts
	Journal string `hcl:"journal,optional" toml:"journal,optional"`

	// Rejournal is the time interval to regenerate the local transaction journal
	Rejournal    time.Duration `hcl:"-,optional" toml:"-"`
	RejournalRaw string        `hcl:"rejournal,optional" toml:"rejournal,optional"`

	// PriceLimit is the minimum gas price to enforce for acceptance into the pool
	PriceLimit uint64 `hcl:"pricelimit,optional" toml:"pricelimit,optional"`

	// PriceBump is the minimum price bump percentage to replace an already existing transaction (nonce)
	PriceBump uint64 `hcl:"pricebump,optional" toml:"pricebump,optional"`

	// AccountSlots is the number of executable transaction slots guaranteed per account
	AccountSlots uint64 `hcl:"accountslots,optional" toml:"accountslots,optional"`

	// GlobalSlots is the maximum number of executable transaction slots for all accounts
	GlobalSlots uint64 `hcl:"globalslots,optional" toml:"globalslots,optional"`

	// AccountQueue is the maximum number of non-executable transaction slots permitted per account
	AccountQueue uint64 `hcl:"accountqueue,optional" toml:"accountqueue,optional"`

	// GlobalQueueis the maximum number of non-executable transaction slots for all accounts
	GlobalQueue uint64 `hcl:"globalqueue,optional" toml:"globalqueue,optional"`

	// lifetime is the maximum amount of time non-executable transaction are queued
	LifeTime    time.Duration `hcl:"-,optional" toml:"-"`
	LifeTimeRaw string        `hcl:"lifetime,optional" toml:"lifetime,optional"`
}