v1beta1

type AnonymousAuthCondition struct {
	// Path for which anonymous auth is enabled.
	Path string `json:"path"`
}

type AnonymousAuthConfig struct {
	Enabled bool `json:"enabled"`

	// If set, anonymous auth is only allowed if the request meets one of the
	// conditions.
	Conditions []AnonymousAuthCondition `json:"conditions,omitempty"`
}

type AudienceMatchPolicyType string

type AuthenticationConfiguration struct {
	metav1.TypeMeta

	// jwt is a list of authenticator to authenticate Kubernetes users using
	// JWT compliant tokens. The authenticator will attempt to parse a raw ID token,
	// verify it's been signed by the configured issuer. The public key to verify the
	// signature is discovered from the issuer's public endpoint using OIDC discovery.
	// For an incoming token, each JWT authenticator will be attempted in
	// the order in which it is specified in this list.  Note however that
	// other authenticators may run before or after the JWT authenticators.
	// The specific position of JWT authenticators in relation to other
	// authenticators is neither defined nor stable across releases.  Since
	// each JWT authenticator must have a unique issuer URL, at most one
	// JWT authenticator will attempt to cryptographically validate the token.
	//
	// The minimum valid JWT payload must contain the following claims:
	// {
	//		"iss": "https://issuer.example.com",
	//		"aud": ["audience"],
	//		"exp": 1234567890,
	//		"<username claim>": "username"
	// }
	JWT []JWTAuthenticator `json:"jwt"`

	// If present --anonymous-auth must not be set
	Anonymous *AnonymousAuthConfig `json:"anonymous,omitempty"`
}

type AuthorizationConfiguration struct {
	metav1.TypeMeta

	// Authorizers is an ordered list of authorizers to
	// authorize requests against.
	// This is similar to the --authorization-modes kube-apiserver flag
	// Must be at least one.
	Authorizers []AuthorizerConfiguration `json:"authorizers"`
}

type AuthorizerConfiguration struct {
	// Type refers to the type of the authorizer
	// "Webhook" is supported in the generic API server
	// Other API servers may support additional authorizer
	// types like Node, RBAC, ABAC, etc.
	Type string `json:"type"`

	// Name used to describe the webhook
	// This is explicitly used in monitoring machinery for metrics
	// Note: Names must be DNS1123 labels like `myauthorizername` or
	//		 subdomains like `myauthorizer.example.domain`
	// Required, with no default
	Name string `json:"name"`

	// Webhook defines the configuration for a Webhook authorizer
	// Must be defined when Type=Webhook
	// Must not be defined when Type!=Webhook
	Webhook *WebhookConfiguration `json:"webhook,omitempty"`
}

type AuthorizerType string

type ClaimMappings struct {
	// username represents an option for the username attribute.
	// The claim's value must be a singular string.
	// Same as the --oidc-username-claim and --oidc-username-prefix flags.
	// If username.expression is set, the expression must produce a string value.
	// If username.expression uses 'claims.email', then 'claims.email_verified' must be used in
	// username.expression or extra[*].valueExpression or claimValidationRules[*].expression.
	// An example claim validation rule expression that matches the validation automatically
	// applied when username.claim is set to 'email' is 'claims.?email_verified.orValue(true) == true'. By explicitly comparing
	// the value to true, we let type-checking see the result will be a boolean, and to make sure a non-boolean email_verified
	// claim will be caught at runtime.
	//
	// In the flag based approach, the --oidc-username-claim and --oidc-username-prefix are optional. If --oidc-username-claim is not set,
	// the default value is "sub". For the authentication config, there is no defaulting for claim or prefix. The claim and prefix must be set explicitly.
	// For claim, if --oidc-username-claim was not set with legacy flag approach, configure username.claim="sub" in the authentication config.
	// For prefix:
	//     (1) --oidc-username-prefix="-", no prefix was added to the username. For the same behavior using authentication config,
	//         set username.prefix=""
	//     (2) --oidc-username-prefix="" and  --oidc-username-claim != "email", prefix was "<value of --oidc-issuer-url>#". For the same
	//         behavior using authentication config, set username.prefix="<value of issuer.url>#"
	//     (3) --oidc-username-prefix="<value>". For the same behavior using authentication config, set username.prefix="<value>"
	// +required
	Username PrefixedClaimOrExpression `json:"username"`
	// groups represents an option for the groups attribute.
	// The claim's value must be a string or string array claim.
	// If groups.claim is set, the prefix must be specified (and can be the empty string).
	// If groups.expression is set, the expression must produce a string or string array value.
	//  "", [], and null values are treated as the group mapping not being present.
	// +optional
	Groups PrefixedClaimOrExpression `json:"groups,omitempty"`

	// uid represents an option for the uid attribute.
	// Claim must be a singular string claim.
	// If uid.expression is set, the expression must produce a string value.
	// +optional
	UID ClaimOrExpression `json:"uid"`

	// extra represents an option for the extra attribute.
	// expression must produce a string or string array value.
	// If the value is empty, the extra mapping will not be present.
	//
	// hard-coded extra key/value
	// - key: "foo"
	//   valueExpression: "'bar'"
	// This will result in an extra attribute - foo: ["bar"]
	//
	// hard-coded key, value copying claim value
	// - key: "foo"
	//   valueExpression: "claims.some_claim"
	// This will result in an extra attribute - foo: [value of some_claim]
	//
	// hard-coded key, value derived from claim value
	// - key: "admin"
	//   valueExpression: '(has(claims.is_admin) && claims.is_admin) ? "true":""'
	// This will result in:
	//  - if is_admin claim is present and true, extra attribute - admin: ["true"]
	//  - if is_admin claim is present and false or is_admin claim is not present, no extra attribute will be added
	//
	// +optional
	Extra []ExtraMapping `json:"extra,omitempty"`
}

type ClaimOrExpression struct {
	// claim is the JWT claim to use.
	// Either claim or expression must be set.
	// Mutually exclusive with expression.
	// +optional
	Claim string `json:"claim,omitempty"`

	// expression represents the expression which will be evaluated by CEL.
	//
	// CEL expressions have access to the contents of the token claims, organized into CEL variable:
	// - 'claims' is a map of claim names to claim values.
	//   For example, a variable named 'sub' can be accessed as 'claims.sub'.
	//   Nested claims can be accessed using dot notation, e.g. 'claims.foo.bar'.
	//
	// Documentation on CEL: https://kubernetes.io/docs/reference/using-api/cel/
	//
	// Mutually exclusive with claim.
	// +optional
	Expression string `json:"expression,omitempty"`
}

type ClaimValidationRule struct {
	// claim is the name of a required claim.
	// Same as --oidc-required-claim flag.
	// Only string claim keys are supported.
	// Mutually exclusive with expression and message.
	// +optional
	Claim string `json:"claim,omitempty"`
	// requiredValue is the value of a required claim.
	// Same as --oidc-required-claim flag.
	// Only string claim values are supported.
	// If claim is set and requiredValue is not set, the claim must be present with a value set to the empty string.
	// Mutually exclusive with expression and message.
	// +optional
	RequiredValue string `json:"requiredValue,omitempty"`

	// expression represents the expression which will be evaluated by CEL.
	// Must produce a boolean.
	//
	// CEL expressions have access to the contents of the token claims, organized into CEL variable:
	// - 'claims' is a map of claim names to claim values.
	//   For example, a variable named 'sub' can be accessed as 'claims.sub'.
	//   Nested claims can be accessed using dot notation, e.g. 'claims.foo.bar'.
	// Must return true for the validation to pass.
	//
	// Documentation on CEL: https://kubernetes.io/docs/reference/using-api/cel/
	//
	// Mutually exclusive with claim and requiredValue.
	// +optional
	Expression string `json:"expression,omitempty"`
	// message customizes the returned error message when expression returns false.
	// message is a literal string.
	// Mutually exclusive with claim and requiredValue.
	// +optional
	Message string `json:"message,omitempty"`
}

type Connection struct {
	// Protocol is the protocol used to connect from client to the konnectivity server.
	ProxyProtocol ProtocolType `json:"proxyProtocol,omitempty"`

	// Transport defines the transport configurations we use to dial to the konnectivity server.
	// This is required if ProxyProtocol is HTTPConnect or GRPC.
	// +optional
	Transport *Transport `json:"transport,omitempty"`
}

type EgressSelection struct {
	// name is the name of the egress selection.
	// Currently supported values are "controlplane", "master", "etcd" and "cluster"
	// The "master" egress selector is deprecated in favor of "controlplane"
	Name string `json:"name"`

	// connection is the exact information used to configure the egress selection
	Connection Connection `json:"connection"`
}

type EgressSelectorConfiguration struct {
	metav1.TypeMeta `json:",inline"`

	// connectionServices contains a list of egress selection client configurations
	EgressSelections []EgressSelection `json:"egressSelections"`
}

type EgressSelectorType string

type ExtraMapping struct {
	// key is a string to use as the extra attribute key.
	// key must be a domain-prefix path (e.g. example.org/foo). All characters before the first "/" must be a valid
	// subdomain as defined by RFC 1123. All characters trailing the first "/" must
	// be valid HTTP Path characters as defined by RFC 3986.
	// key must be lowercase.
	// Required to be unique.
	// +required
	Key string `json:"key"`

	// valueExpression is a CEL expression to extract extra attribute value.
	// valueExpression must produce a string or string array value.
	// "", [], and null values are treated as the extra mapping not being present.
	// Empty string values contained within a string array are filtered out.
	//
	// CEL expressions have access to the contents of the token claims, organized into CEL variable:
	// - 'claims' is a map of claim names to claim values.
	//   For example, a variable named 'sub' can be accessed as 'claims.sub'.
	//   Nested claims can be accessed using dot notation, e.g. 'claims.foo.bar'.
	//
	// Documentation on CEL: https://kubernetes.io/docs/reference/using-api/cel/
	//
	// +required
	ValueExpression string `json:"valueExpression"`
}

type Issuer struct {
	// url points to the issuer URL in a format https://url or https://url/path.
	// This must match the "iss" claim in the presented JWT, and the issuer returned from discovery.
	// Same value as the --oidc-issuer-url flag.
	// Discovery information is fetched from "{url}/.well-known/openid-configuration" unless overridden by discoveryURL.
	// Required to be unique across all JWT authenticators.
	// Note that egress selection configuration is not used for this network connection.
	// +required
	URL string `json:"url"`

	// discoveryURL, if specified, overrides the URL used to fetch discovery
	// information instead of using "{url}/.well-known/openid-configuration".
	// The exact value specified is used, so "/.well-known/openid-configuration"
	// must be included in discoveryURL if needed.
	//
	// The "issuer" field in the fetched discovery information must match the "issuer.url" field
	// in the AuthenticationConfiguration and will be used to validate the "iss" claim in the presented JWT.
	// This is for scenarios where the well-known and jwks endpoints are hosted at a different
	// location than the issuer (such as locally in the cluster).
	//
	// Example:
	// A discovery url that is exposed using kubernetes service 'oidc' in namespace 'oidc-namespace'
	// and discovery information is available at '/.well-known/openid-configuration'.
	// discoveryURL: "https://oidc.oidc-namespace/.well-known/openid-configuration"
	// certificateAuthority is used to verify the TLS connection and the hostname on the leaf certificate
	// must be set to 'oidc.oidc-namespace'.
	//
	// curl https://oidc.oidc-namespace/.well-known/openid-configuration (.discoveryURL field)
	// {
	//     issuer: "https://oidc.example.com" (.url field)
	// }
	//
	// discoveryURL must be different from url.
	// Required to be unique across all JWT authenticators.
	// Note that egress selection configuration is not used for this network connection.
	// +optional
	DiscoveryURL *string `json:"discoveryURL,omitempty"`

	// certificateAuthority contains PEM-encoded certificate authority certificates
	// used to validate the connection when fetching discovery information.
	// If unset, the system verifier is used.
	// Same value as the content of the file referenced by the --oidc-ca-file flag.
	// +optional
	CertificateAuthority string `json:"certificateAuthority,omitempty"`

	// audiences is the set of acceptable audiences the JWT must be issued to.
	// At least one of the entries must match the "aud" claim in presented JWTs.
	// Same value as the --oidc-client-id flag (though this field supports an array).
	// Required to be non-empty.
	// +required
	Audiences []string `json:"audiences"`

	// audienceMatchPolicy defines how the "audiences" field is used to match the "aud" claim in the presented JWT.
	// Allowed values are:
	// 1. "MatchAny" when multiple audiences are specified and
	// 2. empty (or unset) or "MatchAny" when a single audience is specified.
	//
	// - MatchAny: the "aud" claim in the presented JWT must match at least one of the entries in the "audiences" field.
	// For example, if "audiences" is ["foo", "bar"], the "aud" claim in the presented JWT must contain either "foo" or "bar" (and may contain both).
	//
	// - "": The match policy can be empty (or unset) when a single audience is specified in the "audiences" field. The "aud" claim in the presented JWT must contain the single audience (and may contain others).
	//
	// For more nuanced audience validation, use claimValidationRules.
	//   example: claimValidationRule[].expression: 'sets.equivalent(claims.aud, ["bar", "foo", "baz"])' to require an exact match.
	// +optional
	AudienceMatchPolicy AudienceMatchPolicyType `json:"audienceMatchPolicy,omitempty"`

	// egressSelectorType is an indicator of which egress selection should be used for sending all traffic related
	// to this issuer (discovery, JWKS, distributed claims, etc).  If unspecified, no custom dialer is used.
	// When specified, the valid choices are "controlplane" and "cluster".  These correspond to the associated
	// values in the --egress-selector-config-file.
	//
	// - controlplane: for traffic intended to go to the control plane.
	//
	// - cluster: for traffic intended to go to the system being managed by Kubernetes.
	//
	// +optional
	EgressSelectorType EgressSelectorType `json:"egressSelectorType,omitempty"`
}

type JWTAuthenticator struct {
	// issuer contains the basic OIDC provider connection options.
	// +required
	Issuer Issuer `json:"issuer"`

	// claimValidationRules are rules that are applied to validate token claims to authenticate users.
	// +optional
	ClaimValidationRules []ClaimValidationRule `json:"claimValidationRules,omitempty"`

	// claimMappings points claims of a token to be treated as user attributes.
	// +required
	ClaimMappings ClaimMappings `json:"claimMappings"`

	// userValidationRules are rules that are applied to final user before completing authentication.
	// These allow invariants to be applied to incoming identities such as preventing the
	// use of the system: prefix that is commonly used by Kubernetes components.
	// The validation rules are logically ANDed together and must all return true for the validation to pass.
	// +optional
	UserValidationRules []UserValidationRule `json:"userValidationRules,omitempty"`
}

type PrefixedClaimOrExpression struct {
	// claim is the JWT claim to use.
	// Mutually exclusive with expression.
	// +optional
	Claim string `json:"claim,omitempty"`
	// prefix is prepended to claim's value to prevent clashes with existing names.
	// prefix needs to be set if claim is set and can be the empty string.
	// Mutually exclusive with expression.
	// +optional
	Prefix *string `json:"prefix,omitempty"`

	// expression represents the expression which will be evaluated by CEL.
	//
	// CEL expressions have access to the contents of the token claims, organized into CEL variable:
	// - 'claims' is a map of claim names to claim values.
	//   For example, a variable named 'sub' can be accessed as 'claims.sub'.
	//   Nested claims can be accessed using dot notation, e.g. 'claims.foo.bar'.
	//
	// Documentation on CEL: https://kubernetes.io/docs/reference/using-api/cel/
	//
	// Mutually exclusive with claim and prefix.
	// +optional
	Expression string `json:"expression,omitempty"`
}

type ProtocolType string

type TCPTransport struct {
	// URL is the location of the konnectivity server to connect to.
	// As an example it might be "https://127.0.0.1:8131"
	URL string `json:"url,omitempty"`

	// TLSConfig is the config needed to use TLS when connecting to konnectivity server
	// +optional
	TLSConfig *TLSConfig `json:"tlsConfig,omitempty"`
}

type TLSConfig struct {
	// caBundle is the file location of the CA to be used to determine trust with the konnectivity server.
	// Must be absent/empty if TCPTransport.URL is prefixed with http://
	// If absent while TCPTransport.URL is prefixed with https://, default to system trust roots.
	// +optional
	CABundle string `json:"caBundle,omitempty"`

	// clientKey is the file location of the client key to be used in mtls handshakes with the konnectivity server.
	// Must be absent/empty if TCPTransport.URL is prefixed with http://
	// Must be configured if TCPTransport.URL is prefixed with https://
	// +optional
	ClientKey string `json:"clientKey,omitempty"`

	// clientCert is the file location of the client certificate to be used in mtls handshakes with the konnectivity server.
	// Must be absent/empty if TCPTransport.URL is prefixed with http://
	// Must be configured if TCPTransport.URL is prefixed with https://
	// +optional
	ClientCert string `json:"clientCert,omitempty"`
}

type TracingConfiguration struct {
	metav1.TypeMeta `json:",inline"`

	// Embed the component config tracing configuration struct
	tracingapi.TracingConfiguration `json:",inline"`
}

type Transport struct {
	// TCP is the TCP configuration for communicating with the konnectivity server via TCP
	// ProxyProtocol of GRPC is not supported with TCP transport at the moment
	// Requires at least one of TCP or UDS to be set
	// +optional
	TCP *TCPTransport `json:"tcp,omitempty"`

	// UDS is the UDS configuration for communicating with the konnectivity server via UDS
	// Requires at least one of TCP or UDS to be set
	// +optional
	UDS *UDSTransport `json:"uds,omitempty"`
}

type UDSTransport struct {
	// UDSName is the name of the unix domain socket to connect to konnectivity server
	// This does not use a unix:// prefix. (Eg: /etc/srv/kubernetes/konnectivity-server/konnectivity-server.socket)
	UDSName string `json:"udsName,omitempty"`
}

type UserValidationRule struct {
	// expression represents the expression which will be evaluated by CEL.
	// Must return true for the validation to pass.
	//
	// CEL expressions have access to the contents of UserInfo, organized into CEL variable:
	// - 'user' - authentication.k8s.io/v1, Kind=UserInfo object
	//    Refer to https://github.com/kubernetes/api/blob/release-1.28/authentication/v1/types.go#L105-L122 for the definition.
	//    API documentation: https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.28/#userinfo-v1-authentication-k8s-io
	//
	// Documentation on CEL: https://kubernetes.io/docs/reference/using-api/cel/
	//
	// +required
	Expression string `json:"expression"`

	// message customizes the returned error message when rule returns false.
	// message is a literal string.
	// +optional
	Message string `json:"message,omitempty"`
}

type WebhookConfiguration struct {
	// The duration to cache 'authorized' responses from the webhook
	// authorizer.
	// Same as setting `--authorization-webhook-cache-authorized-ttl` flag
	// Default: 5m0s
	AuthorizedTTL metav1.Duration `json:"authorizedTTL"`
	// CacheAuthorizedRequests specifies whether authorized requests should be cached.
	// If set to true, the TTL for cached decisions can be configured via the
	// AuthorizedTTL field.
	// Default: true
	// +optional
	CacheAuthorizedRequests *bool `json:"cacheAuthorizedRequests,omitempty"`
	// The duration to cache 'unauthorized' responses from the webhook
	// authorizer.
	// Same as setting `--authorization-webhook-cache-unauthorized-ttl` flag
	// Default: 30s
	UnauthorizedTTL metav1.Duration `json:"unauthorizedTTL"`
	// CacheUnauthorizedRequests specifies whether unauthorized requests should be cached.
	// If set to true, the TTL for cached decisions can be configured via the
	// UnauthorizedTTL field.
	// Default: true
	// +optional
	CacheUnauthorizedRequests *bool `json:"cacheUnauthorizedRequests,omitempty"`
	// Timeout for the webhook request
	// Maximum allowed value is 30s.
	// Required, no default value.
	Timeout metav1.Duration `json:"timeout"`
	// The API version of the authorization.k8s.io SubjectAccessReview to
	// send to and expect from the webhook.
	// Same as setting `--authorization-webhook-version` flag
	// Valid values: v1beta1, v1
	// Required, no default value
	SubjectAccessReviewVersion string `json:"subjectAccessReviewVersion"`
	// MatchConditionSubjectAccessReviewVersion specifies the SubjectAccessReview
	// version the CEL expressions are evaluated against
	// Valid values: v1
	// Required, no default value
	MatchConditionSubjectAccessReviewVersion string `json:"matchConditionSubjectAccessReviewVersion"`
	// Controls the authorization decision when a webhook request fails to
	// complete or returns a malformed response or errors evaluating
	// matchConditions.
	// Valid values:
	//   - NoOpinion: continue to subsequent authorizers to see if one of
	//     them allows the request
	//   - Deny: reject the request without consulting subsequent authorizers
	// Required, with no default.
	FailurePolicy string `json:"failurePolicy"`

	// ConnectionInfo defines how we talk to the webhook
	ConnectionInfo WebhookConnectionInfo `json:"connectionInfo"`

	// matchConditions is a list of conditions that must be met for a request to be sent to this
	// webhook. An empty list of matchConditions matches all requests.
	// There are a maximum of 64 match conditions allowed.
	//
	// The exact matching logic is (in order):
	//   1. If at least one matchCondition evaluates to FALSE, then the webhook is skipped.
	//   2. If ALL matchConditions evaluate to TRUE, then the webhook is called.
	//   3. If at least one matchCondition evaluates to an error (but none are FALSE):
	//      - If failurePolicy=Deny, then the webhook rejects the request
	//      - If failurePolicy=NoOpinion, then the error is ignored and the webhook is skipped
	MatchConditions []WebhookMatchCondition `json:"matchConditions"`
}

type WebhookConnectionInfo struct {
	// Controls how the webhook should communicate with the server.
	// Valid values:
	// - KubeConfigFile: use the file specified in kubeConfigFile to locate the
	//   server.
	// - InClusterConfig: use the in-cluster configuration to call the
	//   SubjectAccessReview API hosted by kube-apiserver. This mode is not
	//   allowed for kube-apiserver.
	Type string `json:"type"`

	// Path to KubeConfigFile for connection info
	// Required, if connectionInfo.Type is KubeConfig
	KubeConfigFile *string `json:"kubeConfigFile"`
}

type WebhookMatchCondition struct {
	// expression represents the expression which will be evaluated by CEL. Must evaluate to bool.
	// CEL expressions have access to the contents of the SubjectAccessReview in v1 version.
	// If version specified by subjectAccessReviewVersion in the request variable is v1beta1,
	// the contents would be converted to the v1 version before evaluating the CEL expression.
	//
	// - 'resourceAttributes' describes information for a resource access request and is unset for non-resource requests. e.g. has(request.resourceAttributes) && request.resourceAttributes.namespace == 'default'
	// - 'nonResourceAttributes' describes information for a non-resource access request and is unset for resource requests. e.g. has(request.nonResourceAttributes) && request.nonResourceAttributes.path == '/healthz'.
	// - 'user' is the user to test for. e.g. request.user == 'alice'
	// - 'groups' is the groups to test for. e.g. ('group1' in request.groups)
	// - 'extra' corresponds to the user.Info.GetExtra() method from the authenticator.
	// - 'uid' is the information about the requesting user. e.g. request.uid == '1'
	//
	// Documentation on CEL: https://kubernetes.io/docs/reference/using-api/cel/
	Expression string `json:"expression"`
}