ledger

type BlockAndPvtData struct {
	Block        *common.Block
	BlockPvtData map[uint64]*TxPvtData
	Missing      []MissingPrivateData
}

type HistoryQueryExecutor interface {
	// GetHistoryForKey retrieves the history of values for a key.
	// The returned ResultsIterator contains results of type *KeyModification which is defined in protos/ledger/queryresult.
	GetHistoryForKey(namespace string, key string) (commonledger.ResultsIterator, error)
}

type MissingPrivateData struct {
	TxId       string
	SeqInBlock int
	Namespace  string
	Collection string
}

type PeerLedger interface {
	commonledger.Ledger
	// GetTransactionByID retrieves a transaction by id
	GetTransactionByID(txID string) (*peer.ProcessedTransaction, error)
	// GetBlockByHash returns a block given it's hash
	GetBlockByHash(blockHash []byte) (*common.Block, error)
	// GetBlockByTxID returns a block which contains a transaction
	GetBlockByTxID(txID string) (*common.Block, error)
	// GetTxValidationCodeByTxID returns reason code of transaction validation
	GetTxValidationCodeByTxID(txID string) (peer.TxValidationCode, error)
	// NewTxSimulator gives handle to a transaction simulator.
	// A client can obtain more than one 'TxSimulator's for parallel execution.
	// Any snapshoting/synchronization should be performed at the implementation level if required
	NewTxSimulator(txid string) (TxSimulator, error)
	// NewQueryExecutor gives handle to a query executor.
	// A client can obtain more than one 'QueryExecutor's for parallel execution.
	// Any synchronization should be performed at the implementation level if required
	NewQueryExecutor() (QueryExecutor, error)
	// NewHistoryQueryExecutor gives handle to a history query executor.
	// A client can obtain more than one 'HistoryQueryExecutor's for parallel execution.
	// Any synchronization should be performed at the implementation level if required
	NewHistoryQueryExecutor() (HistoryQueryExecutor, error)
	// GetPvtDataAndBlockByNum returns the block and the corresponding pvt data.
	// The pvt data is filtered by the list of 'ns/collections' supplied
	// A nil filter does not filter any results and causes retrieving all the pvt data for the given blockNum
	GetPvtDataAndBlockByNum(blockNum uint64, filter PvtNsCollFilter) (*BlockAndPvtData, error)
	// GetPvtDataByNum returns only the pvt data  corresponding to the given block number
	// The pvt data is filtered by the list of 'ns/collections' supplied in the filter
	// A nil filter does not filter any results and causes retrieving all the pvt data for the given blockNum
	GetPvtDataByNum(blockNum uint64, filter PvtNsCollFilter) ([]*TxPvtData, error)
	// CommitWithPvtData commits the block and the corresponding pvt data in an atomic operation
	CommitWithPvtData(blockAndPvtdata *BlockAndPvtData) error
	// Purge removes private read-writes set generated by endorsers at block height lesser than
	// a given maxBlockNumToRetain. In other words, Purge only retains private read-write sets
	// that were generated at block height of maxBlockNumToRetain or higher.
	PurgePrivateData(maxBlockNumToRetain uint64) error
	// PrivateDataMinBlockNum returns the lowest retained endorsement block height
	PrivateDataMinBlockNum() (uint64, error)
	//Prune prunes the blocks/transactions that satisfy the given policy
	Prune(policy commonledger.PrunePolicy) error
}

type PeerLedgerProvider interface {
	// Create creates a new ledger with the given genesis block.
	// This function guarantees that the creation of ledger and committing the genesis block would an atomic action
	// The chain id retrieved from the genesis block is treated as a ledger id
	Create(genesisBlock *common.Block) (PeerLedger, error)
	// Open opens an already created ledger
	Open(ledgerID string) (PeerLedger, error)
	// Exists tells whether the ledger with given id exists
	Exists(ledgerID string) (bool, error)
	// List lists the ids of the existing ledgers
	List() ([]string, error)
	// Close closes the PeerLedgerProvider
	Close()
}

type PvtCollFilter map[string]bool

type PvtNsCollFilter map[string]PvtCollFilter

type QueryExecutor interface {
	// GetState gets the value for given namespace and key. For a chaincode, the namespace corresponds to the chaincodeId
	GetState(namespace string, key string) ([]byte, error)
	// GetStateMultipleKeys gets the values for multiple keys in a single call
	GetStateMultipleKeys(namespace string, keys []string) ([][]byte, error)
	// GetStateRangeScanIterator returns an iterator that contains all the key-values between given key ranges.
	// startKey is included in the results and endKey is excluded. An empty startKey refers to the first available key
	// and an empty endKey refers to the last available key. For scanning all the keys, both the startKey and the endKey
	// can be supplied as empty strings. However, a full scan should be used judiciously for performance reasons.
	// The returned ResultsIterator contains results of type *KV which is defined in protos/ledger/queryresult.
	GetStateRangeScanIterator(namespace string, startKey string, endKey string) (commonledger.ResultsIterator, error)
	// ExecuteQuery executes the given query and returns an iterator that contains results of type specific to the underlying data store.
	// Only used for state databases that support query
	// For a chaincode, the namespace corresponds to the chaincodeId
	// The returned ResultsIterator contains results of type *KV which is defined in protos/ledger/queryresult.
	ExecuteQuery(namespace, query string) (commonledger.ResultsIterator, error)
	// GetPrivateData gets the value of a private data item identified by a tuple <namespace, collection, key>
	GetPrivateData(namespace, collection, key string) ([]byte, error)
	// GetPrivateDataMultipleKeys gets the values for the multiple private data items in a single call
	GetPrivateDataMultipleKeys(namespace, collection string, keys []string) ([][]byte, error)
	// GetPrivateDataRangeScanIterator returns an iterator that contains all the key-values between given key ranges.
	// startKey is included in the results and endKey is excluded. An empty startKey refers to the first available key
	// and an empty endKey refers to the last available key. For scanning all the keys, both the startKey and the endKey
	// can be supplied as empty strings. However, a full scan shuold be used judiciously for performance reasons.
	// The returned ResultsIterator contains results of type *KV which is defined in protos/ledger/queryresult.
	GetPrivateDataRangeScanIterator(namespace, collection, startKey, endKey string) (commonledger.ResultsIterator, error)
	// ExecuteQuery executes the given query and returns an iterator that contains results of type specific to the underlying data store.
	// Only used for state databases that support query
	// For a chaincode, the namespace corresponds to the chaincodeId
	// The returned ResultsIterator contains results of type *KV which is defined in protos/ledger/queryresult.
	ExecuteQueryOnPrivateData(namespace, collection, query string) (commonledger.ResultsIterator, error)
	// Done releases resources occupied by the QueryExecutor
	Done()
}

type TxPvtData struct {
	SeqInBlock uint64
	WriteSet   *rwset.TxPvtReadWriteSet
}

type TxSimulationResults struct {
	PubSimulationResults *rwset.TxReadWriteSet
	PvtSimulationResults *rwset.TxPvtReadWriteSet
	SimulationBlkHt      uint64
}

type TxSimulator interface {
	QueryExecutor
	// SetState sets the given value for the given namespace and key. For a chaincode, the namespace corresponds to the chaincodeId
	SetState(namespace string, key string, value []byte) error
	// DeleteState deletes the given namespace and key
	DeleteState(namespace string, key string) error
	// SetMultipleKeys sets the values for multiple keys in a single call
	SetStateMultipleKeys(namespace string, kvs map[string][]byte) error
	// ExecuteUpdate for supporting rich data model (see comments on QueryExecutor above)
	ExecuteUpdate(query string) error
	// SetPrivateData sets the given value to a key in the private data state represented by the tuple <namespace, collection, key>
	SetPrivateData(namespace, collection, key string, value []byte) error
	// SetPrivateDataMultipleKeys sets the values for multiple keys in the private data space in a single call
	SetPrivateDataMultipleKeys(namespace, collection string, kvs map[string][]byte) error
	// DeletePrivateData deletes the given tuple <namespace, collection, key> from private data
	DeletePrivateData(namespace, collection, key string) error
	// GetTxSimulationResults encapsulates the results of the transaction simulation.
	// This should contain enough detail for
	// - The update in the state that would be caused if the transaction is to be committed
	// - The environment in which the transaction is executed so as to be able to decide the validity of the environment
	//   (at a later time on a different peer) during committing the transactions
	// Different ledger implementation (or configurations of a single implementation) may want to represent the above two pieces
	// of information in different way in order to support different data-models or optimize the information representations.
	// Returned type 'TxSimulationResults' contains the simulation results for both the public data and the private data.
	// The public data simulation results are expected to be used as in V1 while the private data simulation results are expected
	// to be used by the gossip to disseminate this to the other endorsers (in phase-2 of sidedb)
	GetTxSimulationResults() (*TxSimulationResults, error)
}

type ValidatedLedger interface {
	commonledger.Ledger
}